HM series
Three-phase motors for operation with our frequency inverters, up to a maximum speed of 30,000 min-1. Available in air-cooled or water-cooled versions.
shaft type ER20 DIN 6499 including nut without collet; Self-cooling IC411
1.00 kW S1-100%; 18000 1/min; 380 V3AC; 300 Hz; 3.2 A; 0.53 Nm
1.30 kW S1-040%; 18000 1/min; 380 V3AC; 300 Hz; 4.2 A; 0.69 Nm
1.00 kW S1-100%; 21000 1/min; 380 V3AC; 350 Hz; 3.2 A; 0.45 Nm
1.30 kW S1-040%; 21000 1/min; 380 V3AC; 350 Hz; 4.2 A; 0.59 Nm
1.00 kW S1-100%; 24000 1/min; 380 V3AC; 400 Hz; 3.2 A; 0.40 Nm
1.30 kW S1-040%; 24000 1/min; 380 V3AC; 400 Hz; 4.2 A; 0.52 Nm
eta 65%; cos phi 0.75; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; top/front plug; Mounting below; with bimetal temperature switch
Delivery incl. mating plug
shaft type ER20 DIN 6499 without collet chuck; Self-cooling IC411
1.00 kW S1-100%; 18000 1/min; 380 V3AC; 300 Hz; 3.2 A; 0.53 Nm
1.30 kW S1-040%; 18000 1/min; 380 V3AC; 300 Hz; 4.2 A; 0.69 Nm
1.00 kW S1-100%; 21000 1/min; 380 V3AC; 350 Hz; 3.2 A; 0.45 Nm
1.30 kW S1-040%; 21000 1/min; 380 V3AC; 350 Hz; 4.2 A; 0.59 Nm
1.00 kW S1-100%; 24000 1/min; 380 V3AC; 400 Hz; 3.2 A; 0.40 Nm
1.30 kW S1-040%; 24000 1/min; 380 V3AC; 400 Hz; 4.2 A; 0.52 Nm
eta 65%; cos phi 0.75; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; top/front plug; Mounting below, laterally right and left
with bimetal temperature switch
Delivery incl. mating plug
shaft type ER20 DIN 6499 without collet chuck; Cooling with liquid
1.00 kW; 220 V3AC; 30000 1/min; 500 Hz; 2.0 A; S1-100%; 0.32 Nm
1.30 kW; 220 V3AC; 30000 1/min; 500 Hz; 2.4 A; S6-060%; 0.38 Nm
base point 220 V3AC; 18000 1/min; 300 Hz; 3.2 A; S1-100%; 0.53 Nm
double bearing (A-side) for, among other things, milling applications
Mounting below; With a thermal bimetal switch
Delivery incl. mating plug
Shaft type ER20 DIN 6499 without collet; self-ventilated (IC411)
1.00 kW S1; 220 V 3AC; 18,000 rpm; 300 Hz; 5.5 A; power factor 0.75; 0.53 Nm
1.00 kW S1; 220 V 3AC; 21,000 rpm; 350 Hz; 5.5 A; power factor 0.75; 0.46 Nm
1.00 kW S1; 220 V 3AC; 24,000 rpm; 400 Hz; 5.5 A; power factor 0.75; 0.40 Nm
Protection class IP50; double bearing (A-side) for milling applications
Insulation class F; connector on top/front; mounting from below; with Bimetal Temperature Switch
Shaft thread right-hand / rotation direction left; moment of inertia 0.00012 kg·m2
Delivery includes mating connector