Calpeda

BA 65-150B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 3 kW / 4 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 54 m3/h
Maximum pump head according to the characteristic curve: 22,8 m
Characteristic curve Q/H: 0 m3/h → 22,8 m; 15 m3/h → 21,5 m; 18 m3/h → 21 m; 24 m3/h → 19,5 m; 30 m3/h → 17,5 m; 33 m3/h → 16,5 m; 36 m3/h → 15,5 m; 42 m3/h → 12,5 m; 48 m3/h → 9,5 m; 54 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
Article weight: 58,6 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F01582000
Shipping weight:: 76.18 kg
Item weight:: 58.60 kg

4.063,60 € *

Available

Delivery time: ca. 3 weeks

BNMPM 50/12GE self-priming bronze centrifugal pump with pre-filter, 230 V

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
bronze version; Pump housing and lantern of bronze CC480K
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IPX4
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 60 m3/h
Maximum pump head according to the characteristic curve: 12,9 m
Characteristic curve Q/H: 0 m3/h → 12,9 m; 18,9 m3/h → 12 m; 21 m3/h → 12 m; 24 m3/h → 11,5 m; 30 m3/h → 10,5 m; 42 m3/h → 8 m; 48 m3/h → 7 m; 54 m3/h → 5 m; 60 m3/h → 3,5 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2 1/2; Printing page DN2 G2 1/2
Dimensions: a 205 mm; b 50 mm; fM 540 mm; g1 12 mm; h1 262 mm; h2 60 mm; h5 370 mm; HD 240 mm; l1 120 mm; l2 117 mm; m1 100 mm; m2 70 mm; n1 240 mm; n2 190 mm; n3 37 mm; s 14 mm; w 234 mm
Weight: 41,9 kg
Materials: bronze impeller CC480K (plated brass P-Cu Zn 40 Pb 2 in the case of BNMP 32/12); shaft AISI 316; bronze CC480K sieve cover; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures

SKU:: 61E0082G100
Shipping weight:: 54.47 kg
Item weight:: 41.90 kg

4.005,57 € *

Available

Delivery time: ca. 3 weeks

BNMP 50/12D/A self-priming bronze centrifugal pump with pre-filter

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
bronze version; Pump housing and lantern of bronze CC480K
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer three-phase induction motor
Rated voltage: 230/400 V ±10 %, 50 Hz
Engine rated power P2: 3 kW / 4 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IPX4
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 66 m3/h
Maximum pump head according to the characteristic curve: 19 m
Characteristic curve Q/H: 0 m3/h → 19 m; 18,9 m3/h → 18 m; 21 m3/h → 18 m; 24 m3/h → 17,5 m; 30 m3/h → 16,5 m; 42 m3/h → 15 m; 48 m3/h → 13 m; 54 m3/h → 11,5 m; 60 m3/h → 9,5 m; 66 m3/h → 7 m
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2 1/2; Printing page DN2 G2 1/2
Dimensions: a 205 mm; b 50 mm; fM 602 mm; g1 12 mm; h1 262 mm; h2 60 mm; h5 370 mm; HD 250 mm; l1 120 mm; l2 117 mm; m1 100 mm; m2 70 mm; n1 240 mm; n2 190 mm; n3 20 mm; s 14 mm; w 298 mm
Weight: 51,5 kg
Materials: bronze impeller CC480K (plated brass P-Cu Zn 40 Pb 2 in the case of BNMP 32/12); shaft AISI 316; bronze CC480K sieve cover; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
Revision: A

SKU:: 61D00862000
Shipping weight:: 66.95 kg
Item weight:: 51.50 kg

3.889,86 € *

Available

Delivery time: ca. 3 weeks

BNMPM 32/12SE self-priming bronze centrifugal pump with pre-filter, 230 V

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
bronze version; Pump housing and lantern of bronze CC480K
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IPX4
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 24 m3/h
Maximum pump head according to the characteristic curve: 23 m
Characteristic curve Q/H: 0 m3/h → 23 m; 6,6 m3/h → 22,5 m; 9,6 m3/h → 21,5 m; 10,8 m3/h → 21 m; 12 m3/h → 20,5 m; 13,2 m3/h → 20 m; 15 m3/h → 19 m; 18,9 m3/h → 16 m; 21 m3/h → 15 m; 24 m3/h → 12 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2; Printing page DN2 G2
Dimensions: a 195 mm; b 50 mm; fM 510 mm; g1 12 mm; h1 230 mm; h2 50 mm; h5 330 mm; HD 228 mm; l1 106 mm; l2 99 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 14 mm; w 220 mm
Weight: 37 kg
Materials: bronze impeller CC480K (plated brass P-Cu Zn 40 Pb 2 in the case of BNMP 32/12); shaft AISI 316; bronze CC480K sieve cover; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures

SKU:: 61E00081000
Shipping weight:: 48.10 kg
Item weight:: 37.00 kg

3.694,80 € *

Available

Delivery time: ca. 3 weeks

BNMP 50/12G/A self-priming bronze centrifugal pump with pre-filter

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
bronze version; Pump housing and lantern of bronze CC480K
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer three-phase induction motor
Rated voltage: 230/400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IPX4
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 60 m3/h
Maximum pump head according to the characteristic curve: 12,9 m
Characteristic curve Q/H: 0 m3/h → 12,9 m; 18,9 m3/h → 12 m; 21 m3/h → 12 m; 24 m3/h → 11,5 m; 30 m3/h → 10,5 m; 42 m3/h → 8 m; 48 m3/h → 7 m; 54 m3/h → 5 m; 60 m3/h → 3,5 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2 1/2; Printing page DN2 G2 1/2
Dimensions: a 205 mm; b 50 mm; fM 540 mm; g1 12 mm; h1 262 mm; h2 60 mm; h5 370 mm; HD 240 mm; l1 120 mm; l2 117 mm; m1 100 mm; m2 70 mm; n1 240 mm; n2 190 mm; n3 37 mm; s 14 mm; w 234 mm
Weight: 41,7 kg
Materials: bronze impeller CC480K (plated brass P-Cu Zn 40 Pb 2 in the case of BNMP 32/12); shaft AISI 316; bronze CC480K sieve cover; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
Revision: A

SKU:: 61D0082G200
Shipping weight:: 54.21 kg
Item weight:: 41.70 kg

3.478,26 € *

Available

Delivery time: ca. 3 weeks

BNMP 32/12S/A self-priming bronze centrifugal pump with pre-filter

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
bronze version; Pump housing and lantern of bronze CC480K
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer three-phase induction motor
Rated voltage: 230/400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IPX4
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 24 m3/h
Maximum pump head according to the characteristic curve: 23 m
Characteristic curve Q/H: 0 m3/h → 23 m; 6,6 m3/h → 22,5 m; 9,6 m3/h → 21,5 m; 10,8 m3/h → 21 m; 12 m3/h → 20,5 m; 13,2 m3/h → 20 m; 15 m3/h → 19 m; 18,9 m3/h → 16 m; 21 m3/h → 15 m; 24 m3/h → 12 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2; Printing page DN2 G2
Dimensions: a 195 mm; b 50 mm; fM 510 mm; g1 12 mm; h1 230 mm; h2 50 mm; h5 330 mm; HD 228 mm; l1 106 mm; l2 99 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 14 mm; w 220 mm
Weight: 36,7 kg
Materials: bronze impeller CC480K (plated brass P-Cu Zn 40 Pb 2 in the case of BNMP 32/12); shaft AISI 316; bronze CC480K sieve cover; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
Revision: A

SKU:: 61D00082000
Shipping weight:: 47.71 kg
Item weight:: 36.70 kg

3.169,06 € *

Available

Delivery time: ca. 3 weeks

BA 50-125A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 33 m3/h
Maximum pump head according to the characteristic curve: 20,5 m
Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 35 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F00902000
Shipping weight:: 45.50 kg
Item weight:: 35.00 kg

2.546,14 € *

Available

Delivery time: ca. 3 weeks

BNGM 6/18E self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: up to 6 m3/h
Maximum pump head according to the characteristic curve: 61,8 m
Characteristic curve Q/H: 0 m3/h → 61,8 m; 0,5 m3/h → 59 m; 1 m3/h → 57 m; 1,5 m3/h → 54 m; 2 m3/h → 51 m; 2,5 m3/h → 48 m; 3 m3/h → 45 m; 3,5 m3/h → 43 m; 4 m3/h → 40 m; 4,5 m3/h → 37,5 m; 5 m3/h → 35 m; 5,5 m3/h → 33 m; 6 m3/h → 30 m
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 34 kg
Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal

SKU:: 71B00044100
Shipping weight:: 44.20 kg
Item weight:: 34.00 kg

2.403,72 € *

Available

Delivery time: ca. 3 weeks

BNGM 6/22E self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 9,5 m3/h
Maximum pump head according to the characteristic curve: 48,5 m
Characteristic curve Q/H: 0 m3/h → 48,5 m; 0,5 m3/h → 47 m; 1 m3/h → 45 m; 1,5 m3/h → 43,5 m; 2 m3/h → 42 m; 2,5 m3/h → 41 m; 3 m3/h → 40 m; 3,5 m3/h → 38 m; 4 m3/h → 37 m; 4,5 m3/h → 36 m; 5 m3/h → 35 m; 5,5 m3/h → 33 m; 6 m3/h → 32 m; 6,5 m3/h → 31 m; 7 m3/h → 30 m; 8 m3/h → 27 m; 9 m3/h → 24 m; 9,5 m3/h → 23 m3/h
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 34 kg
Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal

SKU:: 71B00045100
Shipping weight:: 44.20 kg
Item weight:: 34.00 kg

2.403,72 € *

Available

Delivery time: ca. 3 weeks

BNG 6/18/A self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: up to 6 m3/h
Maximum pump head according to the characteristic curve: 67,3 m
Characteristic curve Q/H: 0 m3/h → 67,3 m; 0,5 m3/h → 64,5 m; 1 m3/h → 62 m; 1,5 m3/h → 59 m; 2 m3/h → 56 m; 2,5 m3/h → 54 m; 3 m3/h → 51 m; 3,5 m3/h → 48,5 m; 4 m3/h → 46 m; 4,5 m3/h → 43,5 m; 5 m3/h → 41,5 m; 5,5 m3/h → 39 m; 6 m3/h → 36,5 m
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 33,4 kg
Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
Revision: A

SKU:: 71A00044200
Shipping weight:: 43.42 kg
Item weight:: 33.40 kg

2.247,56 € *

Available

Delivery time: ca. 3 weeks

BNG 6/22/A self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 9,5 m3/h
Maximum pump head according to the characteristic curve: 53 m
Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 51,5 m; 1 m3/h → 50 m; 1,5 m3/h → 48,5 m; 2 m3/h → 47 m; 2,5 m3/h → 46 m; 3 m3/h → 44,5 m; 3,5 m3/h → 43 m; 4 m3/h → 41,5 m; 4,5 m3/h → 40 m; 5 m3/h → 39 m; 5,5 m3/h → 37,5 m; 6 m3/h → 36,5 m; 6,5 m3/h → 35 m; 7 m3/h → 33,5 m; 8 m3/h → 31 m; 9 m3/h → 28,5 m; 9,5 m3/h → 27 m3/h
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 33,4 kg
Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
Revision: A

SKU:: 71A00045200
Shipping weight:: 43.42 kg
Item weight:: 33.40 kg

2.247,56 € *

Available

Delivery time: ca. 3 weeks

A 65-150B/B self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 3 kW / 4 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 54 m3/h
Maximum pump head according to the characteristic curve: 22,8 m
Characteristic curve Q/H: 0 m3/h → 22,8 m; 15 m3/h → 21,5 m; 18 m3/h → 21 m; 24 m3/h → 19,5 m; 30 m3/h → 17,5 m; 33 m3/h → 16,5 m; 36 m3/h → 15,5 m; 42 m3/h → 12,5 m; 48 m3/h → 9,5 m; 54 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
Article weight: 52 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 60F01583000
Shipping weight:: 67.60 kg
Item weight:: 52.00 kg

1.798,38 € *

Available

Delivery time: ca. 3 weeks

NMP 50/12D/A self-priming centrifugal pump with pre-filter

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
cast iron design; Pump housing and lantern made of GJL 200 with cataphoresis coating
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer three-phase induction motor
Rated voltage: 230/400 V ±10 %, 50 Hz
Engine rated power P2: 3 kW / 4 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IPX4
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 66 m3/h
Maximum pump head according to the characteristic curve: 19 m
Characteristic curve Q/H: 0 m3/h → 19 m; 18,9 m3/h → 18 m; 21 m3/h → 18 m; 24 m3/h → 17,5 m; 30 m3/h → 16,5 m; 42 m3/h → 15 m; 48 m3/h → 13 m; 54 m3/h → 11,5 m; 60 m3/h → 9,5 m; 66 m3/h → 7 m
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2 1/2; Printing page DN2 G2 1/2
Dimensions: a 205 mm; b 50 mm; fM 602 mm; g1 12 mm; h1 262 mm; h2 60 mm; h5 370 mm; HD 250 mm; l1 120 mm; l2 117 mm; m1 100 mm; m2 70 mm; n1 240 mm; n2 190 mm; n3 20 mm; s 14 mm; w 298 mm
Weight: 47,7 kg
Materials: impeller GJL 200 (plated brass P-Cu Zn 40 Pb 2 in the case of NMP 32/12); shaft AISI 303; sieve cover GJL 200; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
Revision: A

SKU:: 60D00862000
Shipping weight:: 62.01 kg
Item weight:: 47.70 kg

1.481,09 € *

Available

Delivery time: ca. 3 weeks

NMPM 50/12GE self-priming centrifugal pump with pre-filter, 230 V

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
cast iron design; Pump housing and lantern made of GJL 200 with cataphoresis coating
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IPX4
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 60 m3/h
Maximum pump head according to the characteristic curve: 12,9 m
Characteristic curve Q/H: 0 m3/h → 12,9 m; 18,9 m3/h → 12 m; 21 m3/h → 12 m; 24 m3/h → 11,5 m; 30 m3/h → 10,5 m; 42 m3/h → 8 m; 48 m3/h → 7 m; 54 m3/h → 5 m; 60 m3/h → 3,5 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2 1/2; Printing page DN2 G2 1/2
Dimensions: a 205 mm; b 50 mm; fM 540 mm; g1 12 mm; h1 262 mm; h2 60 mm; h5 370 mm; HD 240 mm; l1 120 mm; l2 117 mm; m1 100 mm; m2 70 mm; n1 240 mm; n2 190 mm; n3 37 mm; s 14 mm; w 234 mm
Weight: 37,7 kg
Materials: impeller GJL 200 (plated brass P-Cu Zn 40 Pb 2 in the case of NMP 32/12); shaft AISI 303; sieve cover GJL 200; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures

SKU:: 60E0082G100
Shipping weight:: 49.01 kg
Item weight:: 37.70 kg

1.376,78 € *

Available

Delivery time: ca. 3 weeks

NMPM 32/12SE self-priming centrifugal pump with pre-filter, 230 V

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
cast iron design; Pump housing and lantern made of GJL 200 with cataphoresis coating
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IPX4
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 24 m3/h
Maximum pump head according to the characteristic curve: 23 m
Characteristic curve Q/H: 0 m3/h → 23 m; 6,6 m3/h → 22,5 m; 9,6 m3/h → 21,5 m; 10,8 m3/h → 21 m; 12 m3/h → 20,5 m; 13,2 m3/h → 20 m; 15 m3/h → 19 m; 18,9 m3/h → 16 m; 21 m3/h → 15 m; 24 m3/h → 12 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2; Printing page DN2 G2
Dimensions: a 195 mm; b 50 mm; fM 510 mm; g1 12 mm; h1 230 mm; h2 50 mm; h5 330 mm; HD 228 mm; l1 106 mm; l2 99 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 14 mm; w 220 mm
Weight: 33,8 kg
Materials: impeller GJL 200 (plated brass P-Cu Zn 40 Pb 2 in the case of NMP 32/12); shaft AISI 303; sieve cover GJL 200; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures

SKU:: 60E00081000
Shipping weight:: 43.94 kg
Item weight:: 33.80 kg

1.310,92 € *

Available

Delivery time: ca. 3 weeks

AM 50-125AE self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2,1 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 33 m3/h
Maximum pump head according to the characteristic curve: 20,5 m
Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 29,9 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 60G00901000
Shipping weight:: 38.87 kg
Item weight:: 29.90 kg

1.243,40 € *

Available

Delivery time: ca. 3 weeks

NMP 50/12G/A self-priming centrifugal pump with pre-filter

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
cast iron design; Pump housing and lantern made of GJL 200 with cataphoresis coating
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer three-phase induction motor
Rated voltage: 230/400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IPX4
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 60 m3/h
Maximum pump head according to the characteristic curve: 12,9 m
Characteristic curve Q/H: 0 m3/h → 12,9 m; 18,9 m3/h → 12 m; 21 m3/h → 12 m; 24 m3/h → 11,5 m; 30 m3/h → 10,5 m; 42 m3/h → 8 m; 48 m3/h → 7 m; 54 m3/h → 5 m; 60 m3/h → 3,5 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2 1/2; Printing page DN2 G2 1/2
Dimensions: a 205 mm; b 50 mm; fM 540 mm; g1 12 mm; h1 262 mm; h2 60 mm; h5 370 mm; HD 240 mm; l1 120 mm; l2 117 mm; m1 100 mm; m2 70 mm; n1 240 mm; n2 190 mm; n3 37 mm; s 14 mm; w 234 mm
Weight: 37,3 kg
Materials: impeller GJL 200 (plated brass P-Cu Zn 40 Pb 2 in the case of NMP 32/12); shaft AISI 303; sieve cover GJL 200; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
Revision: A

SKU:: 60D0082G200
Shipping weight:: 48.49 kg
Item weight:: 37.30 kg

1.203,56 € *

Available

Delivery time: ca. 3 weeks

NMP 32/12S/A self-priming centrifugal pump with pre-filter

Monoblock self-priming centrifugal pump with integrated pre-filter; Sieve basket with Ø 3 mm perforations
cast iron design; Pump housing and lantern made of GJL 200 with cataphoresis coating
water circulation in swimming pool filtration systems; For clean or slightly polluted water containing suspended solids
2-poleer three-phase induction motor
Rated voltage: 230/400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IPX4
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 24 m3/h
Maximum pump head according to the characteristic curve: 23 m
Characteristic curve Q/H: 0 m3/h → 23 m; 6,6 m3/h → 22,5 m; 9,6 m3/h → 21,5 m; 10,8 m3/h → 21 m; 12 m3/h → 20,5 m; 13,2 m3/h → 20 m; 15 m3/h → 19 m; 18,9 m3/h → 16 m; 21 m3/h → 15 m; 24 m3/h → 12 m3/h
Maximum water temperature: 60 °C
Maximum ambient temperature: 40 °C
Total suction height: to 7 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G2; Printing page DN2 G2
Dimensions: a 195 mm; b 50 mm; fM 510 mm; g1 12 mm; h1 230 mm; h2 50 mm; h5 330 mm; HD 228 mm; l1 106 mm; l2 99 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 14 mm; w 220 mm
Weight: 32 kg
Materials: impeller GJL 200 (plated brass P-Cu Zn 40 Pb 2 in the case of NMP 32/12); shaft AISI 303; sieve cover GJL 200; filter AISI 304; Slip ring seal carbon/ceramic/FPM
Design according to: EN 60034-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Degree of protection IP55; Special sliding ring seal; Higher liquid or ambient temperatures
Revision: A

SKU:: 60D00082000
Shipping weight:: 41.60 kg
Item weight:: 32.00 kg

1.149,88 € *

Available

Delivery time: ca. 3 weeks

A 50-125A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 33 m3/h
Maximum pump head according to the characteristic curve: 20,5 m
Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 29,8 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60F00902000
Shipping weight:: 38.74 kg
Item weight:: 29.80 kg

1.132,91 € *

Available

Delivery time: ca. 3 weeks

NGM 6/18E self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: up to 6 m3/h
Maximum pump head according to the characteristic curve: 61,8 m
Characteristic curve Q/H: 0 m3/h → 61,8 m; 0,5 m3/h → 59 m; 1 m3/h → 57 m; 1,5 m3/h → 54 m; 2 m3/h → 51 m; 2,5 m3/h → 48 m; 3 m3/h → 45 m; 3,5 m3/h → 43 m; 4 m3/h → 40 m; 4,5 m3/h → 37,5 m; 5 m3/h → 35 m; 5,5 m3/h → 33 m; 6 m3/h → 30 m
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 29,6 kg
Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal

SKU:: 70B00044100
Shipping weight:: 38.48 kg
Item weight:: 29.60 kg

1.093,07 € *

Available

Delivery time: ca. 3 weeks

NGM 6/22E self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 9,5 m3/h
Maximum pump head according to the characteristic curve: 48,5 m
Characteristic curve Q/H: 0 m3/h → 48,5 m; 0,5 m3/h → 47 m; 1 m3/h → 45 m; 1,5 m3/h → 43,5 m; 2 m3/h → 42 m; 2,5 m3/h → 41 m; 3 m3/h → 40 m; 3,5 m3/h → 38 m; 4 m3/h → 37 m; 4,5 m3/h → 36 m; 5 m3/h → 35 m; 5,5 m3/h → 33 m; 6 m3/h → 32 m; 6,5 m3/h → 31 m; 7 m3/h → 30 m; 8 m3/h → 27 m; 9 m3/h → 24 m; 9,5 m3/h → 23 m3/h
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 29,6 kg
Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal

SKU:: 70B00045100
Shipping weight:: 38.48 kg
Item weight:: 29.60 kg

1.093,07 € *

Available

Delivery time: ca. 3 weeks

NG 6/18/A self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: up to 6 m3/h
Maximum pump head according to the characteristic curve: 67,3 m
Characteristic curve Q/H: 0 m3/h → 67,3 m; 0,5 m3/h → 64,5 m; 1 m3/h → 62 m; 1,5 m3/h → 59 m; 2 m3/h → 56 m; 2,5 m3/h → 54 m; 3 m3/h → 51 m; 3,5 m3/h → 48,5 m; 4 m3/h → 46 m; 4,5 m3/h → 43,5 m; 5 m3/h → 41,5 m; 5,5 m3/h → 39 m; 6 m3/h → 36,5 m
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 29,7 kg
Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
Revision: A

SKU:: 70A00044200
Shipping weight:: 38.61 kg
Item weight:: 29.70 kg

939,95 € *

Available

Delivery time: ca. 3 weeks

NG 6/22/A self-priming jet pump with built-in ejector

Construction: Self-priming flat well jet pump in block construction with built-in ejector
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 9,5 m3/h
Maximum pump head according to the characteristic curve: 53 m
Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 51,5 m; 1 m3/h → 50 m; 1,5 m3/h → 48,5 m; 2 m3/h → 47 m; 2,5 m3/h → 46 m; 3 m3/h → 44,5 m; 3,5 m3/h → 43 m; 4 m3/h → 41,5 m; 4,5 m3/h → 40 m; 5 m3/h → 39 m; 5,5 m3/h → 37,5 m; 6 m3/h → 36,5 m; 6,5 m3/h → 35 m; 7 m3/h → 33,5 m; 8 m3/h → 31 m; 9 m3/h → 28,5 m; 9,5 m3/h → 27 m3/h
Media temperature: to +40 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
Article weight: 29,7 kg
Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
Revision: A

SKU:: 70A00045200
Shipping weight:: 38.61 kg
Item weight:: 29.70 kg

939,95 € *

Available

Delivery time: ca. 3 weeks

NGX 6/18/A self-priming stainless steel jet pump

Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
Design: Stainless steel design with pump housing and housing cover from AISI 304
Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2800 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: up to 6 m3/h
Maximum pump head according to the characteristic curve: 58 m
Characteristic curve Q/H: 0 m3/h → 58 m; 0,5 m3/h → 54,7 m; 1 m3/h → 51,5 m; 2 m3/h → 46 m; 2,4 m3/h → 44 m; 3 m3/h → 41,3 m; 3,2 m3/h → 40,4 m; 3,6 m3/h → 38,7 m; 4 m3/h → 37 m; 4,5 m3/h → 34,7 m; 5 m3/h → 32,5 m; 5,5 m3/h → 30,5 m; 6 m3/h → 28,5 m
Media temperature: 0 to +35 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 8 bar
Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
Article weight: 18,1 kg
Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Brass runner
Revision: A

SKU:: 72A50044200
Shipping weight:: 23.53 kg
Item weight:: 18.10 kg

765,60 € *

Available

Delivery time: ca. 3 weeks

NGX 6/22/A self-priming stainless steel jet pump

Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
Design: Stainless steel design with pump housing and housing cover from AISI 304
Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2800 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 8,4 m3/h
Maximum pump head according to the characteristic curve: 46,5 m
Characteristic curve Q/H: 0 m3/h → 46,5 m; 0,5 m3/h → 45 m; 1 m3/h → 43,5 m; 2 m3/h → 40,5 m; 2,4 m3/h → 39,3 m; 3 m3/h → 37,5 m; 3,2 m3/h → 37 m; 3,6 m3/h → 36 m; 4 m3/h → 35 m; 4,5 m3/h → 33,5 m; 5 m3/h → 32,5 m; 5,5 m3/h → 31,2 m; 6 m3/h → 30 m; 6,5 m3/h → 28,5 m; 7 m3/h → 27,5 m; 8 m3/h → 25,5 m; 8,4 m3/h → 24,5 m3/h
Media temperature: 0 to +35 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 8 bar
Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
Article weight: 17,3 kg
Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Brass runner
Revision: A

SKU:: 72A50045200
Shipping weight:: 22.49 kg
Item weight:: 17.30 kg

765,60 € *

Available

Delivery time: ca. 3 weeks

NGXM 6/18 self-priming stainless steel jet pump

Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
Design: Stainless steel design with pump housing and housing cover from AISI 304
Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2800 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: up to 6 m3/h
Maximum pump head according to the characteristic curve: 58 m
Characteristic curve Q/H: 0 m3/h → 58 m; 0,5 m3/h → 54,7 m; 1 m3/h → 51,5 m; 2 m3/h → 46 m; 2,4 m3/h → 44 m; 3 m3/h → 41,3 m; 3,2 m3/h → 40,4 m; 3,6 m3/h → 38,7 m; 4 m3/h → 37 m; 4,5 m3/h → 34,7 m; 5 m3/h → 32,5 m; 5,5 m3/h → 30,5 m; 6 m3/h → 28,5 m
Media temperature: 0 to +35 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 8 bar
Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
Article weight: 17,4 kg
Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Brass runner

SKU:: 72B50044100
Shipping weight:: 22.62 kg
Item weight:: 17.40 kg

765,60 € *

Available

Delivery time: ca. 3 weeks

NGXM 6/22 self-priming stainless steel jet pump

Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
Design: Stainless steel design with pump housing and housing cover from AISI 304
Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2 kW
Rated current: 9,2 A at 230 V
Rated speed: 2800 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 8,4 m3/h
Maximum pump head according to the characteristic curve: 46,5 m
Characteristic curve Q/H: 0 m3/h → 46,5 m; 0,5 m3/h → 45 m; 1 m3/h → 43,5 m; 2 m3/h → 40,5 m; 2,4 m3/h → 39,3 m; 3 m3/h → 37,5 m; 3,2 m3/h → 37 m; 3,6 m3/h → 36 m; 4 m3/h → 35 m; 4,5 m3/h → 33,5 m; 5 m3/h → 32,5 m; 5,5 m3/h → 31,2 m; 6 m3/h → 30 m; 6,5 m3/h → 28,5 m; 7 m3/h → 27,5 m; 8 m3/h → 25,5 m; 8,4 m3/h → 24,5 m3/h
Media temperature: 0 to +35 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 8 bar
Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
Dimensions: a 140 mm; b 33 mm; fM 488.5 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 240 mm; l5 213.5 mm; m1 37.5 mm; m2 28 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 113 mm; w1 157.5 mm
Article weight: 17,4 kg
Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Brass runner

SKU:: 72B50045100
Shipping weight:: 22.62 kg
Item weight:: 17.40 kg

765,60 € *

Available

Delivery time: ca. 3 weeks

Items 1 - 27 of 27