ORIENTAL MOTOR
Items 1 - 50 of 82
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
K-series torque motor – variants (power, shaft type, voltage)
The K-series torque motors are suitable for applications with constant traction and simple speed control via the supply voltage.
Please select the service first; then the wave type and voltage are automatically limited to the available combinations.
Characteristics
- High start-up torque, falling torque-speed characteristic (torque ~ U2).
- Operation as a brake possible (direct current for constant tractive force).
- Integrated thermal protection (automatically resetting).
- Degree of protection IP20.
- contain capacitor (J/U/E depending on voltage); Not specified on the nameplate.
- Accessories such as capstan included; Gearbox available separately (can only be combined with pinion shaft); not included in this variant article.
Varianten & Hinweise
- Performance: 3 W, 6 W, 10 W, 20 W.
- Wellenart: Pinion shaft "GN" or round shaft "A" (round shaft can be combined without transmission).
Voltage: 100 V / 110-115 V / 200 V / 220-230 V.
- (Angular gears cannot be combined.)
(capacitor type J/U/E depending on the voltage variant); Not separately selectable.
Scope of delivery
- Motor including suitable operating capacitor and capacitor cap.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 80 mm
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Maximum Output Current/ Input at Maximum Output Power (5 Minutes Service Rating）: single-Phase 220 VAC / 50 Hz / 0.41 A / 80 W
single-Phase 230 VAC / 50 Hz / 0.45 A / 90 W
single-Phase 220 VAC / 60 Hz / 0.39 A / 80 W
single-Phase 230 VAC / 60 Hz / 0.4 A / 80 W - Voltage/ Frequency/ Maximum Output Current/ Input at Maximum Output Power (Continuous Service Rating): single-Phase 115 VAC / 50 Hz / 0.18 A / 20 W
single-Phase 115 VAC / 60 Hz / 0.24 A / 25 W - Starting Torque (Motor Shaft, 5 Minutes Service Rating): single-Phase 220 VAC / 50 Hz: 220 mN·m
single-Phase 230 VAC / 50 Hz: 220 mN·m
single-Phase 220 VAC / 60 Hz: 210 mN·m
single-Phase 230 VAC / 60 Hz: 210 mN·m - Starting Torque (Motor Shaft, Continuous Service Rating): single-Phase 115 VAC / 50 Hz: 65 mN·m
single-Phase 115 VAC / 60 Hz: 70 mN·m - Maximum Output Power (5 Minutes Service Rating): single-Phase 220 VAC / 50 Hz: 10 W
single-Phase 230 VAC / 50 Hz: 10 W
single-Phase 220 VAC / 60 Hz: 12 W
single-Phase 230 VAC / 60 Hz: 12 W - Maximum Output Power (Continuous Service Rating): single-Phase 115 VAC / 50Hz: 2.8 W
single-Phase 115 VAC / 60Hz: 3.3 W - Speed at Maximum Output Power/ Torque at Maximum Output Power (Motor Shaft, 5 Minutes Service Rating): single-Phase 220 VAC / 50 Hz: 750 r/min / 130 mN·m
single-Phase 230 V / 50 Hz: 750 r/min / 130 mN·m
single-Phase 220 VAC / 60 Hz: 900 r/min / 130 mN·m
single-Phase 230 V / 60 Hz: 900 r/min / 130 mN·m - Speed at Maximum Output Power/ Torque at Maximum Output Power (Motor Shaft, Continuous Service Rating): single-Phase 115 VAC / 50 Hz: 750 r/min / 35 mN·m
single-Phase 115 VAC / 60 Hz: 900 r/min / 35 mN·m - Permissible Inertia J: Depends on the combination gear head.
- capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Output power: 40 W
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 40 W
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 40 W
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 40 W
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 90 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 1 - 50 of 82