Skip to main content Skip to search Skip to navigation

Calpeda

Standard Item name from A to Z Item name from Z to A Price in ascending order Price in descending order Weight SKU Release date Newest first GTIN Bestsellers
10 20 30 40 50
Items 41 - 60 of 70
Voltage: 230/400 V3AC Scope of supply: Single pump Self-priming: Yes Reset all filters
BCA 90/A self-priming liquid ring pump
BCA 90/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 47 m
  • Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 10,9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71810030000
Shipping weight:
14.17 kg
Item weight:
10.90 kg
957,78 € *
Available
Delivery time: ca. 3 weeks
NG 6/18/A self-priming jet pump with built-in ejector
NG 6/18/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 67,3 m
  • Characteristic curve Q/H: 0 m3/h → 67,3 m; 0,5 m3/h → 64,5 m; 1 m3/h → 62 m; 1,5 m3/h → 59 m; 2 m3/h → 56 m; 2,5 m3/h → 54 m; 3 m3/h → 51 m; 3,5 m3/h → 48,5 m; 4 m3/h → 46 m; 4,5 m3/h → 43,5 m; 5 m3/h → 41,5 m; 5,5 m3/h → 39 m; 6 m3/h → 36,5 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 29,7 kg
  • Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
70A00044200
Shipping weight:
38.61 kg
Item weight:
29.70 kg
939,95 € *
Available
Delivery time: ca. 3 weeks
NG 6/22/A self-priming jet pump with built-in ejector
NG 6/22/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 53 m
  • Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 51,5 m; 1 m3/h → 50 m; 1,5 m3/h → 48,5 m; 2 m3/h → 47 m; 2,5 m3/h → 46 m; 3 m3/h → 44,5 m; 3,5 m3/h → 43 m; 4 m3/h → 41,5 m; 4,5 m3/h → 40 m; 5 m3/h → 39 m; 5,5 m3/h → 37,5 m; 6 m3/h → 36,5 m; 6,5 m3/h → 35 m; 7 m3/h → 33,5 m; 8 m3/h → 31 m; 9 m3/h → 28,5 m; 9,5 m3/h → 27 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 29,7 kg
  • Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
70A00045200
Shipping weight:
38.61 kg
Item weight:
29.70 kg
939,95 € *
Available
Delivery time: ca. 3 weeks
BCA 80/A self-priming liquid ring pump
BCA 80/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,45 kW / 0,6 HP
  • Rated current: 2,3 A at 230 V / 1,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 1,89 m3/h
  • Maximum pump head according to the characteristic curve: 38 m
  • Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
  • Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
  • Article weight: 9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71810020000
Shipping weight:
11.70 kg
Item weight:
9.00 kg
847,38 € *
Available
Delivery time: ca. 3 weeks
A 40-110A/B self-priming centrifugal pump with open impeller
A 40-110A/B self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 18 m3/h
  • Maximum pump head according to the characteristic curve: 17,2 m
  • Characteristic curve Q/H: 0 m3/h → 17,2 m; 3,6 m3/h → 15,4 m; 4,8 m3/h → 14,9 m; 6 m3/h → 14,2 m; 7,5 m3/h → 13,3 m; 8,4 m3/h → 12,9 m; 9,6 m3/h → 12,1 m; 10,8 m3/h → 11,3 m; 12 m3/h → 10,5 m; 15 m3/h → 8,4 m; 18 m3/h → 5,6 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
  • Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
  • Article weight: 20,7 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
60F00382000
Shipping weight:
26.91 kg
Item weight:
20.70 kg
841,20 € *
Available
Delivery time: ca. 3 weeks
NG 5/16/A self-priming jet pump with built-in ejector
NG 5/16/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 4,5 m3/h
  • Maximum pump head according to the characteristic curve: 64 m
  • Characteristic curve Q/H: 0 m3/h → 64 m; 0,5 m3/h → 59 m; 1 m3/h → 54 m; 1,5 m3/h → 50 m; 2 m3/h → 46 m; 2,5 m3/h → 43 m; 3 m3/h → 40 m; 3,5 m3/h → 37 m; 4 m3/h → 34,5 m; 4,5 m3/h → 32 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 28,1 kg
  • Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
70A00041200
Shipping weight:
36.53 kg
Item weight:
28.10 kg
831,02 € *
Available
Delivery time: ca. 3 weeks
NG 5/22/A self-priming jet pump with built-in ejector
NG 5/22/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 36,5 m
  • Characteristic curve Q/H: 0 m3/h → 36,5 m; 0,5 m3/h → 35,5 m; 1 m3/h → 34,5 m; 1,5 m3/h → 33 m; 2 m3/h → 31,5 m; 2,5 m3/h → 30,5 m; 3 m3/h → 29,5 m; 3,5 m3/h → 28 m; 4 m3/h → 27 m; 4,5 m3/h → 26 m; 5 m3/h → 25 m; 5,5 m3/h → 23,5 m; 6 m3/h → 23 m; 6,5 m3/h → 21,5 m; 7 m3/h → 20,5 m; 8 m3/h → 18,5 m; 9 m3/h → 16,5 m; 9,5 m3/h → 15,5 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 28,1 kg
  • Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
70A00043200
Shipping weight:
36.53 kg
Item weight:
28.10 kg
831,02 € *
Available
Delivery time: ca. 3 weeks
A 40-110B/A self-priming centrifugal pump with open impeller
A 40-110B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2900 min-1
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 18 m3/h
  • Maximum pump head according to the characteristic curve: 14,4 m
  • Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
  • Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
  • Article weight: 19,5 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
60F00341000
Shipping weight:
25.35 kg
Item weight:
19.50 kg
770,65 € *
Available
Delivery time: ca. 3 weeks
NGX 6/18/A self-priming stainless steel jet pump
NGX 6/18/A self-priming stainless steel jet pump
  • Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
  • Design: Stainless steel design with pump housing and housing cover from AISI 304
  • Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 58 m
  • Characteristic curve Q/H: 0 m3/h → 58 m; 0,5 m3/h → 54,7 m; 1 m3/h → 51,5 m; 2 m3/h → 46 m; 2,4 m3/h → 44 m; 3 m3/h → 41,3 m; 3,2 m3/h → 40,4 m; 3,6 m3/h → 38,7 m; 4 m3/h → 37 m; 4,5 m3/h → 34,7 m; 5 m3/h → 32,5 m; 5,5 m3/h → 30,5 m; 6 m3/h → 28,5 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
  • Article weight: 18,1 kg
  • Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; Brass runner
  • Revision: A
SKU:
72A50044200
Shipping weight:
23.53 kg
Item weight:
18.10 kg
765,60 € *
Available
Delivery time: ca. 3 weeks
NGX 6/22/A self-priming stainless steel jet pump
NGX 6/22/A self-priming stainless steel jet pump
  • Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
  • Design: Stainless steel design with pump housing and housing cover from AISI 304
  • Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 8,4 m3/h
  • Maximum pump head according to the characteristic curve: 46,5 m
  • Characteristic curve Q/H: 0 m3/h → 46,5 m; 0,5 m3/h → 45 m; 1 m3/h → 43,5 m; 2 m3/h → 40,5 m; 2,4 m3/h → 39,3 m; 3 m3/h → 37,5 m; 3,2 m3/h → 37 m; 3,6 m3/h → 36 m; 4 m3/h → 35 m; 4,5 m3/h → 33,5 m; 5 m3/h → 32,5 m; 5,5 m3/h → 31,2 m; 6 m3/h → 30 m; 6,5 m3/h → 28,5 m; 7 m3/h → 27,5 m; 8 m3/h → 25,5 m; 8,4 m3/h → 24,5 m3/h
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
  • Article weight: 17,3 kg
  • Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; Brass runner
  • Revision: A
SKU:
72A50045200
Shipping weight:
22.49 kg
Item weight:
17.30 kg
765,60 € *
Available
Delivery time: ca. 3 weeks
BCA 60E self-priming liquid ring pump
BCA 60E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,15 kW / 0,2 HP
  • Rated current: 1,7 A at 230 V / 1 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 0,75 m3/h
  • Maximum pump head according to the characteristic curve: 21,2 m
  • Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
  • Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
  • Article weight: 6,2 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
71820011000
Shipping weight:
8.06 kg
Item weight:
6.20 kg
741,85 € *
Available
Delivery time: ca. 3 weeks
MXA 405/A horizontal multi-stage self-priming centrifugal...
MXA 405/A horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,5 A at 230 V / 2,6 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 8 m3/h
  • Maximum pump head according to the characteristic curve: 56 m
  • Characteristic curve Q/H: 0 m3/h → 56 m; 2 m3/h → 51 m; 3 m3/h → 47,5 m; 4 m3/h → 42,5 m; 5 m3/h → 36,5 m; 6 m3/h → 30 m; 6,5 m3/h → 26,5 m; 7 m3/h → 23 m; 8 m3/h → 14 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 147 mm; w1 147 mm
  • Article weight: 14,5 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
  • Revision: A
SKU:
662A1051100
Shipping weight:
18.85 kg
Item weight:
14.50 kg
691,91 € *
Available
Delivery time: ca. 3 weeks
MXA 205/B horizontal multi-stage self-priming centrifugal...
MXA 205/B horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 5 m3/h
  • Maximum pump head according to the characteristic curve: 55,5 m
  • Characteristic curve Q/H: 0 m3/h → 55,5 m; 1 m3/h → 50 m; 2 m3/h → 43 m; 3 m3/h → 35,5 m; 4 m3/h → 26,6 m; 4,5 m3/h → 21,4 m; 5 m3/h → 15,5 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 147 mm; w1 147 mm
  • Article weight: 12,8 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
  • Revision: BB
SKU:
662A0051200
Shipping weight:
16.64 kg
Item weight:
12.80 kg
669,29 € *
Available
Delivery time: ca. 3 weeks
NGX 4/16 self-priming stainless steel jet pump
NGX 4/16 self-priming stainless steel jet pump
  • Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
  • Design: Stainless steel design with pump housing and housing cover from AISI 304
  • Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,5 A at 230 V / 2,6 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 4,5 m3/h
  • Maximum pump head according to the characteristic curve: 57,5 m
  • Characteristic curve Q/H: 0 m3/h → 57,5 m; 0,3 m3/h → 54 m; 0,5 m3/h → 52 m; 1 m3/h → 47,3 m; 2 m3/h → 40 m; 2,4 m3/h → 37,5 m; 3 m3/h → 34 m; 3,2 m3/h → 32,9 m; 3,6 m3/h → 30,7 m; 4 m3/h → 28,5 m; 4,5 m3/h → 26 m3/h
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 147 mm
  • Article weight: 14,8 kg
  • Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; Brass runner
SKU:
72A50370000
Shipping weight:
19.24 kg
Item weight:
14.80 kg
601,61 € *
Available
Delivery time: ca. 3 weeks
NGX 4/18 self-priming stainless steel jet pump
NGX 4/18 self-priming stainless steel jet pump
  • Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
  • Design: Stainless steel design with pump housing and housing cover from AISI 304
  • Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,5 A at 230 V / 2,6 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 5 m3/h
  • Maximum pump head according to the characteristic curve: 48 m
  • Characteristic curve Q/H: 0 m3/h → 48 m; 0,3 m3/h → 46 m; 0,5 m3/h → 45 m; 1 m3/h → 42,5 m; 2 m3/h → 37 m; 2,4 m3/h → 35 m; 3 m3/h → 32,5 m; 3,2 m3/h → 31,7 m; 3,6 m3/h → 30,1 m; 4 m3/h → 28,5 m; 4,5 m3/h → 27 m; 5 m3/h → 25 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 147 mm
  • Article weight: 14,8 kg
  • Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; Brass runner
SKU:
72A50371000
Shipping weight:
19.24 kg
Item weight:
14.80 kg
601,61 € *
Available
Delivery time: ca. 3 weeks
NGX 4/22 self-priming stainless steel jet pump
NGX 4/22 self-priming stainless steel jet pump
  • Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
  • Design: Stainless steel design with pump housing and housing cover from AISI 304
  • Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,5 A at 230 V / 2,6 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 8,4 m3/h
  • Maximum pump head according to the characteristic curve: 35,5 m
  • Characteristic curve Q/H: 0 m3/h → 35,5 m; 0,3 m3/h → 34,8 m; 0,5 m3/h → 34,3 m; 1 m3/h → 33 m; 2 m3/h → 30,5 m; 2,4 m3/h → 29,5 m; 3 m3/h → 28 m; 3,2 m3/h → 27,5 m; 3,6 m3/h → 26,4 m; 4 m3/h → 25,3 m; 4,5 m3/h → 24 m; 5 m3/h → 23 m; 5,5 m3/h → 22 m; 6 m3/h → 21 m; 6,5 m3/h → 20,3 m; 7 m3/h → 19,5 m; 8 m3/h → 18 m; 8,4 m3/h → 17,5 m3/h
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 147 mm
  • Article weight: 14,8 kg
  • Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; Brass runner
SKU:
72A50372000
Shipping weight:
19.24 kg
Item weight:
14.80 kg
601,61 € *
Available
Delivery time: ca. 3 weeks
CA 91/B self-priming liquid ring pump
CA 91/B self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 60 m
  • Characteristic curve Q/H: 0 m3/h → 60 m; 0,48 m3/h → 53 m; 0,6 m3/h → 51 m; 0,75 m3/h → 48 m; 1 m3/h → 44 m; 1,2 m3/h → 39 m; 1,5 m3/h → 34 m; 1,89 m3/h → 26,5 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 12 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
70820041000
Shipping weight:
15.60 kg
Item weight:
12.00 kg
566,81 € *
Available
Delivery time: ca. 3 weeks
MXA 404/B horizontal multi-stage self-priming centrifugal...
MXA 404/B horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,5 A at 230 V / 2 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 7 m3/h
  • Maximum pump head according to the characteristic curve: 45 m
  • Characteristic curve Q/H: 0 m3/h → 45 m; 2 m3/h → 40 m; 3 m3/h → 37 m; 4 m3/h → 33 m; 5 m3/h → 28 m; 6 m3/h → 22 m; 6,5 m3/h → 19 m; 7 m3/h → 15 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 115 mm; b 30 mm; fM 391 mm; g1 10 mm; h1 116 mm; h2 61 mm; HD 192 mm; l5 161 mm; m1 33 mm; m3 8 mm; n1 146 mm; n2 112 mm; s 9 mm; w 112 mm; w1 112 mm
  • Article weight: 10,8 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
  • Revision: BB
SKU:
662A1041100
Shipping weight:
14.04 kg
Item weight:
10.80 kg
515,13 € *
Available
Delivery time: ca. 3 weeks
NG 4/B self-priming jet pump with built-in ejector
NG 4/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 4 m3/h
  • Maximum pump head according to the characteristic curve: 45,8 m
  • Characteristic curve Q/H: 0 m3/h → 45,8 m; 0,25 m3/h → 41 m; 0,5 m3/h → 39 m; 1 m3/h → 36 m; 1,5 m3/h → 33 m; 2 m3/h → 31 m; 2,5 m3/h → 29 m; 3 m3/h → 26 m; 3,5 m3/h → 24 m; 4 m3/h → 21 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 127 mm; a1 8 mm; b 35 mm; fM 430 mm; g1 11 mm; h1 150 mm; h2 43 mm; HD 207 mm; m1 60 mm; m3 8 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 100 mm
  • Article weight: 19,3 kg
  • Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
70A40042000
Shipping weight:
25.09 kg
Item weight:
19.30 kg
484,42 € *
Available
Delivery time: ca. 3 weeks
CA 90/A self-priming liquid ring pump
CA 90/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 47 m
  • Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 10 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
70820030000
Shipping weight:
13.00 kg
Item weight:
10.00 kg
481,28 € *
Available
Delivery time: ca. 3 weeks
Items 41 - 60 of 70