MP-DC motors
Protection class IP40 - Voltages between 12V and 170 Volt are available. Speed 3000 min-1
These permanent magnet DC motors are manufactured in four outer diameter sizes - ø48, ø65, ø80 and ø110 mm - with different lengths, covering power ranges up to 500 watts. Each of these sizes can be customised in terms of power supply, speed, connection configuration, options and more. A standard self-ventilation system can be supplied on request to achieve a power increase of approx. 30 %. Additional options are available for power ranges above 500 watts to allow an even higher level of customisation: The technical department is ready to solve any project at no additional cost in order to obtain the most suitable product for the customer's requirements.
MP80.05X — Permanent magnet DC motor
Series overview. The operating points and mechanics of the selected article variant apply.
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 350 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 18 | A |
| Rated torque | 1.11 | Nm |
| Duty type | S1 | |
| Maximum current | 36 | A |
| Operating data · Operating point 2 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 350 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | On request | A |
| Rated torque | 1.11 | Nm |
| Duty type | S1 | |
| Maximum current | 15 | A |
| Design and mechanics | ||
| Housing diameter | 110 | mm |
| Mounting | Depending on version | |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.
MP80.10X — Permanent magnet DC motor
Series overview. The operating points and mechanics of the selected article variant apply.
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (12 V DC) | ||
| Rated voltage | 12 | V DC |
| Output power | 250 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 35 | A |
| Rated torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 60 | A |
| Operating data · Operating point 2 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 250 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 17.5 | A |
| Rated torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 35 | A |
| Operating data · Operating point 3 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 320 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 22.4 | A |
| Rated torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 45 | A |
| Operating data · Operating point 4 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 500 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 35 | A |
| Rated torque | 1.6 | Nm |
| Duty type | S1 | |
| Maximum current | 60 | A |
| Operating data · Operating point 5 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 500 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 17.5 | A |
| Rated torque | 1.6 | Nm |
| Duty type | S1 | |
| Maximum current | 35 | A |
| Design and mechanics | ||
| Housing diameter | 110 | mm |
| Mounting | Depending on version | |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.