KEMMERICH ELEKTROMOTOREN

• PROTECTION DEGREE: IP23
• RATED VOLTAGE: 400 V
• NUMBER OF POLES: 4
• DUTY TYPE: S1 / S6-40%
• RATED SPEED: 1110 min^-1
• RATED FREQUENCY: 38,9 Hz
• OUTPUT POWER: 8,9 kW (S1) / 12,4 kW (S6-40%)
• RATED TORQUE: 76,4 Nm (S1) / 107,0 Nm (S6-40%)
• RATED CURRENT: 20,0 A (S1) / 28,0 A (S6-40%)
• EFFICIENCY: 80,5 %
• CONSTANT-POWER RANGE max.: 1800 min^-1 (S1) / 1350 min^-1 (S6-40%)
• COOLING: IC06
• INSULATION CLASS: F
• MAX. MECHANICAL SPEED: 9000 min^-1; may be further limited by encoder feedback or brake
• DIMENSIONS B/O/X/Y: 264 / 455 / 200 / 195 mm

• PROTECTION DEGREE: IP23
• RATED VOLTAGE: 400 V
• NUMBER OF POLES: 4
• DUTY TYPE: S1 / S6-40%
• RATED SPEED: 1810 min^-1
• RATED FREQUENCY: 56,7 Hz
• OUTPUT POWER: 12,9 kW (S1) / 18,1 kW (S6-40%)
• RATED TORQUE: 76,8 Nm (S1) / 107,5 Nm (S6-40%)
• RATED CURRENT: 29,0 A (S1) / 40,6 A (S6-40%)
• EFFICIENCY: 81,0 %
• CONSTANT-POWER RANGE max.: 2600 min^-1 (S1) / 1950 min^-1 (S6-40%)
• COOLING: IC06
• INSULATION CLASS: F
• MAX. MECHANICAL SPEED: 9000 min^-1; may be further limited by encoder feedback or brake
• DIMENSIONS B/O/X/Y: 264 / 455 / 200 / 195 mm

• PROTECTION DEGREE: IP23
• RATED VOLTAGE: 400 V
• NUMBER OF POLES: 4
• DUTY TYPE: S1 / S6-40%
• RATED SPEED: 2220 min^-1
• RATED FREQUENCY: 76,0 Hz
• OUTPUT POWER: 17,4 kW (S1) / 24,3 kW (S6-40%)
• RATED TORQUE: 74,7 Nm (S1) / 104,6 Nm (S6-40%)
• RATED CURRENT: 38,5 A (S1) / 53,9 A (S6-40%)
• EFFICIENCY: 82,0 %
• CONSTANT-POWER RANGE max.: 3600 min^-1 (S1) / 2700 min^-1 (S6-40%)
• COOLING: IC06
• INSULATION CLASS: F
• MAX. MECHANICAL SPEED: 9000 min^-1; may be further limited by encoder feedback or brake
• DIMENSIONS B/O/X/Y: 264 / 455 / 200 / 195 mm

• PROTECTION DEGREE: IP23
• RATED VOLTAGE: 400 V
• NUMBER OF POLES: 4
• DUTY TYPE: S1 / S6-40%
• RATED SPEED: 2480 min^-1
• RATED FREQUENCY: 84,3 Hz
• OUTPUT POWER: 18,5 kW (S1) / 25,9 kW (S6-40%)
• RATED TORQUE: 71,1 Nm (S1) / 99,8 Nm (S6-40%)
• RATED CURRENT: 40,5 A (S1) / 56,7 A (S6-40%)
• EFFICIENCY: 82,5 %
• CONSTANT-POWER RANGE max.: 4000 min^-1 (S1) / 3000 min^-1 (S6-40%)
• COOLING: IC06
• INSULATION CLASS: F
• MAX. MECHANICAL SPEED: 9000 min^-1; may be further limited by encoder feedback or brake
• DIMENSIONS B/O/X/Y: 264 / 455 / 200 / 195 mm

• PROTECTION DEGREE: IP23
• RATED VOLTAGE: 400 V
• NUMBER OF POLES: 4
• DUTY TYPE: S1 / S6-40%
• RATED SPEED: 2790 min^-1
• RATED FREQUENCY: 94,8 Hz
• OUTPUT POWER: 20,5 kW (S1) / 28,7 kW (S6-40%)
• RATED TORQUE: 70,3 Nm (S1) / 98,4 Nm (S6-40%)
• RATED CURRENT: 45,3 A (S1) / 63,4 A (S6-40%)
• EFFICIENCY: 83,0 %
• CONSTANT-POWER RANGE max.: 4450 min^-1 (S1) / 3350 min^-1 (S6-40%)
• COOLING: IC06
• INSULATION CLASS: F
• MAX. MECHANICAL SPEED: 9000 min^-1; may be further limited by encoder feedback or brake
• DIMENSIONS B/O/X/Y: 264 / 455 / 200 / 195 mm

• PROTECTION DEGREE: IP23
• RATED VOLTAGE: 400 V
• NUMBER OF POLES: 4
• DUTY TYPE: S1 / S6-40%
• RATED SPEED: 3390 min^-1
• RATED FREQUENCY: 114,7 Hz
• OUTPUT POWER: 24,2 kW (S1) / 33,9 kW (S6-40%)
• RATED TORQUE: 68,2 Nm (S1) / 95,5 Nm (S6-40%)
• RATED CURRENT: 54,0 A (S1) / 75,6 A (S6-40%)
• EFFICIENCY: 83,5 %
• CONSTANT-POWER RANGE max.: 5450 min^-1 (S1) / 4100 min^-1 (S6-40%)
• COOLING: IC06
• INSULATION CLASS: F
• MAX. MECHANICAL SPEED: 9000 min^-1; may be further limited by encoder feedback or brake
• DIMENSIONS B/O/X/Y: 264 / 455 / 200 / 195 mm

one-quadrant thyristor controller for regulating inductive and ohmic loads

with potential-free control electronics for
Drive in a direction of rotation
- Speed control and torque control
- Armature voltage or tachovoltage control with IxR - compensation
- Voltage regulation and current regulation for inductive and ohmic consumers
- Connection for field voltage 210 or 360 Vdc present max. 1,5 A

Uin 360...440 VAC/50-60Hz
Uou 0-300 VDC
Inn 15 A (max. 30 A for 5 seconds)
Electrical power 2,7 kW
Input current 16,5 A
Built-in switchgear cabinet
Protection category IP00, covered in a contact-resistant manner
Operating range 0... 45°C
Structure: Wall mounting Bx HxT 200x160x112mm
incl. EG installation declaration with disassembly, operation & maintenance instructions

Actual value transmitters to be used:
DC tachometer generators
- Brushless tachometer generators with evaluation electronics
- Incremental encoder with evaluation electronics
AC or three-phase tachometer with rectification

u.U. mains chokes K78-16 (1,2 mH) and/or armature smoothing chokes EI135A-16 (33 mH) are required

The thyristor power converters are constructed as switchgear cabinet-mounted device posts VDE guidelines. The control electronics are galvanically separated from the power part. The air and creep routes are >8mm. The power semiconductors are generously dimensioned. Only commercially available components are used in the industry standard.

The most important operating states are indicated with light-emitting diodes. The PI setting of the current regulators is done with two 4-switches. The devices are covered in a contact-proof manner. The electronic control system is plugged on at the front and is freely accessible. As far as possible, plug-in terminals are used for the connection. The high-current connections shall be connected to power terminals or stud bolts. The output stage is a semi-controlled bridge circuit.

Summary
- with high accuracy
- differential amplifier, steepness limiter (integrator adjustable)
- speed controller (RVU) with PI circuit, actual value difference input,
- nominal current output static and dynamic current limit,
- Speed-dependent current limit (commutation limit).
- High-impedance armature voltage input, nominal value zero circuit,
- Release logic. Solder-free balancing, control bus, BTB relay.
- Notifications: Standstill, blocked, speed break.

one-quadrant thyristor controller for regulating inductive and ohmic loads

with potential-free control electronics for
Drive in a direction of rotation
- Speed control and torque control
- Armature voltage or tachovoltage control with IxR - compensation
- Voltage regulation and current regulation for inductive and ohmic consumers

Uin 360...440 VAC/50-60Hz
Uou 0-300 VDC
Inn 25 A (max. 50 A for 5 seconds)
Electrical power 4,5 kW
Input current 27,5 A
Built-in switchgear cabinet
Protection category IP00, covered in a contact-resistant manner
Operating range 0... 45°C
Structure: Wall mounting Bx HxT 200x160x112 mm
incl. EG installation declaration with disassembly, operation & maintenance instructions

Actual value transmitters to be used:
DC tachometer generators
- Brushless tachometer generators with evaluation electronics
- Incremental encoder with evaluation electronics
AC or three-phase tachometer with rectification

u.U. mains chokes K78-16 (1,2 mH) and/or armature smoothing chokes EI135A-16 (33 mH) are required

The thyristor power converters are constructed as switchgear cabinet-mounted device posts VDE guidelines. The control electronics are galvanically separated from the power part. The air and creep routes are >8mm. The power semiconductors are generously dimensioned. Only commercially available components are used in the industry standard.

The most important operating states are indicated with light-emitting diodes. The PI setting of the current regulators is done with two 4-switches. The devices are covered in a contact-proof manner. The electronic control system is plugged on at the front and is freely accessible. As far as possible, plug-in terminals are used for the connection. The high-current connections shall be connected to power terminals or stud bolts. The output stage is a semi-controlled bridge circuit.

Summary
- with high accuracy
- differential amplifier, steepness limiter (integrator adjustable)
- speed controller (RVU) with PI circuit, actual value difference input,
- nominal current output static and dynamic current limit,
- Speed-dependent current limit (commutation limit).
- High-impedance armature voltage input, nominal value zero circuit,
- Release logic. Solder-free balancing, control bus, BTB relay.
- Notifications: Standstill, blocked, speed break.

Motor continuous current: 25 A
Motor peak current: 50 A
System frequency: 50 Hz
Degree of protection: IP00
Input current: 20 A
El. Performance: 11,25 kW
Measurements BxHxT: 200x160x127 mm
Mains voltage: 3x400V~
Motor voltage: 0 to 450V= DC
Control electronics: REGxxS (potential-free)
Moisture stress: Category F DIN 40040
Standing height: < 1000m über NN
Operating range: 0... 45° C,
                      Extended Bb. Until 60°C red. 2%/ °C
Input signal: 0... +10 Volt =
Plus Net choke: KD2,5-25, 0,7 mH 3AC
plus armature throttle: EI1135B-24, 16 mH

FOUR-QUADRANT-controller with a circuit-free
double-phase bridge B6-B6 (energy return)

Motor continuous current: 40 A
Motor peak current: 80 A (5 seconds)
System frequency: 50 Hz
Degree of protection: Protection category IP00, covered in a contact-resistant manner
Input current: 32 A
El. Performance: 18 kW
Measurements BxHxT: 290x230x190 mm
Mains voltage: 3x400V~ (option 500/600 V3AC), 50/60 Hz
Motor voltage: 0 to 450V= DC (option 550V DC)
Control electronics: REGxxS (potential-free)
Moisture stress: Category F DIN 40040
Standing height: < 1000m über NN
Operating range: 0... 45° C, until 60°C red. 2%/°C
Input signal: 0... +10 Volt =
Plus Net choke: KD2,5-50; 0,4 mH
plus armature throttle: EI150B-35; 8 mH
(Anchor throttles are only necessary for a few applications)

Characteristics:
• 4 Quadrant control - driving and braking in all FOUR-QUADRANT
• Energy return
Potential-free control electronics by means of current generator and ignition transformer
Selective thyristor control
Dynamic overcurrent factor 2 for 5 seconds
Potential-free speed or torque control
• Armature voltage regulation with high-ohm potential coupling
• Fast, accurate ANALOGUE control for speed and torque or voltage
• Linear steepness limiter (integrator) for setpoint value
• Rotary field and safety monitoring
• Control electronics with plug terminal connection
• Power connection with terminals or busbars
• Control voltage alternatively 230 or 400V
• Torque control or current control (0/4-20mA) possible (specify when ordering)
• Field rectifiers unregulated or regulated
• Intrinsically safe performance part
• Temperature monitoring power component
• Structure: Wall installation

• analogue control electronics
• Differentiation amplifier
• Speed controller (RVU) with PI circuitry
• Actual value difference input
current setpoint output
• Static and dynamic current limit
rpm-dependent current limit (commutation limit)
rated value zero circuit
• Release logic
• Solder-free matching
• Control bus
• Operational relays

FOUR-QUADRANT-controller with a circuit-free
double-phase bridge B6-B6 (energy return)

Motor continuous current: 60 A
Motor peak current: 120 A (5 seconds)
System frequency: 50 Hz
Degree of protection: Protection category IP00, covered in a contact-resistant manner
Input current: 48 A
El. Performance: 33 kW
Measurements BxHxT: 290x230x230 mm
Mains voltage: 3x400V~ (option 500/600 V3AC), 50/60 Hz
Motor voltage: 0 to 450V= DC (option 550V DC)
Control electronics: REGxxS (potential-free)
Moisture stress: Category F DIN 40040
Standing height: < 1000m über NN
Operating range: 0... 45° C, until 60°C red. 2%/°C
Input signal: 0... +10 Volt =
Plus Net choke: KD3-75; 0,3 mH
Plus Armature throttle: EI150A-50; 4 mH
(Anchor throttles are only necessary for a few applications)

Characteristics:
• 4 Quadrant control - driving and braking in all FOUR-QUADRANT
• Energy return
Potential-free control electronics by means of current generator and ignition transformer
Selective thyristor control
Dynamic overcurrent factor 2 for 5 seconds
Potential-free speed or torque control
• Armature voltage regulation with high-ohm potential coupling
• Fast, accurate ANALOGUE control for speed and torque or voltage
• Linear steepness limiter (integrator) for setpoint value
• Rotary field and safety monitoring
• Control electronics with plug terminal connection
• Power connection with terminals or busbars
• Control voltage alternatively 230 or 400V
• Torque control or current control (0/4-20mA) possible (specify when ordering)
• Field rectifiers unregulated or regulated
• Intrinsically safe performance part
• Temperature monitoring power component
• Structure: Wall installation

• analogue control electronics
• Differentiation amplifier
• Speed controller (RVU) with PI circuitry
• Actual value difference input
current setpoint output
• Static and dynamic current limit
rpm-dependent current limit (commutation limit)
rated value zero circuit
• Release logic
• Solder-free matching
• Control bus
• Operational relays