Calpeda
Items 1 - 2 of 2
Discharge connection:
G 3/4"
Motor type:
Three-phase motor
Scope of supply:
Single pump
Reset all filters
- Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 0,45 kW / 0,6 HP
- Rated current: 2,3 A at 230 V / 1,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 1,89 m3/h
- Maximum pump head according to the characteristic curve: 38 m
- Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 9 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
- Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
- Article weight: 9 kg
- Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Revision: A
- Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 0,45 kW / 0,6 HP
- Rated current: 2,8 A at 230 V / 1,6 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE2
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 1,89 m3/h
- Maximum pump head according to the characteristic curve: 38 m
- Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 9 m
- Maximum permissible working pressure: 6 bar
- Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
- Dimensions: a 72 mm; A 100 mm; a1 23 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 272 mm; H 63 mm; h1 126 mm; h2 27 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 17 mm; w 109 mm
- Article weight: 7,5 kg
- Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Items 1 - 2 of 2