Calpeda
Items 1 - 7 of 7
- Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
- bronze version; Pump housing and lantern of bronze CC480K
- water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
- 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,55 kW / 0,75 HP
- Maximum power consumption P1: 0,78 kW
- Rated current: 4,5 A at 230 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IPX4
- Insulation class: F
- Operation mode: S1 (continuous duty)
- Flow according to characteristic curve: to 15 m3/h
- Maximum pump head according to the characteristic curve: 13 m
- Characteristic curve Q/H: 0 m3/h → 13 m; 6,6 m3/h → 12 m; 9,6 m3/h → 11 m; 10,8 m3/h → 10 m; 12 m3/h → 9,5 m; 13,2 m3/h → 9 m; 15 m3/h → 8 m
- Maximum water temperature: 60 °C
- Maximum ambient temperature: 40 °C
- Total suction height: to 7 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G2; Printing page DN2 G2
- Dimensions: a 195 mm; b 50 mm; fM 510 mm; g1 12 mm; h1 230 mm; h2 50 mm; h5 330 mm; HD 228 mm; l1 106 mm; l2 99 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 14 mm; w 220 mm
- Weight: 33,7 kg
- Materials: bronze impeller CC480K (plated brass P-Cu Zn 40 Pb 2 in the case of BNMP 32/12); shaft AISI 316; bronze CC480K sieve cover; filter AISI 304; Slip ring seal carbon/ceramic/FPM
- Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
- Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
- cast iron design; Pump housing and lantern made of GJL 200 with cataphoresis coating
- water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
- 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,55 kW / 0,75 HP
- Maximum power consumption P1: 0,78 kW
- Rated current: 4,5 A at 230 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IPX4
- Insulation class: F
- Operation mode: S1 (continuous duty)
- Flow according to characteristic curve: to 15 m3/h
- Maximum pump head according to the characteristic curve: 13 m
- Characteristic curve Q/H: 0 m3/h → 13 m; 6,6 m3/h → 12 m; 9,6 m3/h → 11 m; 10,8 m3/h → 10 m; 12 m3/h → 9,5 m; 13,2 m3/h → 9 m; 15 m3/h → 8 m
- Maximum water temperature: 60 °C
- Maximum ambient temperature: 40 °C
- Total suction height: to 7 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G2; Printing page DN2 G2
- Dimensions: a 195 mm; b 50 mm; fM 510 mm; g1 12 mm; h1 230 mm; h2 50 mm; h5 330 mm; HD 228 mm; l1 106 mm; l2 99 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 14 mm; w 220 mm
- Weight: 29,7 kg
- Materials: impeller GJL 200 (plated brass P-Cu Zn 40 Pb 2 in the case of NMP 32/12); shaft AISI 303; sieve cover GJL 200; filter AISI 304; Slip ring seal carbon/ceramic/FPM
- Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
- Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,45 kW / 0,6 HP
- Maximum power consumption P1: 0,67 kW
- Rated current: 3,6 A at 230 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 1,89 m3/h
- Maximum pump head according to the characteristic curve: 38 m
- Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 9 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
- Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
- Article weight: 9,7 kg
- Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Revision: A
- Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,15 kW / 0,2 HP
- Maximum power consumption P1: 0,29 kW
- Rated current: 1,6 A at 230 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 0,75 m3/h
- Maximum pump head according to the characteristic curve: 21,2 m
- Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 9 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
- Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
- Article weight: 6,3 kg
- Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,45 kW / 0,6 HP
- Maximum power consumption P1: 0,67 kW
- Rated current: 3,5 A at 230 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 1,89 m3/h
- Maximum pump head according to the characteristic curve: 38 m
- Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 9 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
- Dimensions: a 72 mm; A 100 mm; a1 23 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 272 mm; H 63 mm; h1 126 mm; h2 27 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 17 mm; w 109 mm
- Article weight: 7,6 kg
- Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
- Design: Stainless steel design with jacket housing of AISI 304
- Applications: For water supply, home and garden applications and watering
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,37 kW / 0,5 HP
- Maximum power consumption P1: 0,57 kW
- Rated current: 3 A for 230 V
- Rated speed: 2800 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: S3 60 %
- Flow according to characteristic curve: up to 4 m3/h
- Maximum pump head according to the characteristic curve: 32 m
- Characteristic curve Q/H: 0 m3/h → 32 m; 1 m3/h → 28 m; 2 m3/h → 24 m; 3 m3/h → 19 m; 4 m3/h → 14 m
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 8 m
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
- Dimensions: a 115 mm; b 30 mm; fM 362 mm; g1 10 mm; h1 116 mm; h2 61 mm; HD 176 mm; l5 161 mm; m1 33 mm; m3 8 mm; n1 146 mm; n2 112 mm; s 9 mm; w 102 mm; w1 102 mm
- Article weight: 6,8 kg
- Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55
- Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 0,15 kW / 0,2 HP
- Maximum power consumption P1: 0,29 kW
- Rated current: 1,6 A at 230 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 0,75 m3/h
- Maximum pump head according to the characteristic curve: 21,2 m
- Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 9 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
- Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
- Article weight: 5,9 kg
- Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Items 1 - 7 of 7