HM series
Three-phase motors for operation with our frequency inverters, up to a maximum speed of 30,000 min-1. Available in air-cooled or water-cooled versions.
shaft type ER20 DIN 6499 without collet chuck; Self-cooling IC411
0.65 kW S1-100%; 12000 1/min; 380 V3AC; 200 Hz; 1.8 A; 0.52 Nm
0.85 kW S1-040%; 12000 1/min; 380 V3AC; 200 Hz; 2.3 A; 0.68 Nm
eta 65%; cos phi 0.75; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Delivery incl. mating plug
shaft type ER20 DIN 6499 without collet chuck; Self-cooling IC411
0.65 kW S1; 220 V3AC; 12000 1/min; 200 Hz; 3.2 A; 0.52 Nm; eta 65%; cos phi 0.75
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Wave thread right/direction of rotation left; Moment of inertia 0.00012 kgm2
Delivery incl. mating plug
• Data sheet
6.00 kW S1-100%; 380 V3AC; 18000 min-1; 300 Hz; 3.18 Nm; 12.6 A
7.20 kW S6-040% 380 V3AC; 18000 min-1; 300 Hz; 3.82 Nm; 15.5 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting at bottom
with bimetal temperature switch; Delivery incl. mating plug
0.65 kW S1-100%; 12000 1/min; 380 V3AC; 200 Hz; 1.8 A; 0.52 Nm
0.85 kW S1-040%; 12000 1/min; 380 V3AC; 200 Hz; 2.3 A; 0.68 Nm
eta 65%; cos phi 0.75; Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; plugs at the top; Mounting below; with bimetal temperature switch
Delivery incl. mating plug