AUCOM

Contact protection 835-1250A CSX

SKU:: AR23972
Shipping weight:: 0.20 kg
Item weight:: 0.20 kg

189,00 € *

Available

Delivery time: ca. 3 months

CSXi soft-starter

incl. soft stop, current ramp or constant current control, motor overload, phase failure, phase sequence and anti-symmetry protection

Mains voltage	V4 = 3x 200 to 440 VAC (+ 10 % / - 15 %); V6 = 3x 200 to 575 VAC (+ 10 % / - 15 %)
Drive voltage	C1: 110 to 240 VAC (+10 % / -15 %) or: 380 to 440 VAC (+10 % / -15 %)
	C2: 24 VAC/VDC (± 20%)
Network frequency	45 Hz – 60 Hz
Designation of the structure	Semiconductor motor starter with internal bypass - Form 1, - with motor protection - 2-phase controlled - with current measurement and regulation. Softstart and softstop - Motor protection functions: Engine overload, phase failure and start time monitoring. - up to 30 kW installation on a DIN rail or space-saving horizontal
Inputs	Start [01 terminal]: Normally open 150 kΩ for 300 VAC and 5,6 kΩ for 24 VAC/VDC
	Stop [02 terminal]: Normally closed 150 kΩ for 300 VAC and 5,6 kΩ for 24 VAC/VDC
Outputs	Relay main contactor [13,14 terminal]: Normally open 6 A, 30 VDC / 6 A, 250 VAC, resistive
	Programmable relay [terminal 23, 24]: Normally open 6 A, 30 VDC / 6 A, 250 VAC, resistive
Protection type	Sizes 1 & 2 IP20, Size 3 IP00
Operating temperature	-10 °C to +60 °C
Storage temperature	-25 °C to +60 °C (up to +70 °C for max. 24 hours)
Moisture	5 % to 95 % relative humidity
Degree of pollution	Degree of pollution 3
Vibration test	according to IEC 60068 - Fc sinusoidal
	4 Hz to 13,2 Hz: ± 1 mm amplitude; 13,2 Hz to 200 Hz: ± 0,7 g
EMV emission	Radio interference suppression (EMV) Class B
EMV security	IEC 61000-2-4 (Class 3), EN / IEC 61800-3
Heat release	During take-off: 3,0 Watts / Amperes
	During operation: 10 Watt (typical)
Accessories (optional)	Remote control, PC software
Communication options	DeviceNet, Modbus, Profibus, Profinet, Ethernet/IP, Modbus TC/IP,
Certificates	CCC: GB 14048.6; CE: EN 60947-4-2; UL / C-UL: UL 508; EAC: TP TC 004/2011, TP TC 020/2011; Marine: Lloyds Marine No 1 Specification; RCM: IEC 60947-4-2

SKU:

AR23605

Variations in:

Engine power | Electricity
Mains voltage
Drive voltage

Shipping weight:

2.40 kg

Item weight:

2.40 kg

from

374,00 € *

Available

Go to item

EMX4i soft-sweet runner

The EMX4i softstarter sets new standards in softstarter technology. It is small and powerful with new integrated functions. Protection level up to 22 kW IP20, from 30 kW IP00 Operating temperature -10 °C to +60 °C, above 40 °C with lower nominal values EMV emission IEC 60947-4-2 Class B • understandable comprehensive plaintext control panel • Plenty of feedback • Real-time graphs • USB cut-off • Compatible with IE3 engines • Electrical efficiency > 99 % • Integrated bypass • No harmonics • inside delta connection is possible • Simulation mode • Clock + weekly calendar • Digital inputs: 2 x fixed, 2 x programmable • Analogue output: 1 x programmable • Relay outputs: 1 x fixed, 2 x programmable • Calendar-controlled start/stop • Application-adaptive ramps • Electrical ramps • Ramps with constant current • Kickstart • Pump cleaning run • Time-controlled ramps • Freewheeling ramp • DC brakes • Soft braking • Reversal of direction of rotation Adaptable protective functions • Engine overload • Recognition of a too long starting process • Undercurrent/overcurrent detection • Low voltage/overvoltage detection • Detection of current balance deviations • Emergency stop entrance • PTC input Power-Through bridges defective thyristor • FIRE Emergency Operation Accessories optional • Profinet, Ethernet/IP, Modbus TCP • Modbus RTU, Profibus, DeviceNet • Customer-specific smart card • Remote control • Finger protection Certificates CCC: GB 14048.6; CE: EN 60947-4-2; C-UL: C22.2 N° 60947-4-2; UL: UL 60947-4-2; Marine: Lloyds Marine No 1 Specification; ABS Steel Vessels Rules 2010; RCM: IEC 60947-4-2

SKU:

AR24149

Variations in: