Induction motors
Items 1 - 30 of 479
Best sellers
• Description of Specification Items
- Frame Size: 80 mm
- Output Power: 25 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.113 A
Three-Phase380 VAC / 60 Hz / 0.102 A
Three-Phase400 VAC / 50 Hz / 0.116 A
Three-Phase400 VAC / 60 Hz / 0.103 A
Three-Phase415 VAC / 50 Hz / 0.118 A - Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 270 mN·m
Three-Phase 380 VAC / 60 Hz: 220 mN·m
Three-Phase 400 VAC / 50 Hz: 270 mN·m
Three-Phase 400 VAC / 60 Hz: 220 mN·m
Three-Phase 415 VAC / 50 Hz: 270 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 205 mN·m / 1200 r/min
Three-Phase 380 VAC / 60 Hz: 170 mN·m / 1450 r/min
Three-Phase 400 VAC / 50 Hz: 205 mN·m / 1200 r/min
Three-Phase 400 VAC / 60 Hz: 170 mN·m / 1450 r/min
Three-Phase 415 VAC / 50 Hz: 205 mN·m / 1200 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
5IK90GE-UW2T2 general-purpose motor WK2 series
• The product name written on the motor nameplate is 4IK40A-DW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 80 mm
- Output Power: 40 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.39 A
single-Phase 200 VAC / 60 Hz / 0.37 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 90 mN·m
single-Phase 200 VAC / 60 Hz: 90 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 160 mN·m / 2400 r/min
single-Phase 200 VAC / 60 Hz: 135 mN·m / 2900 r/min - capacitor: Product name: CH23BFAUL, Capacity: 2.3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.5 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
0IK1GN-AW2J general-purpose motor WK2 series
0IK1GN-AW3U general-purpose motor WK2 series
0IK1GN-CW2J general-purpose motor WK2 series
• The product name written on the motor nameplate is 0IK3GN-BW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 3 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.109 A
single-Phase 100 VAC / 60 Hz / 0.123 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 6 mN·m
single-Phase 100 VAC / 60 Hz: 6 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 12 mN·m / 2400 r/min
single-Phase 100 VAC / 60 Hz: 10 mN·m / 3000 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH18FAUL, Capacity: 1.8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
0IK3GN-BW3U general-purpose motor WK2 series
- Frame Size: 42 mm
- Output Power: 200 VAC / 50 Hz: 2.5 W
200 VAC / 60 Hz: 3 W - series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.057 A
single-Phase 200 VAC / 60 Hz / 0.064 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 5 mN·m
single-Phase 200 VAC / 60 Hz: 5 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 9.5 mN·m / 2500 r/min
single-Phase 200 VAC / 60 Hz: 9.5 mN·m / 3100 r/min - The Speed When Installing gearhead:
This depends on the gearhead used.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Item: Specifications
- Insulation Resistance: After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
- Dielectric Strength: After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
- Temperature Rise: A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 75 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity.
- Thermal Class: UL/CSA Standards: 105 (A), EN Standards: 120 (E)
- Overheat Protective Device: Impedance Protected
- Operating Ambient Temperature: -10~+40 °C (Non-freezing)
- Operating Ambient Humidity: 85 % max. (Non-condensing)
- Degree of Protection: IP20
• The product name written on the motor nameplate is 2IK6A-AW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (2IK6A-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The product name written on the motor nameplate is 2IK6A-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2IK6A-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.1 A
single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 45 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
2IK6AB-100S general-purpose motor WK2 series
2IK6AB-12.5S general-purpose motor WK2 series
2IK6AB-120S general-purpose motor WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 10 r/min
single-Phase 100 VAC / 60 Hz: 12 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 3 N·m
single-Phase 100 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 100 r/min
single-Phase 100 VAC / 60 Hz: 120 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.6 N·m
single-Phase 100 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 8.3 r/min
single-Phase 100 VAC / 60 Hz: 10 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 3 N·m
single-Phase 100 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6AB-18S general-purpose motor WK2 series
2IK6AB-25S general-purpose motor WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 416 r/min
single-Phase 100 VAC / 60 Hz: 500 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.14 N·m
single-Phase 100 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 50 r/min
single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 1.1 N·m
single-Phase 100 VAC / 60 Hz: 0.9 N·m - Permissible Inertia J: 55×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 41 r/min
single-Phase 100 VAC / 60 Hz: 50 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 1.3 N·m
single-Phase 100 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 500 r/min
single-Phase 100 VAC / 60 Hz: 600 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.12 N·m
single-Phase 100 VAC / 60 Hz: 0.1 N·m - Permissible Inertia J: 0.55×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6AB-50S general-purpose motor WK2 series
2IK6AB-5S general-purpose motor WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 60
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 25 r/min
single-Phase 100 VAC / 60 Hz: 30 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 1.9 N·m
single-Phase 100 VAC / 60 Hz: 1.6 N·m - Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 250 r/min
single-Phase 100 VAC / 60 Hz: 300 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.24 N·m
single-Phase 100 VAC / 60 Hz: 0.2 N·m - Permissible Inertia J: 2.2×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 200 r/min
single-Phase 100 VAC / 60 Hz: 240 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.3 N·m
single-Phase 100 VAC / 60 Hz: 0.25 N·m - Permissible Inertia J: 3.4×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6AB-75S general-purpose motor WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 90
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 16.6 r/min
single-Phase 100 VAC / 60 Hz: 20 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 2.9 N·m
single-Phase 100 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Items 1 - 30 of 479