ORIENTAL MOTOR
Items 1 - 20 of 168
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 167 r/min
Three-Phase 200 VAC / 60 Hz: 200 r/min
Three-Phase 220 VAC / 60 Hz: 200 r/min
Three-Phase 230 VAC VAC / 60 Hz: 200 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.36 N·m
Three-Phase 200 VAC / 60 Hz: 0.3 N·m
Three-Phase 220 VAC / 60 Hz: 0.3 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 5×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6SMB-90S motor with electromagnetic brake WK2 series
2IK6SMB-75S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 200 r/min
Three-Phase 200 VAC / 60 Hz: 240 r/min
Three-Phase 220 VAC / 60 Hz: 240 r/min
Three-Phase 230 VAC VAC / 60 Hz: 240 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.3 N·m
Three-Phase 200 VAC / 60 Hz: 0.25 N·m
Three-Phase 220 VAC / 60 Hz: 0.25 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.25 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 3.4×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6SMB-6S motor with electromagnetic brake WK2 series
2IK6SMB-60S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 300 r/min
Three-Phase 200 VAC / 60 Hz: 360 r/min
Three-Phase 220 VAC / 60 Hz: 360 r/min
Three-Phase 230 VAC VAC / 60 Hz: 360 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.2 N·m
Three-Phase 200 VAC / 60 Hz: 0.17 N·m
Three-Phase 220 VAC / 60 Hz: 0.17 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.17 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 1.55×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 50
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 30 r/min
Three-Phase 200 VAC / 60 Hz: 36 r/min
Three-Phase 220 VAC / 60 Hz: 36 r/min
Three-Phase 230 VAC VAC / 60 Hz: 36 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.6 N·m
Three-Phase 200 VAC / 60 Hz: 1.4 N·m
Three-Phase 220 VAC / 60 Hz: 1.4 N·m
Three-Phase 230 VAC VAC / 60 Hz: 1.4 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 500 r/min
Three-Phase 200 VAC / 60 Hz: 600 r/min
Three-Phase 220 VAC / 60 Hz: 600 r/min
Three-Phase 230 VAC VAC / 60 Hz: 600 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.12 N·m
Three-Phase 200 VAC / 60 Hz: 0.1 N·m
Three-Phase 220 VAC / 60 Hz: 0.1 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.1 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 0.55×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6SMB-36S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 50 r/min
Three-Phase 200 VAC / 60 Hz: 60 r/min
Three-Phase 220 VAC / 60 Hz: 60 r/min
Three-Phase 230 VAC VAC / 60 Hz: 60 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.1 N·m
Three-Phase 200 VAC / 60 Hz: 0.9 N·m
Three-Phase 220 VAC / 60 Hz: 0.9 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.9 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 55×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 417 r/min
Three-Phase 200 VAC / 60 Hz: 500 r/min
Three-Phase 220 VAC / 60 Hz: 500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 500 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.14 N·m
Three-Phase 200 VAC / 60 Hz: 0.12 N·m
Three-Phase 220 VAC / 60 Hz: 0.12 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.12 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 0.8×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Items 1 - 20 of 168