HM series
Three-phase motors for operation with our frequency inverters, up to a maximum speed of 30,000 min-1. Available in air-cooled or water-cooled versions.
shaft type ER20 DIN 6499 without collet chuck; Self-cooling IC411
0.65 kW S1; 220 V3AC; 12000 1/min; 200 Hz; 3.2 A; 0.52 Nm; eta 65%; cos phi 0.75
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; Moment of inertia 0.00012 kgm2
Delivery incl. mating plug
• Data sheet
Shaft type ER20 DIN 6499 without collet; self-ventilated (IC411)
1.00 kW S1; 220 V 3AC; 18,000 rpm; 300 Hz; 5.5 A; power factor 0.75; 0.53 Nm
1.00 kW S1; 220 V 3AC; 21,000 rpm; 350 Hz; 5.5 A; power factor 0.75; 0.46 Nm
1.00 kW S1; 220 V 3AC; 24,000 rpm; 400 Hz; 5.5 A; power factor 0.75; 0.40 Nm
Protection class IP50; double bearing (A-side) for milling applications
Insulation class F; connector on top/front; mounting from below; with Bimetal Temperature Switch
Shaft thread right-hand / rotation direction left; moment of inertia 0.00012 kg·m2
Delivery includes mating connector
shaft type ER25 DIN 6499 without collet chuck; Self-cooling IC411
3.00 kW S1-100% ED; 220 V3AC; 18000 1/min; 300 Hz; 1,59 Nm; 13,3 A
3.60 kW S6-040% ED; 220 V3AC; 18000 1/min; 300 Hz; 1,91 Nm; 16,0 A
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; efficiency 75%; Pole number 2
Delivery incl. mating plug
1.00 kW S1-100%; 220 V3AC; 12000 min-1; 200 Hz; 0,80 Nm
1.30 kW S6-060% 220 V3AC; 12000 min-1; 200 Hz; 1,03 Nm
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; Delivery incl. mating plug
shaft type ER25 DIN 6499 without collet chuck; Self-cooling IC411
1.50 kW S1-100%; 220 V3AC; 18000 min-1; 300 Hz; 6.9 A
1.50 kW S1-100%; 220 V3AC; 21000 min-1; 350 Hz; 6.9 A
1.20 kW S1-100%; 220 V3AC; 24000 min-1; 400 Hz; 5.5 A
1.80 kW S6-060%; 220 V3AC; 24000 min-1; 400 Hz; 7.2 A
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left
Degree of protection IP50