Gearhead
Items 1 - 30 of 108
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 15
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 18
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 15
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 18
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 15
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.95 kg
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 100
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 25
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 30
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 36
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
Items 1 - 30 of 108