Calpeda
Items 1 - 9 of 9
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 1,5 kW / 2 HP
- Maximum power consumption P1: 2 kW
- Rated current: 9,2 A at 230 V
- Rated speed: 2800 min-1
- Degree of protection: IP54
- Insulation class: F
- Operation mode: S3 60 %
- Flow according to characteristic curve: to 8,4 m3/h
- Maximum pump head according to the characteristic curve: 46,5 m
- Characteristic curve Q/H: 0 m3/h → 46,5 m; 0,5 m3/h → 45 m; 1 m3/h → 43,5 m; 2 m3/h → 40,5 m; 2,4 m3/h → 39,3 m; 3 m3/h → 37,5 m; 3,2 m3/h → 37 m; 3,6 m3/h → 36 m; 4 m3/h → 35 m; 4,5 m3/h → 33,5 m; 5 m3/h → 32,5 m; 5,5 m3/h → 31,2 m; 6 m3/h → 30 m; 6,5 m3/h → 28,5 m; 7 m3/h → 27,5 m; 8 m3/h → 25,5 m; 8,4 m3/h → 24,5 m3/h
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
- Article weight: 17,4 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer single-phase induction motor with thermal protection
- Rated voltage: 230 V ±10 %, 50 Hz
- Engine rated power P2: 1,5 kW / 2 HP
- Maximum power consumption P1: 2 kW
- Rated current: 9,2 A at 230 V
- Rated speed: 2800 min-1
- Degree of protection: IP54
- Insulation class: F
- Operation mode: S3 60 %
- Flow according to characteristic curve: up to 6 m3/h
- Maximum pump head according to the characteristic curve: 58 m
- Characteristic curve Q/H: 0 m3/h → 58 m; 0,5 m3/h → 54,7 m; 1 m3/h → 51,5 m; 2 m3/h → 46 m; 2,4 m3/h → 44 m; 3 m3/h → 41,3 m; 3,2 m3/h → 40,4 m; 3,6 m3/h → 38,7 m; 4 m3/h → 37 m; 4,5 m3/h → 34,7 m; 5 m3/h → 32,5 m; 5,5 m3/h → 30,5 m; 6 m3/h → 28,5 m
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
- Article weight: 17,4 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 1,5 kW / 2 HP
- Rated current: 7,5 A at 230 V / 4,3 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 8,4 m3/h
- Maximum pump head according to the characteristic curve: 46,5 m
- Characteristic curve Q/H: 0 m3/h → 46,5 m; 0,5 m3/h → 45 m; 1 m3/h → 43,5 m; 2 m3/h → 40,5 m; 2,4 m3/h → 39,3 m; 3 m3/h → 37,5 m; 3,2 m3/h → 37 m; 3,6 m3/h → 36 m; 4 m3/h → 35 m; 4,5 m3/h → 33,5 m; 5 m3/h → 32,5 m; 5,5 m3/h → 31,2 m; 6 m3/h → 30 m; 6,5 m3/h → 28,5 m; 7 m3/h → 27,5 m; 8 m3/h → 25,5 m; 8,4 m3/h → 24,5 m3/h
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
- Article weight: 17,3 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Revision: A
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 1,5 kW / 2 HP
- Rated current: 7,5 A at 230 V / 4,3 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: up to 6 m3/h
- Maximum pump head according to the characteristic curve: 58 m
- Characteristic curve Q/H: 0 m3/h → 58 m; 0,5 m3/h → 54,7 m; 1 m3/h → 51,5 m; 2 m3/h → 46 m; 2,4 m3/h → 44 m; 3 m3/h → 41,3 m; 3,2 m3/h → 40,4 m; 3,6 m3/h → 38,7 m; 4 m3/h → 37 m; 4,5 m3/h → 34,7 m; 5 m3/h → 32,5 m; 5,5 m3/h → 30,5 m; 6 m3/h → 28,5 m
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
- Article weight: 18,1 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Revision: A
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 1,1 kW / 1,5 HP
- Rated current: 4,5 A at 230 V / 2,6 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 8,4 m3/h
- Maximum pump head according to the characteristic curve: 35,5 m
- Characteristic curve Q/H: 0 m3/h → 35,5 m; 0,3 m3/h → 34,8 m; 0,5 m3/h → 34,3 m; 1 m3/h → 33 m; 2 m3/h → 30,5 m; 2,4 m3/h → 29,5 m; 3 m3/h → 28 m; 3,2 m3/h → 27,5 m; 3,6 m3/h → 26,4 m; 4 m3/h → 25,3 m; 4,5 m3/h → 24 m; 5 m3/h → 23 m; 5,5 m3/h → 22 m; 6 m3/h → 21 m; 6,5 m3/h → 20,3 m; 7 m3/h → 19,5 m; 8 m3/h → 18 m; 8,4 m3/h → 17,5 m3/h
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 147 mm
- Article weight: 14,8 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 1,1 kW / 1,5 HP
- Rated current: 4,5 A at 230 V / 2,6 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: up to 5 m3/h
- Maximum pump head according to the characteristic curve: 48 m
- Characteristic curve Q/H: 0 m3/h → 48 m; 0,3 m3/h → 46 m; 0,5 m3/h → 45 m; 1 m3/h → 42,5 m; 2 m3/h → 37 m; 2,4 m3/h → 35 m; 3 m3/h → 32,5 m; 3,2 m3/h → 31,7 m; 3,6 m3/h → 30,1 m; 4 m3/h → 28,5 m; 4,5 m3/h → 27 m; 5 m3/h → 25 m
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 147 mm
- Article weight: 14,8 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
- Design: Stainless steel design with pump housing and housing cover from AISI 304
- Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 1,1 kW / 1,5 HP
- Rated current: 4,5 A at 230 V / 2,6 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 4,5 m3/h
- Maximum pump head according to the characteristic curve: 57,5 m
- Characteristic curve Q/H: 0 m3/h → 57,5 m; 0,3 m3/h → 54 m; 0,5 m3/h → 52 m; 1 m3/h → 47,3 m; 2 m3/h → 40 m; 2,4 m3/h → 37,5 m; 3 m3/h → 34 m; 3,2 m3/h → 32,9 m; 3,6 m3/h → 30,7 m; 4 m3/h → 28,5 m; 4,5 m3/h → 26 m3/h
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 147 mm
- Article weight: 14,8 kg
- Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; Brass runner
- Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
- Design: Stainless steel design with jacket housing of AISI 304
- Applications: For water supply, home and garden applications and watering
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 1,1 kW / 1,5 HP
- Rated current: 4,5 A at 230 V / 2,6 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: up to 8 m3/h
- Maximum pump head according to the characteristic curve: 56 m
- Characteristic curve Q/H: 0 m3/h → 56 m; 2 m3/h → 51 m; 3 m3/h → 47,5 m; 4 m3/h → 42,5 m; 5 m3/h → 36,5 m; 6 m3/h → 30 m; 6,5 m3/h → 26,5 m; 7 m3/h → 23 m; 8 m3/h → 14 m
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 8 m
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 147 mm; w1 147 mm
- Article weight: 14,5 kg
- Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55
- Revision: A
- Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
- Design: Stainless steel design with jacket housing of AISI 304
- Applications: For water supply, home and garden applications and watering
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 0,75 kW / 1 HP
- Rated current: 3,7 A at 230 V / 2,2 A at 400 V
- Rated speed: 2800 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: up to 5 m3/h
- Maximum pump head according to the characteristic curve: 55,5 m
- Characteristic curve Q/H: 0 m3/h → 55,5 m; 1 m3/h → 50 m; 2 m3/h → 43 m; 3 m3/h → 35,5 m; 4 m3/h → 26,6 m; 4,5 m3/h → 21,4 m; 5 m3/h → 15,5 m
- Media temperature: 0 to +35 °C
- Maximum ambient temperature: to 40 °C
- Suction height: to 8 m
- Maximum permissible working pressure: 8 bar
- Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
- Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 147 mm; w1 147 mm
- Article weight: 12,8 kg
- Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55
- Revision: BB
Items 1 - 9 of 9