Zum Hauptinhalt springen Zur Suche springen Zum Menü springen

Torque Motor K Series

  • Ideal für Wickler und Bahnspannungsregler
  • Drehmomenteinstellung durch Änderung der Spannung
  • Ausgangsleistung 3-40 W
Standard Artikelname von A bis Z Artikelname von Z bis A Preis aufsteigend Preis absteigend Gewicht Artikelnummer Erscheinungsdatum Neueste zuerst GTIN Bestseller
10 20 30 40 50
Artikel 1 - 20 von 385
TM520C-100SE SPECIAL MOTOR TM SERIES
TM520C-100SE SPECIAL MOTOR TM SERIES
Artikelnummer:
TM520C-100SE
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-100SJ SPECIAL MOTOR TM SERIES
TM520C-100SJ SPECIAL MOTOR TM SERIES
Artikelnummer:
TM520C-100SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-120SE SPECIAL MOTOR TM SERIES
TM520C-120SE SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 120
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz / 0.74 A / 151 W
    Single-Phase 220 VAC / 60 Hz / 0.72 A / 157 W
    Single-Phase 230 VAC / 50 Hz / 0.8 A / 169 W
    Single-Phase 230 VAC / 60 Hz / 0.76 A / 173 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 220 VAC / 50 Hz / 0.4 A / 54 W
    Single-Phase 220 VAC / 60 Hz / 0.39 A / 49 W
    Single-Phase 230 VAC / 50 Hz / 0.43 A / 60 W
    Single-Phase 230 VAC / 60 Hz / 0.41 A / 54 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 6.7 N·m
    60 Hz: 7.9 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 220 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-120SE
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-120SJ SPECIAL MOTOR TM SERIES
TM520C-120SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 120
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
    Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
    Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 6.3 N·m
    60 Hz: 6.7 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-120SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-150SE SPECIAL MOTOR TM SERIES
TM520C-150SE SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 150
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz / 0.74 A / 151 W
    Single-Phase 220 VAC / 60 Hz / 0.72 A / 157 W
    Single-Phase 230 VAC / 50 Hz / 0.8 A / 169 W
    Single-Phase 230 VAC / 60 Hz / 0.76 A / 173 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 220 VAC / 50 Hz / 0.4 A / 54 W
    Single-Phase 220 VAC / 60 Hz / 0.39 A / 49 W
    Single-Phase 230 VAC / 50 Hz / 0.43 A / 60 W
    Single-Phase 230 VAC / 60 Hz / 0.41 A / 54 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 8.4 N·m
    60 Hz: 9.9 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 220 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-150SE
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-150SJ SPECIAL MOTOR TM SERIES
TM520C-150SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 150
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
    Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
    Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 7.9 N·m
    60 Hz: 8.4 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-150SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-180SE SPECIAL MOTOR TM SERIES
TM520C-180SE SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 180
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz / 0.74 A / 151 W
    Single-Phase 220 VAC / 60 Hz / 0.72 A / 157 W
    Single-Phase 230 VAC / 50 Hz / 0.8 A / 169 W
    Single-Phase 230 VAC / 60 Hz / 0.76 A / 173 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 220 VAC / 50 Hz / 0.4 A / 54 W
    Single-Phase 220 VAC / 60 Hz / 0.39 A / 49 W
    Single-Phase 230 VAC / 50 Hz / 0.43 A / 60 W
    Single-Phase 230 VAC / 60 Hz / 0.41 A / 54 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 220 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-180SE
Versandgewicht:
5,79 kg
Artikelgewicht:
4,45 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-180SJ SPECIAL MOTOR TM SERIES
TM520C-180SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 180
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
    Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
    Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 9.5 N·m
    60 Hz: 10 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-180SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-50SE SPECIAL MOTOR TM SERIES
TM520C-50SE SPECIAL MOTOR TM SERIES
Artikelnummer:
TM520C-50SE
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-50SJ SPECIAL MOTOR TM SERIES
TM520C-50SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 50
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
    Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
    Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 9.9 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 2.6 N·m
    60 Hz: 2.8 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-50SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-60SE SPECIAL MOTOR TM SERIES
TM520C-60SE SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 60
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
    Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
    Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz / 0.74 A / 151 W
    Single-Phase 220 VAC / 60 Hz / 0.72 A / 157 W
    Single-Phase 230 VAC / 50 Hz / 0.8 A / 169 W
    Single-Phase 230 VAC / 60 Hz / 0.76 A / 173 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 220 VAC / 50 Hz / 0.4 A / 54 W
    Single-Phase 220 VAC / 60 Hz / 0.39 A / 49 W
    Single-Phase 230 VAC / 50 Hz / 0.43 A / 60 W
    Single-Phase 230 VAC / 60 Hz / 0.41 A / 54 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 3.4 N·m
    60 Hz: 4 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 220 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 230 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 220 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 220 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
    Single-Phase 230 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
    Single-Phase 230 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-60SE
Versandgewicht:
6,24 kg
Artikelgewicht:
4,80 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-60SJ SPECIAL MOTOR TM SERIES
TM520C-60SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 60
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
    Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
    Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 3.2 N·m
    60 Hz: 3.4 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-60SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-75SE SPECIAL MOTOR TM SERIES
TM520C-75SE SPECIAL MOTOR TM SERIES
Artikelnummer:
TM520C-75SE
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-75SJ SPECIAL MOTOR TM SERIES
TM520C-75SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 75
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
    Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
    Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
    Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 4 N·m
    60 Hz: 4.2 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
    Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520C-75SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-90SE SPECIAL MOTOR TM SERIES
TM520C-90SE SPECIAL MOTOR TM SERIES
Artikelnummer:
TM520C-90SE
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520C-90SJ SPECIAL MOTOR TM SERIES
TM520C-90SJ SPECIAL MOTOR TM SERIES
Artikelnummer:
TM520C-90SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
362,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520A-100SJ SPECIAL MOTOR TM SERIES
TM520A-100SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 100
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 100 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 100 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 100 VAC / 50 Hz / Torque Setting VoltageDC1.9 VAC※: Continuous
    Single-Phase 100 VAC / 60 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz / 1.18 A / 117 W
    Single-Phase 100 VAC / 60 Hz / 1.34 A / 134 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 100 VAC / 50 Hz / 0.72 A / 45 W
    Single-Phase 100 VAC / 60 Hz / 0.91 A / 55 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 100 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 100 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.9 VAC※)
    Single-Phase 100 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 5.3 N·m
    60 Hz: 5.6 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 100 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 100 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.9 VAC※)
    Single-Phase 100 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.5 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 100 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 100 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.9 VAC※)
    Single-Phase 100 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.5 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH180CFAUL2, Capacity: 18 µF, Rated voltage: 250 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520A-100SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
354,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520A-100SU SPECIAL MOTOR TM SERIES
TM520A-100SU SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 100
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 110 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 115 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 110 VAC / 60 Hz / Torque Setting VoltageDC1.4 VAC※: Continuous
    Single-Phase 115 VAC / 60 Hz / Torque Setting VoltageDC1.4 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz / 1.22 A / 134 W
    Single-Phase 115 VAC / 60 Hz / 1.29 A / 147 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 110 VAC / 60 Hz / 0.76 A / 51 W
    Single-Phase 115 VAC / 60 Hz / 0.79 A / 55 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 115 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 110 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.4 VAC※)
    Single-Phase 115 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.4 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 60 Hz: 6.6 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz: 23 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 115 VAC / 60 Hz: 23 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 110 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.4 VAC※)
    Single-Phase 115 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.4 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz: 900 r/min / 250 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 115 VAC / 60 Hz: 900 r/min / 250 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 110 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.4 VAC※)
    Single-Phase 115 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.4 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH140CFAUL2, Capacity: 14 µF, Rated voltage: 250 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520A-100SU
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
354,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520A-120SJ SPECIAL MOTOR TM SERIES
TM520A-120SJ SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 120
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 100 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 100 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 100 VAC / 50 Hz / Torque Setting VoltageDC1.9 VAC※: Continuous
    Single-Phase 100 VAC / 60 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz / 1.18 A / 117 W
    Single-Phase 100 VAC / 60 Hz / 1.34 A / 134 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 100 VAC / 50 Hz / 0.72 A / 45 W
    Single-Phase 100 VAC / 60 Hz / 0.91 A / 55 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 100 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 100 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.9 VAC※)
    Single-Phase 100 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 50 Hz: 10 N·m
    60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 50 Hz: 6.3 N·m
    60 Hz: 6.7 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 100 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 100 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.9 VAC※)
    Single-Phase 100 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.5 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 100 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 100 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 100 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.9 VAC※)
    Single-Phase 100 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.5 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH180CFAUL2, Capacity: 18 µF, Rated voltage: 250 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520A-120SJ
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
354,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
TM520A-120SU SPECIAL MOTOR TM SERIES
TM520A-120SU SPECIAL MOTOR TM SERIES
• Description of Specification Items
  • Frame Size: 90 mm
  • Shaft/Gear Type: Combination
  • Gear Ratio: 120
  • Rotation Direction: same direction as the motor shaft
  • Service Rating (When Locked): Single-Phase 110 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 115 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
    Single-Phase 110 VAC / 60 Hz / Torque Setting VoltageDC1.4 VAC※: Continuous
    Single-Phase 115 VAC / 60 Hz / Torque Setting VoltageDC1.4 VAC※: Continuous
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz / 1.22 A / 134 W
    Single-Phase 115 VAC / 60 Hz / 1.29 A / 147 W
  • Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 110 VAC / 60 Hz / 0.76 A / 51 W
    Single-Phase 115 VAC / 60 Hz / 0.79 A / 55 W
  • Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 115 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
  • Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 110 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.4 VAC※)
    Single-Phase 115 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.4 VAC※)
  • Gearhead Output Shaft Starting Torque (5 Minutes Service Rating): 60 Hz: 10 N·m
  • Gearhead Output Shaft Starting Torque (Continuous Service Rating): 60 Hz: 7.9 N·m
  • Maximum Output Power (5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz: 23 W (Torque Setting VoltageDC5.0 VAC※)
    Single-Phase 115 VAC / 60 Hz: 23 W (Torque Setting VoltageDC5.0 VAC※)
  • Maximum Output Power (Continuous Service Rating): Single-Phase 110 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.4 VAC※)
    Single-Phase 115 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.4 VAC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 110 VAC / 60 Hz: 900 r/min / 250 mN·m (Torque Setting Voltage5.0 VDC※)
    Single-Phase 115 VAC / 60 Hz: 900 r/min / 250 mN·m (Torque Setting Voltage5.0 VDC※)
  • Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 110 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.4 VAC※)
    Single-Phase 115 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.4 VAC※)
  • Permissible Inertia J: 1875×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH140CFAUL2, Capacity: 14 µF, Rated voltage: 250 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 4.0 kg (ギヤヘッド含む)
  • Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.

※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
• When moving horizontally under a load with a guide, etc., make sure that the load mass is less than the maximum transportable mass.
Output torque at times other than startup can be determined using a calculation formula.Please refer to "Output torque" (Other specifications).
Artikelnummer:
TM520A-120SU
Versandgewicht:
5,43 kg
Artikelgewicht:
4,18 kg
354,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
Artikel 1 - 20 von 385