Calpeda
Items 1 - 2 of 2
- Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 0,55 kW / 0,75 HP
- Rated current: 2,8 A at 230 V / 1,6 A at 400 V
- Rated speed: 2900 min-1
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 18 m3/h
- Maximum pump head according to the characteristic curve: 14,4 m
- Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
- Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
- Article weight: 21,6 kg
- Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Revision: A
- Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 0,55 kW / 0,75 HP
- Rated current: 2,8 A at 230 V / 1,6 A at 400 V
- Rated speed: 2900 min-1
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 18 m3/h
- Maximum pump head according to the characteristic curve: 14,4 m
- Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
- Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
- Article weight: 19,5 kg
- Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Revision: A
Items 1 - 2 of 2