Skip to main content Skip to search Skip to navigation

Self-priming pumps

This category includes Calpeda self-priming pumps for water supply, well water extraction, pressure boosting, irrigation, drainage and a wide range of domestic, commercial and industrial applications.

The range covers different pump technologies – from self-priming jet pumps and liquid ring pumps to centrifugal pumps with open impellers and horizontal multistage self-priming centrifugal pumps. This allows different requirements for flow rate, head, pumped liquid, materials and supply voltage to be matched to the application.

  • Self-priming pumps for wells, water supply and pressure boosting
  • Jet pumps with built-in ejector
  • Multistage self-priming centrifugal pumps for higher delivery heads
  • Liquid ring pumps for applications involving air or gas in the pumped liquid
  • Open-impeller centrifugal pumps for clean or slightly dirty water
  • Cast-iron, bronze and stainless-steel versions
  • Single-phase and three-phase motor versions available

This category includes the Calpeda A, CA, MXA, NG, NGL and NGX series. When selecting the appropriate pump, the required flow rate, delivery head, suction lift, pumped liquid, material, connection size and supply voltage should be considered.

Standard Item name from A to Z Item name from Z to A Price in ascending order Price in descending order Weight SKU Release date Newest first GTIN Bestsellers
10 20 30 40 50
Items 1 - 40 of 60
Motor type: Three-phase motor Self-priming: Yes Reset all filters
A 40-110A/B self-priming centrifugal pump with open impeller
A 40-110A/B self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 18 m3/h
  • Maximum pump head according to the characteristic curve: 17,2 m
  • Characteristic curve Q/H: 0 m3/h → 17,2 m; 3,6 m3/h → 15,4 m; 4,8 m3/h → 14,9 m; 6 m3/h → 14,2 m; 7,5 m3/h → 13,3 m; 8,4 m3/h → 12,9 m; 9,6 m3/h → 12,1 m; 10,8 m3/h → 11,3 m; 12 m3/h → 10,5 m; 15 m3/h → 8,4 m; 18 m3/h → 5,6 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
  • Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
  • Article weight: 20,7 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
60F00382000
Shipping weight:
26.91 kg
Item weight:
20.70 kg
841,20 € *
Available
Delivery time: ca. 3 weeks
A 40-110B/A self-priming centrifugal pump with open impeller
A 40-110B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2900 min-1
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 18 m3/h
  • Maximum pump head according to the characteristic curve: 14,4 m
  • Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
  • Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
  • Article weight: 19,5 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
60F00341000
Shipping weight:
25.35 kg
Item weight:
19.50 kg
770,65 € *
Available
Delivery time: ca. 3 weeks
A 50-125A/A self-priming centrifugal pump with open impeller
A 50-125A/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 33 m3/h
  • Maximum pump head according to the characteristic curve: 20,5 m
  • Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
  • Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
  • Article weight: 29,8 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
60F00902000
Shipping weight:
38.74 kg
Item weight:
29.80 kg
1.132,91 € *
Available
Delivery time: ca. 3 weeks
A 50-125B/A self-priming centrifugal pump with open impeller
A 50-125B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 30 m3/h
  • Maximum pump head according to the characteristic curve: 16,5 m
  • Characteristic curve Q/H: 0 m3/h → 16,5 m; 6 m3/h → 15,5 m; 9 m3/h → 14,9 m; 12 m3/h → 14,2 m; 15 m3/h → 12,9 m; 18 m3/h → 11,6 m; 21 m3/h → 10 m; 24 m3/h → 8,3 m; 27 m3/h → 6,2 m; 30 m3/h → 4 m
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
  • Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
  • Article weight: 28,3 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
60F00862000
Shipping weight:
36.79 kg
Item weight:
28.30 kg
1.088,46 € *
Available
Delivery time: ca. 3 weeks
A 50-125CE self-priming centrifugal pump with open impeller
A 50-125CE self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 4 A at 230 V / 2,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 27 m3/h
  • Maximum pump head according to the characteristic curve: 13,7 m
  • Characteristic curve Q/H: 0 m3/h → 13,7 m; 6 m3/h → 12,8 m; 9 m3/h → 12,2 m; 12 m3/h → 11,3 m; 15 m3/h → 10 m; 18 m3/h → 8,5 m; 21 m3/h → 7 m; 24 m3/h → 5,3 m; 27 m3/h → 3,3 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
  • Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
  • Article weight: 26,2 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
60F00821000
Shipping weight:
34.06 kg
Item weight:
26.20 kg
1.067,06 € *
Available
Delivery time: ca. 3 weeks
A 65-150A/C self-priming centrifugal pump with open impeller
A 65-150A/C self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 400 V / 690 V ±10 %, 50 Hz
  • Engine rated power P2: 4 kW / 5,5 HP
  • Rated current: 9,6 A at 400 V / 5,5 A at 690 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 57 m3/h
  • Maximum pump head according to the characteristic curve: 30,8 m
  • Characteristic curve Q/H: 0 m3/h → 30,8 m; 15 m3/h → 29 m; 18 m3/h → 28 m; 24 m3/h → 27 m; 30 m3/h → 25,5 m; 33 m3/h → 24,5 m; 36 m3/h → 23,5 m; 42 m3/h → 21 m; 48 m3/h → 18 m; 54 m3/h → 14 m; 57 m3/h → 11 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
  • Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
  • Article weight: 55,3 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: C
SKU:
60F01644000
Shipping weight:
71.89 kg
Item weight:
55.30 kg
1.844,49 € *
Available
Delivery time: ca. 3 weeks
A 65-150B/B self-priming centrifugal pump with open impeller
A 65-150B/B self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 3 kW / 4 HP
  • Rated current: 11,5 A at 230 V / 6,6 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 54 m3/h
  • Maximum pump head according to the characteristic curve: 22,8 m
  • Characteristic curve Q/H: 0 m3/h → 22,8 m; 15 m3/h → 21,5 m; 18 m3/h → 21 m; 24 m3/h → 19,5 m; 30 m3/h → 17,5 m; 33 m3/h → 16,5 m; 36 m3/h → 15,5 m; 42 m3/h → 12,5 m; 48 m3/h → 9,5 m; 54 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
  • Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
  • Article weight: 52 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
60F01583000
Shipping weight:
67.60 kg
Item weight:
52.00 kg
1.798,38 € *
Available
Delivery time: ca. 3 weeks
A 80-170A/A self-priming centrifugal pump with open impeller
A 80-170A/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 400 V / 690 V ±10 %, 50 Hz
  • Engine rated power P2: 7,5 kW / 10 HP
  • Rated current: 14,3 A at 400 V / 8,3 A at 690 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 66 m3/h
  • Maximum pump head according to the characteristic curve: 35 m
  • Characteristic curve Q/H: 0 m3/h → 35 m; 15 m3/h → 33,6 m; 18 m3/h → 33,2 m; 21 m3/h → 32,9 m; 24 m3/h → 32,5 m; 30 m3/h → 31,6 m; 36 m3/h → 30,5 m; 45 m3/h → 28,1 m; 54 m3/h → 25,3 m; 60 m3/h → 23,2 m; 66 m3/h → 20,4 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
  • Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
  • Article weight: 86,1 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
60F02042000
Shipping weight:
111.93 kg
Item weight:
86.10 kg
2.831,76 € *
Available
Delivery time: ca. 3 weeks
A 80-170B/A self-priming centrifugal pump with open impeller
A 80-170B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 400 V / 690 V ±10 %, 50 Hz
  • Engine rated power P2: 5,5 kW / 7,5 HP
  • Rated current: 10,8 A at 400 V / 6,2 A at 690 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 66 m3/h
  • Maximum pump head according to the characteristic curve: 28 m
  • Characteristic curve Q/H: 0 m3/h → 28 m; 15 m3/h → 27,3 m; 18 m3/h → 27,3 m; 21 m3/h → 27 m; 24 m3/h → 26,8 m; 30 m3/h → 25,7 m; 36 m3/h → 24,4 m; 45 m3/h → 22,1 m; 54 m3/h → 19 m; 60 m3/h → 16,7 m; 66 m3/h → 13,7 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
  • Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
  • Article weight: 80,5 kg
  • Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
60F02022000
Shipping weight:
104.65 kg
Item weight:
80.50 kg
2.662,37 € *
Available
Delivery time: ca. 3 weeks
BA 40-110A/B self-priming centrifugal pump with open...
BA 40-110A/B self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 18 m3/h
  • Maximum pump head according to the characteristic curve: 17,2 m
  • Characteristic curve Q/H: 0 m3/h → 17,2 m; 3,6 m3/h → 15,4 m; 4,8 m3/h → 14,9 m; 6 m3/h → 14,2 m; 7,5 m3/h → 13,3 m; 8,4 m3/h → 12,9 m; 9,6 m3/h → 12,1 m; 10,8 m3/h → 11,3 m; 12 m3/h → 10,5 m; 15 m3/h → 8,4 m; 18 m3/h → 5,6 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
  • Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
  • Article weight: 23,3 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
61F00382000
Shipping weight:
30.29 kg
Item weight:
23.30 kg
2.160,73 € *
Available
Delivery time: ca. 3 weeks
BA 40-110B/A self-priming centrifugal pump with open...
BA 40-110B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2900 min-1
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 18 m3/h
  • Maximum pump head according to the characteristic curve: 14,4 m
  • Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
  • Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
  • Article weight: 21,6 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
61F00341000
Shipping weight:
28.08 kg
Item weight:
21.60 kg
2.088,87 € *
Available
Delivery time: ca. 3 weeks
BA 50-125A/A self-priming centrifugal pump with open...
BA 50-125A/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 33 m3/h
  • Maximum pump head according to the characteristic curve: 20,5 m
  • Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
  • Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
  • Article weight: 35 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
61F00902000
Shipping weight:
45.50 kg
Item weight:
35.00 kg
2.546,14 € *
Available
Delivery time: ca. 3 weeks
BA 50-125B/A self-priming centrifugal pump with open...
BA 50-125B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 30 m3/h
  • Maximum pump head according to the characteristic curve: 16,5 m
  • Characteristic curve Q/H: 0 m3/h → 16,5 m; 6 m3/h → 15,5 m; 9 m3/h → 14,9 m; 12 m3/h → 14,2 m; 15 m3/h → 12,9 m; 18 m3/h → 11,6 m; 21 m3/h → 10 m; 24 m3/h → 8,3 m; 27 m3/h → 6,2 m; 30 m3/h → 4 m
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
  • Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
  • Article weight: 32,7 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
61F00862000
Shipping weight:
42.51 kg
Item weight:
32.70 kg
2.474,19 € *
Available
Delivery time: ca. 3 weeks
BA 50-125CE self-priming centrifugal pump with open impeller
BA 50-125CE self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 4 A at 230 V / 2,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 27 m3/h
  • Maximum pump head according to the characteristic curve: 13,7 m
  • Characteristic curve Q/H: 0 m3/h → 13,7 m; 6 m3/h → 12,8 m; 9 m3/h → 12,2 m; 12 m3/h → 11,3 m; 15 m3/h → 10 m; 18 m3/h → 8,5 m; 21 m3/h → 7 m; 24 m3/h → 5,3 m; 27 m3/h → 3,3 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
  • Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
  • Article weight: 31,2 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
61F00821000
Shipping weight:
40.56 kg
Item weight:
31.20 kg
2.436,61 € *
Available
Delivery time: ca. 3 weeks
BA 65-150A/B self-priming centrifugal pump with open...
BA 65-150A/B self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 400 V / 690 V ±10 %, 50 Hz
  • Engine rated power P2: 4 kW / 5,5 HP
  • Rated current: 9,6 A at 400 V / 5,5 A at 690 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 57 m3/h
  • Maximum pump head according to the characteristic curve: 30,8 m
  • Characteristic curve Q/H: 0 m3/h → 30,8 m; 15 m3/h → 29 m; 18 m3/h → 28 m; 24 m3/h → 27 m; 30 m3/h → 25,5 m; 33 m3/h → 24,5 m; 36 m3/h → 23,5 m; 42 m3/h → 21 m; 48 m3/h → 18 m; 54 m3/h → 14 m; 57 m3/h → 11 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
  • Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
  • Article weight: 63,2 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
61F01643000
Shipping weight:
82.16 kg
Item weight:
63.20 kg
4.110,58 € *
Available
Delivery time: ca. 3 weeks
BA 65-150B/A self-priming centrifugal pump with open...
BA 65-150B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 3 kW / 4 HP
  • Rated current: 11,5 A at 230 V / 6,6 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 54 m3/h
  • Maximum pump head according to the characteristic curve: 22,8 m
  • Characteristic curve Q/H: 0 m3/h → 22,8 m; 15 m3/h → 21,5 m; 18 m3/h → 21 m; 24 m3/h → 19,5 m; 30 m3/h → 17,5 m; 33 m3/h → 16,5 m; 36 m3/h → 15,5 m; 42 m3/h → 12,5 m; 48 m3/h → 9,5 m; 54 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
  • Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
  • Article weight: 58,6 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
61F01582000
Shipping weight:
76.18 kg
Item weight:
58.60 kg
4.063,60 € *
Available
Delivery time: ca. 3 weeks
BA 65-150C/B self-priming centrifugal pump with open...
BA 65-150C/B self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 11,5 A at 230 V / 6,6 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 48 m3/h
  • Maximum pump head according to the characteristic curve: 18,8 m
  • Characteristic curve Q/H: 0 m3/h → 18,8 m; 15 m3/h → 17,5 m; 18 m3/h → 17 m; 24 m3/h → 16 m; 30 m3/h → 14 m; 33 m3/h → 13 m; 36 m3/h → 11,5 m; 42 m3/h → 9 m; 48 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
  • Dimensions: a 172 mm; b 50 mm; fM 583 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 260 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 319 mm
  • Article weight: 52,5 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
61F01542000
Shipping weight:
68.25 kg
Item weight:
52.50 kg
3.907,26 € *
Available
Delivery time: ca. 3 weeks
BA 80-170A/A self-priming centrifugal pump with open...
BA 80-170A/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 400 V / 690 V ±10 %, 50 Hz
  • Engine rated power P2: 7,5 kW / 10 HP
  • Rated current: 14,3 A at 400 V / 8,3 A at 690 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 66 m3/h
  • Maximum pump head according to the characteristic curve: 35 m
  • Characteristic curve Q/H: 0 m3/h → 35 m; 15 m3/h → 33,6 m; 18 m3/h → 33,2 m; 21 m3/h → 32,9 m; 24 m3/h → 32,5 m; 30 m3/h → 31,6 m; 36 m3/h → 30,5 m; 45 m3/h → 28,1 m; 54 m3/h → 25,3 m; 60 m3/h → 23,2 m; 66 m3/h → 20,4 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
  • Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
  • Article weight: 95,1 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
61F02042000
Shipping weight:
123.63 kg
Item weight:
95.10 kg
7.525,33 € *
Available
Delivery time: ca. 3 weeks
BA 80-170B/A self-priming centrifugal pump with open...
BA 80-170B/A self-priming centrifugal pump with open impeller
  • Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 400 V / 690 V ±10 %, 50 Hz
  • Engine rated power P2: 5,5 kW / 7,5 HP
  • Rated current: 10,8 A at 400 V / 6,2 A at 690 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 66 m3/h
  • Maximum pump head according to the characteristic curve: 28 m
  • Characteristic curve Q/H: 0 m3/h → 28 m; 15 m3/h → 27,3 m; 18 m3/h → 27,3 m; 21 m3/h → 27 m; 24 m3/h → 26,8 m; 30 m3/h → 25,7 m; 36 m3/h → 24,4 m; 45 m3/h → 22,1 m; 54 m3/h → 19 m; 60 m3/h → 16,7 m; 66 m3/h → 13,7 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
  • Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
  • Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
  • Article weight: 89,9 kg
  • Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
61F02022000
Shipping weight:
116.87 kg
Item weight:
89.90 kg
7.303,39 € *
Available
Delivery time: ca. 3 weeks
BCA 60E self-priming liquid ring pump
BCA 60E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,15 kW / 0,2 HP
  • Rated current: 1,7 A at 230 V / 1 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 0,75 m3/h
  • Maximum pump head according to the characteristic curve: 21,2 m
  • Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
  • Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
  • Article weight: 6,2 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
71820011000
Shipping weight:
8.06 kg
Item weight:
6.20 kg
741,85 € *
Available
Delivery time: ca. 3 weeks
BCA 80/A self-priming liquid ring pump
BCA 80/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,45 kW / 0,6 HP
  • Rated current: 2,3 A at 230 V / 1,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 1,89 m3/h
  • Maximum pump head according to the characteristic curve: 38 m
  • Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
  • Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
  • Article weight: 9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71810020000
Shipping weight:
11.70 kg
Item weight:
9.00 kg
847,38 € *
Available
Delivery time: ca. 3 weeks
BCA 90/A self-priming liquid ring pump
BCA 90/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 47 m
  • Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 10,9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71810030000
Shipping weight:
14.17 kg
Item weight:
10.90 kg
957,78 € *
Available
Delivery time: ca. 3 weeks
BCA 91/B self-priming liquid ring pump
BCA 91/B self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 60 m
  • Characteristic curve Q/H: 0 m3/h → 60 m; 0,48 m3/h → 53 m; 0,6 m3/h → 51 m; 0,75 m3/h → 48 m; 1 m3/h → 44 m; 1,2 m3/h → 39 m; 1,5 m3/h → 34 m; 1,89 m3/h → 26,5 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 12,9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
71810041000
Shipping weight:
16.77 kg
Item weight:
12.90 kg
1.049,92 € *
Available
Delivery time: ca. 3 weeks
BNG 3/A self-priming jet pump with built-in ejector
BNG 3/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 3 m3/h
  • Maximum pump head according to the characteristic curve: 52,1 m
  • Characteristic curve Q/H: 0 m3/h → 52,1 m; 0,25 m3/h → 49 m; 0,5 m3/h → 45,5 m; 1 m3/h → 40 m; 1,5 m3/h → 36 m; 2 m3/h → 32 m; 2,5 m3/h → 28 m; 3 m3/h → 24 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 127 mm; a1 8 mm; b 35 mm; fM 430 mm; g1 11 mm; h1 150 mm; h2 43 mm; HD 207 mm; m1 60 mm; m3 8 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 100 mm
  • Article weight: 20,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A40030000
Shipping weight:
26.78 kg
Item weight:
20.60 kg
1.517,63 € *
Available
Delivery time: ca. 3 weeks
BNG 5/16/A self-priming jet pump with built-in ejector
BNG 5/16/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 4,5 m3/h
  • Maximum pump head according to the characteristic curve: 64 m
  • Characteristic curve Q/H: 0 m3/h → 64 m; 0,5 m3/h → 59 m; 1 m3/h → 54 m; 1,5 m3/h → 50 m; 2 m3/h → 46 m; 2,5 m3/h → 43 m; 3 m3/h → 40 m; 3,5 m3/h → 37 m; 4 m3/h → 34,5 m; 4,5 m3/h → 32 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 32,1 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00041200
Shipping weight:
41.73 kg
Item weight:
32.10 kg
2.119,41 € *
Available
Delivery time: ca. 3 weeks
BNG 5/18/A self-priming jet pump with built-in ejector
BNG 5/18/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 53 m
  • Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 48,5 m; 1 m3/h → 46 m; 1,5 m3/h → 43,5 m; 2 m3/h → 41,5 m; 2,5 m3/h → 39,5 m; 3 m3/h → 38 m; 3,5 m3/h → 35,5 m; 4 m3/h → 34 m; 4,5 m3/h → 32 m; 5 m3/h → 30,5 m; 5,5 m3/h → 29 m; 6 m3/h → 28 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 32,1 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00042300
Shipping weight:
41.73 kg
Item weight:
32.10 kg
2.119,41 € *
Available
Delivery time: ca. 3 weeks
BNG 5/22/A self-priming jet pump with built-in ejector
BNG 5/22/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 36,5 m
  • Characteristic curve Q/H: 0 m3/h → 36,5 m; 0,5 m3/h → 35,5 m; 1 m3/h → 34,5 m; 1,5 m3/h → 33 m; 2 m3/h → 31,5 m; 2,5 m3/h → 30,5 m; 3 m3/h → 29,5 m; 3,5 m3/h → 28 m; 4 m3/h → 27 m; 4,5 m3/h → 26 m; 5 m3/h → 25 m; 5,5 m3/h → 23,5 m; 6 m3/h → 23 m; 6,5 m3/h → 21,5 m; 7 m3/h → 20,5 m; 8 m3/h → 18,5 m; 9 m3/h → 16,5 m; 9,5 m3/h → 15,5 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 32,1 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00043200
Shipping weight:
41.73 kg
Item weight:
32.10 kg
2.119,41 € *
Available
Delivery time: ca. 3 weeks
BNG 6/18/A self-priming jet pump with built-in ejector
BNG 6/18/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 67,3 m
  • Characteristic curve Q/H: 0 m3/h → 67,3 m; 0,5 m3/h → 64,5 m; 1 m3/h → 62 m; 1,5 m3/h → 59 m; 2 m3/h → 56 m; 2,5 m3/h → 54 m; 3 m3/h → 51 m; 3,5 m3/h → 48,5 m; 4 m3/h → 46 m; 4,5 m3/h → 43,5 m; 5 m3/h → 41,5 m; 5,5 m3/h → 39 m; 6 m3/h → 36,5 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 33,4 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00044200
Shipping weight:
43.42 kg
Item weight:
33.40 kg
2.247,56 € *
Available
Delivery time: ca. 3 weeks
BNG 6/22/A self-priming jet pump with built-in ejector
BNG 6/22/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 53 m
  • Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 51,5 m; 1 m3/h → 50 m; 1,5 m3/h → 48,5 m; 2 m3/h → 47 m; 2,5 m3/h → 46 m; 3 m3/h → 44,5 m; 3,5 m3/h → 43 m; 4 m3/h → 41,5 m; 4,5 m3/h → 40 m; 5 m3/h → 39 m; 5,5 m3/h → 37,5 m; 6 m3/h → 36,5 m; 6,5 m3/h → 35 m; 7 m3/h → 33,5 m; 8 m3/h → 31 m; 9 m3/h → 28,5 m; 9,5 m3/h → 27 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 33,4 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00045200
Shipping weight:
43.42 kg
Item weight:
33.40 kg
2.247,56 € *
Available
Delivery time: ca. 3 weeks
BNG 7/16/B self-priming jet pump with built-in ejector
BNG 7/16/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 9,2 A at 230 V / 5,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 4 m3/h
  • Maximum pump head according to the characteristic curve: 95 m
  • Characteristic curve Q/H: 0 m3/h → 95 m; 0,5 m3/h → 89 m; 1 m3/h → 83 m; 1,5 m3/h → 77 m; 2 m3/h → 72 m; 2,5 m3/h → 67 m; 3 m3/h → 62 m; 3,5 m3/h → 58 m; 4 m3/h → 54 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
  • Article weight: 36,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
71A00048300
Shipping weight:
47.58 kg
Item weight:
36.60 kg
2.344,39 € *
Available
Delivery time: ca. 3 weeks
BNG 7/18/B self-priming jet pump with built-in ejector
BNG 7/18/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 9,2 A at 230 V / 5,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 6,5 m3/h
  • Maximum pump head according to the characteristic curve: 77 m
  • Characteristic curve Q/H: 0 m3/h → 77 m; 0,5 m3/h → 74,5 m; 1 m3/h → 71,5 m; 1,5 m3/h → 68,5 m; 2 m3/h → 65,5 m; 2,5 m3/h → 63 m; 3 m3/h → 60 m; 3,5 m3/h → 57,5 m; 4 m3/h → 55 m; 4,5 m3/h → 53 m; 5 m3/h → 51 m; 5,5 m3/h → 49 m; 6 m3/h → 47 m; 6,5 m3/h → 45 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
  • Article weight: 36,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
71A00046300
Shipping weight:
47.58 kg
Item weight:
36.60 kg
2.344,39 € *
Available
Delivery time: ca. 3 weeks
BNG 7/22/B self-priming jet pump with built-in ejector
BNG 7/22/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 9,2 A at 230 V / 5,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 60 m
  • Characteristic curve Q/H: 0 m3/h → 60 m; 0,5 m3/h → 59 m; 1 m3/h → 57,5 m; 1,5 m3/h → 56,5 m; 2 m3/h → 55 m; 2,5 m3/h → 54 m; 3 m3/h → 52,5 m; 3,5 m3/h → 51 m; 4 m3/h → 50 m; 4,5 m3/h → 48,5 m; 5 m3/h → 47 m; 5,5 m3/h → 45,5 m; 6 m3/h → 44 m; 6,5 m3/h → 42,5 m; 7 m3/h → 41,5 m; 8 m3/h → 38 m; 9 m3/h → 35 m; 9,5 m3/h → 34 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
  • Article weight: 36,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
71A00047300
Shipping weight:
47.58 kg
Item weight:
36.60 kg
2.344,39 € *
Available
Delivery time: ca. 3 weeks
CA 60E self-priming liquid ring pump
CA 60E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,15 kW / 0,2 HP
  • Rated current: 1,7 A at 230 V / 1 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 0,75 m3/h
  • Maximum pump head according to the characteristic curve: 21,2 m
  • Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
  • Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
  • Article weight: 5,8 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
70820011000
Shipping weight:
7.54 kg
Item weight:
5.80 kg
399,16 € *
Available
Delivery time: ca. 3 weeks
CA 80E self-priming liquid ring pump
CA 80E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,45 kW / 0,6 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 1,89 m3/h
  • Maximum pump head according to the characteristic curve: 38 m
  • Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
  • Dimensions: a 72 mm; A 100 mm; a1 23 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 272 mm; H 63 mm; h1 126 mm; h2 27 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 17 mm; w 109 mm
  • Article weight: 7,5 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
70820020000
Shipping weight:
9.75 kg
Item weight:
7.50 kg
430,39 € *
Available
Delivery time: ca. 3 weeks
CA 90/A self-priming liquid ring pump
CA 90/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 47 m
  • Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 10 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
70820030000
Shipping weight:
13.00 kg
Item weight:
10.00 kg
481,28 € *
Available
Delivery time: ca. 3 weeks
CA 91/B self-priming liquid ring pump
CA 91/B self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 60 m
  • Characteristic curve Q/H: 0 m3/h → 60 m; 0,48 m3/h → 53 m; 0,6 m3/h → 51 m; 0,75 m3/h → 48 m; 1 m3/h → 44 m; 1,2 m3/h → 39 m; 1,5 m3/h → 34 m; 1,89 m3/h → 26,5 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 12 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
70820041000
Shipping weight:
15.60 kg
Item weight:
12.00 kg
566,81 € *
Available
Delivery time: ca. 3 weeks
MXA 203 horizontal multi-stage self-priming centrifugal pump
MXA 203 horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,37 kW / 0,5 HP
  • Rated current: 2,4 A at 230 V / 1,4 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 4 m3/h
  • Maximum pump head according to the characteristic curve: 32 m
  • Characteristic curve Q/H: 0 m3/h → 32 m; 1 m3/h → 28 m; 2 m3/h → 24 m; 3 m3/h → 19 m; 4 m3/h → 14 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 115 mm; b 30 mm; fM 362 mm; g1 10 mm; h1 116 mm; h2 61 mm; HD 176 mm; l5 161 mm; m1 33 mm; m3 8 mm; n1 146 mm; n2 112 mm; s 9 mm; w 102 mm; w1 102 mm
  • Article weight: 6,8 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
SKU:
662A0031000
Shipping weight:
8.84 kg
Item weight:
6.80 kg
408,38 € *
Available
Delivery time: ca. 3 weeks
MXA 204/A horizontal multi-stage self-priming centrifugal...
MXA 204/A horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 4,5 m3/h
  • Maximum pump head according to the characteristic curve: 45 m
  • Characteristic curve Q/H: 0 m3/h → 45 m; 1 m3/h → 40 m; 2 m3/h → 34 m; 3 m3/h → 27 m; 4 m3/h → 20 m; 4,5 m3/h → 15 m3/h
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 115 mm; b 30 mm; fM 691 mm; g1 10 mm; h1 116 mm; h2 61 mm; HD 192 mm; l5 161 mm; m1 33 mm; m3 8 mm; n1 146 mm; n2 112 mm; s 9 mm; w 112 mm; w1 112 mm
  • Article weight: 8,9 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
  • Revision: A
SKU:
662A0041000
Shipping weight:
11.57 kg
Item weight:
8.90 kg
449,44 € *
Available
Delivery time: ca. 3 weeks
MXA 205/B horizontal multi-stage self-priming centrifugal...
MXA 205/B horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 5 m3/h
  • Maximum pump head according to the characteristic curve: 55,5 m
  • Characteristic curve Q/H: 0 m3/h → 55,5 m; 1 m3/h → 50 m; 2 m3/h → 43 m; 3 m3/h → 35,5 m; 4 m3/h → 26,6 m; 4,5 m3/h → 21,4 m; 5 m3/h → 15,5 m
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/4; Pressure side DN2 G 1
  • Dimensions: a 140 mm; b 33 mm; fM 462 mm; g1 11 mm; h1 152 mm; h2 68 mm; HD 225 mm; l5 213.5 mm; m1 37.5 mm; m3 9.5 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 147 mm; w1 147 mm
  • Article weight: 12,8 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
  • Revision: BB
SKU:
662A0051200
Shipping weight:
16.64 kg
Item weight:
12.80 kg
669,29 € *
Available
Delivery time: ca. 3 weeks
MXA 403/A horizontal multi-stage self-priming centrifugal...
MXA 403/A horizontal multi-stage self-priming centrifugal pump
  • Construction: Horizontal, multi-stage, self-priming centrifugal pump of block construction; One-piece shell of stainless steel with chromium-nickel and steps of noryl
  • Design: Stainless steel design with jacket housing of AISI 304
  • Applications: For water supply, home and garden applications and watering
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2800 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 6,5 m3/h
  • Maximum pump head according to the characteristic curve: 34 m
  • Characteristic curve Q/H: 0 m3/h → 34 m; 2 m3/h → 30 m; 3 m3/h → 28 m; 4 m3/h → 25 m; 5 m3/h → 22 m; 6 m3/h → 17 m; 6,5 m3/h → 15 m3/h
  • Media temperature: 0 to +35 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 8 m
  • Maximum permissible working pressure: 8 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 115 mm; b 30 mm; fM 391 mm; g1 10 mm; h1 116 mm; h2 61 mm; HD 192 mm; l5 161 mm; m1 33 mm; m3 8 mm; n1 146 mm; n2 112 mm; s 9 mm; w 112 mm; w1 112 mm
  • Article weight: 8,8 kg
  • Materials: pump housing and housing cover AISI 304; shaft AISI 430F; suction and stepped housings and impeller Noryl PPO-GF20; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55
  • Revision: A
SKU:
662A1031000
Shipping weight:
11.44 kg
Item weight:
8.80 kg
465,80 € *
Available
Delivery time: ca. 3 weeks
Items 1 - 40 of 60