HM series
Three-phase motors for operation with our frequency inverters, up to a maximum speed of 30,000 min-1. Available in air-cooled or water-cooled versions.
Cylindrical shaft with keyway
3.50 kW S1 – 100%; 380 V 3AC; 12,000 rpm; 200 Hz; 2.80 Nm; 8.4 A
4.20 kW S6 – 40%; 380 V 3AC; 12,000 rpm; 200 Hz; 3.30 Nm; 10.5 A
Efficiency 0.82; power factor 0.86; rotation direction left
Protection class IP50; double bearing (A-side) for milling applications
Insulation class F; connector on top; mounting from below; with Bimetal Temperature Switch
Delivery includes mating connector
Type ER32 DIN 6499 shaft with nut, without collet
7,0 kW S1/100%; 220/380 V 3AC; 14.000 1/min; 467 Hz; 4,8 Nm; 28,7/16,6 A
10,0 kW S6/40%; 220/380 V 3AC; 14.000 1/min; 467 Hz; 6,9 Nm; 41,0/23,7 A
7,0 kW S1/100%; 220/380 V 3AC; 18.000 1/min; 600 Hz; 3,7 Nm; 28,7/16,6 A
10,0 kW S6/40%; 220/380 V 3AC; 18.000 1/min; 600 Hz; 5,3 Nm; 41,0/23,7 A
6,0 kW S1/100%; 220/380 V 3AC; 24.000 1/min; 800 Hz; 2,4 Nm; 26,0/15,0 A
8,6 kW S6/40%; 220/380 V 3AC; 24.000 1/min; 800 Hz; 3,4 Nm; 37,0/21,4 A
efficiency 0,82; power factor 0,86; Wave thread on the right/direction of rotation on the left
Degree of protection IP50; 4-pole; Insulation class F; Mounting at bottom
With bi-metal temperature switch
A-side with angular ball bearings; B-side with deep-groove ball bearing
For constant torque until standstill
With external cooling, axial fan 92×92×38 mm, 6000 min−1
„3214 JN“ ebm-papst 24 VDC 0,27 A 6,5 W (11…28 VDC)
noise level 51 dB; temperature range –20 … +70 °C
Volume flow rate 130 m3/h
Life L10 at 40 °C: 70 000 h
Engine protection: Reversal of polarity and blocking protection
Authorisations: VDE, CSA, UL
3.90 kW S1-100%; 380 V3AC; 18000 min-1; 300 Hz; 2.07 Nm; 08.3 A
5.10 kW S6-040% 380 V3AC; 18000 min-1; 300 Hz; 2.71 Nm; 10.56 A
3.50 kW S1-100%; 380 V3AC; 24000 min-1; 400 Hz; 1.39 Nm; 07.4 A
4.50 kW S6-040% 380 V3AC; 24000 min-1; 400 Hz; 1.79 Nm; 10.00 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting laterally right + left
with bimetal temperature switch; Delivery incl. mating plug
For constant torque to zero speed
6.00 kW S1-100%; 220 V3AC; 18000 min-1; 300 Hz; 3.18 Nm; 21.8 A
7.20 kW S6-040% 220 V3AC; 18000 min-1; 300 Hz; 3.82 Nm; 26.8 A
5.50 kW S1-100%; 220 V3AC; 24000 min-1; 400 Hz; 2.19 Nm; 20.8 A
6.50 kW S6-040% 220 V3AC; 24000 min-1; 400 Hz; 2.59 Nm; 24.2 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; terminal box at the top; Mounting at bottom
with bimetal temperature switch
6.00 kW S1-100%; 380 V3AC; 18000 min-1; 300 Hz; 3.18 Nm; 12.6 A
7.20 kW S6-040% 380 V3AC; 18000 min-1; 300 Hz; 3.82 Nm; 15.5 A
5.50 kW S1-100%; 380 V3AC; 24000 min-1; 400 Hz; 2.19 Nm; 12.0 A
6.50 kW S6-040% 380 V3AC; 24000 min-1; 400 Hz; 2.59 Nm; 14.0 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; top/front plug; Mounting at bottom
with bimetal temperature switch; Delivery incl. mating plug
6.00 kW S1-100%; 380 V3AC; 18000 min-1; 300 Hz; 3.18 Nm; 12.6 A
7.20 kW S6-040% 380 V3AC; 18000 min-1; 300 Hz; 3.82 Nm; 15.5 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting at bottom
with bimetal temperature switch; Delivery incl. mating plug
6.00 kW S1-100%; 380 V3AC; 18000 min-1; 300 Hz; 3.18 Nm; 12.6 A
7.20 kW S6-040% 380 V3AC; 18000 min-1; 300 Hz; 3.82 Nm; 15.5 A
5.50 kW S1-100%; 380 V3AC; 24000 min-1; 400 Hz; 2.19 Nm; 12.0 A
6.50 kW S6-040% 380 V3AC; 24000 min-1; 400 Hz; 2.59 Nm; 14.0 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; top/front plug; Mounting at bottom
with bimetal temperature switch; Delivery incl. mating plug
shaft type ER32 DIN 6499 without collet chuck; Self-cooling IC411
4.50 kW S1-100%; 380 V3AC; 18000 min-1; 300 Hz; 2.39 Nm; 09.7 A
5.40 kW S6-040% 380 V3AC; 18000 min-1; 300 Hz; 2.86 Nm; 11.6 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Delivery incl. mating plug
5,0 kW, 4,0 Nm (S1-100%ED), 10,6 A; 380 V3AC; 12000 1/min; 200 Hz *base point
6,0 kW, 4,8 Nm (S6-040%ED), 12,7 A; 380 V3AC; 12000 1/min; 200 Hz
double bearing (A-side) for, among other things, milling applications
Mounting below; with bimetal temperature switch
incl. mating plugs
3.50 kW S1-100%; 220 V3AC; 12000 min-1; 200 Hz; 2.80 Nm; 14.5 A
4.20 kW S6-040% 220 V3AC; 12000 min-1; 200 Hz; 3.30 Nm; 17.4 A
eta 0,82, cos phi 0,86
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; Delivery incl. mating plug
3.50 kW S1-100%; 380 V3AC; 12000 min-1; 200 Hz; 2.80 Nm; 08.4 A
4.20 kW S6-040% 380 V3AC; 12000 min-1; 200 Hz; 3.30 Nm; 10.5 A
eta 0,82, cos phi 0,86
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; Delivery incl. mating plug
High-speed three-phase engine
Shaft type ER25 DIN 6499 without collet; self-cooling IC411
3.00 kW S1-100% ED; 380 V3AC; 18000 1/min; 300 Hz; 1,59 Nm; 7,7 A
3.60 kW S6-040% ED; 380 V3AC; 18000 1/min; 300 Hz; 1,91 Nm; 9,3 A
3.00 kW S1-100% ED; 380 V3AC; 21000 1/min; 350 Hz; 1.36 Nm; 7.7 A
3.60 kW S6-040% ED; 380 V3AC; 21000 1/min; 350 Hz; 1,64 Nm; 9,3 A
2.50 kW S1-100% ED; 380 V3AC; 24000 1/min; 400 Hz; 0.99 Nm; 6.4 A
3.20 kW S6-040% ED; 380 V3AC; 24000 1/min; 400 Hz; 1,27 Nm; 8,2 A
Protection class IP50; double bearing (A-side) for e.g. Milling applications
insulation class F; plug on top; mounting on bottom; with bi-metal temperature switch
Shaft thread right/Direction of rotation left; Efficiency 75%; No Of poles 2
Delivery incl. mating connector
• Datasheet
• STEP 3D model
1.00 kW S1-100%; 220 V3AC; 12000 min-1; 200 Hz; 0,80 Nm
1.30 kW S6-060% 220 V3AC; 12000 min-1; 200 Hz; 1,03 Nm
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; Delivery incl. mating plug
1,50 kW S1-100 %; 380 V3AC; 18000 min-1; 300 Hz; 0,80 Nm
1,80 kW S6-060 % 380 V3AC; 18000 min-1; 300 Hz; 1,03 Nm
1,50 kW S1-100 %; 380 V3AC; 21000 min-1; 350 Hz
1,20 kW S1-100 %; 380 V3AC; 24000 min-1; 400 Hz
1,60 kW S6-060 %; 380 V3AC; 24000 min-1; 400 Hz
protection class IP50; double bearing (A-side) e.g. B. For milling applications
insulation class F; plugs at the top; Mounting below; with bimetallic temperature switch
Wave thread right/direction of rotation left; Delivery incl. mating plug
shaft type ER25 DIN 6499 without collet chuck; Self-cooling IC411
3.00 kW S1-100% ED; 220 V3AC; 18000 1/min; 300 Hz; 1,59 Nm; 13,3 A
3.60 kW S6-040% ED; 220 V3AC; 18000 1/min; 300 Hz; 1,91 Nm; 16,0 A
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; efficiency 75%; Pole number 2
Delivery incl. mating plug
shaft type ER25 DIN 6499 without collet chuck; Self-cooling IC411
3.00 kW S1-100% ED; 380 V3AC; 18000 1/min; 300 Hz; 1,59 Nm; 7,7 A
3.60 kW S6-040% ED; 380 V3AC; 18000 1/min; 300 Hz; 1,91 Nm; 9,3 A
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; efficiency 75%; Pole number 2
Delivery incl. mating plug
shaft type ER25 DIN 6499 without collet chuck; Self-cooling IC411
2,00 kW S1-100% ED; 380 V3AC; 12000 1/min; 200 Hz; 1,59 Nm; 5,0 A
2,40 kW S6-040% ED; 380 V3AC; 12000 1/min; 200 Hz; 1,91 Nm; 6,0 A
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; efficiency 73%; Pole number 2
Delivery incl. mating plug
