KEMMERICH ELEKTROMOTOREN
Contents: 1 elastic coupling element E for a PTTO coupling, size 280. Both hubs and taper bushes are not included.
Use with two matching F and/or H hubs of the same size. E identifies the elastic element, not a hub arrangement.
Image illustrates the design; see datasheet for dimensions.
Contents: 1 hub F for a PTTO coupling, size 280. Elastic element and taper bush are not included.
The taper bush can be installed from the shaft end.
Suitable taper bush: 3525; available bore range: 35-90 mm. Order the bush separately with a bore matching the shaft. The range does not specify a selected shaft bore.
Ratings for the matching complete taper-bushed coupling: nominal torque 3150 Nm; maximum speed 2200 min-1.
Image illustrates the design; see datasheet for dimensions.
Contents: 1 hub H for a PTTO coupling, size 280. Elastic element and taper bush are not included.
The taper bush can be installed from the hub side.
Suitable taper bush: 3525; available bore range: 35-90 mm. Order the bush separately with a bore matching the shaft. The range does not specify a selected shaft bore.
Ratings for the matching complete taper-bushed coupling: nominal torque 3150 Nm; maximum speed 2200 min-1.
Image illustrates the design; see datasheet for dimensions.
Contents per set: 2x HUB PTTO 280 F + 1x COUPLING SPIDER PTTO 280 E. Taper bushes are not included.
For taper bush 3525; bore range 35-90 mm, depending on the selected bush; nominal torque 3150 Nm; maximum speed 2200 min-1. The bore range does not specify a selected shaft bore.
Installation requires two 3525 taper bushes. Select and order each bush bore separately to match its shaft diameter.
Both taper bushes can be installed from the respective shaft end (2x F).
Contents per set: 1x HUB PTTO 280 H + 1x HUB PTTO 280 F + 1x COUPLING SPIDER PTTO 280 E. Taper bushes are not included.
For taper bush 3525; bore range 35-90 mm, depending on the selected bush; nominal torque 3150 Nm; maximum speed 2200 min-1. The bore range does not specify a selected shaft bore.
Installation requires two 3525 taper bushes. Select and order each bush bore separately to match its shaft diameter.
One taper bush can be installed from the hub side (H), the other from the shaft end (F).
Contents per set: 2x HUB PTTO 280 H + 1x COUPLING SPIDER PTTO 280 E. Taper bushes are not included.
For taper bush 3525; bore range 35-90 mm, depending on the selected bush; nominal torque 3150 Nm; maximum speed 2200 min-1. The bore range does not specify a selected shaft bore.
Installation requires two 3525 taper bushes. Select and order each bush bore separately to match its shaft diameter.
Both taper bushes can be installed from the respective hub side (2x H).