AC-Motoren
- 4-/ 2-polig
- Ideal für Anwendungen, die Dauerbetrieb mit einer Drehrichtung erfordern
- Dreiphasige Motoren mit hohem Wirkungsgrad optimal für den Betrieb an Frequenzumrichtern sind ebenfalls verfügbar.
- Ausgangsleistung 1 bis 90 W
|
Drehzahl und Drehzahlbereich |
Stoppgenauigkeit | Getriebeeigenschaften |
| Der Induktionsmotor kann mit dem mitgelieferten Kondensators an einer einphasigen Stromversorgung betrieben werden. Ein dreiphasiger Motor benötigt keinen Kondensator. | Wenn der Motor gestoppt wird, tritt ein Nachlauf auf. Der Nachlauf kann reduziert werden, wenn ein Motor mit elektromagnetische Haltebremse oder ein Bremspack SB50W verwendet werden. |
Durch die Kombination von Motor und Getriebe ist es möglich, die Geschwindigkeit auf die gewünschte Geschwindigkeit zu reduzieren oder das Drehmoment zu erhöhen. |
 |
 |
|
Artikel 1 - 20 von 191
• Description of Specification Items
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 3.1 A
Single-Phase 100 VAC / 60 Hz / 3.3 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 0.88 N·m
Single-Phase 100 VAC / 60 Hz: 0.88 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 1.45 N·m / 1250 r/min
Single-Phase 100 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 50 r/min
Single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 37.4 N·m
Single-Phase 100 VAC / 60 Hz: 32.8 N·m - Permissible Inertia J: 1800×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH470CFAUL, Capacity: 47 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 8.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: Cable Type
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 1.6 A
Single-Phase 200 VAC / 60 Hz / 1.7 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 0.98 N·m
Single-Phase 200 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 1.49 N·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 83 r/min
Single-Phase 200 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 23.1 N·m
Single-Phase 200 VAC / 60 Hz: 19.7 N·m - Permissible Inertia J: 648×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH120BFAUL, Capacity: 12 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 8.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: Cable Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 1.6 A
Single-Phase 200 VAC / 60 Hz / 1.7 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 0.98 N·m
Single-Phase 200 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 1.49 N·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 1.27 N·m / 1500 r/min - Capacitor: Product name: CH120BFAUL, Capacity: 12 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: Cable Type
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 83 r/min
Single-Phase 220 VAC / 60 Hz: 100 r/min
Single-Phase 230 VAC / 50 Hz: 83 r/min
Single-Phase 230 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 20 N·m
Single-Phase 220 VAC / 60 Hz: 16.7 N·m
Single-Phase 230 VAC / 50 Hz: 20 N·m
Single-Phase 230 VAC / 60 Hz: 16.7 N·m - Permissible Inertia J: 648×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: Cable Type
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 500 r/min
Single-Phase 220 VAC / 60 Hz: 600 r/min
Single-Phase 230 VAC / 50 Hz: 500 r/min
Single-Phase 230 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.1 N·m
Single-Phase 220 VAC / 60 Hz: 3.4 N·m
Single-Phase 230 VAC / 50 Hz: 4.1 N·m
Single-Phase 230 VAC / 60 Hz: 3.4 N·m - Permissible Inertia J: 18×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 8.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: Cable Type
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 250 r/min
Single-Phase 220 VAC / 60 Hz: 300 r/min
Single-Phase 230 VAC / 50 Hz: 250 r/min
Single-Phase 230 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 6.7 N·m
Single-Phase 220 VAC / 60 Hz: 5.6 N·m
Single-Phase 230 VAC / 50 Hz: 6.7 N·m
Single-Phase 230 VAC / 60 Hz: 5.6 N·m - Permissible Inertia J: 72×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 500 r/min
Single-Phase 220 VAC / 60 Hz: 600 r/min
Single-Phase 230 VAC / 50 Hz: 500 r/min
Single-Phase 230 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.1 N·m
Single-Phase 220 VAC / 60 Hz: 3.4 N·m
Single-Phase 230 VAC / 50 Hz: 4.1 N·m
Single-Phase 230 VAC / 60 Hz: 3.4 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 18×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 417 r/min
Single-Phase 220 VAC / 60 Hz: 500 r/min
Single-Phase 230 VAC / 50 Hz: 417 r/min
Single-Phase 230 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.9 N·m
Single-Phase 220 VAC / 60 Hz: 4.1 N·m
Single-Phase 230 VAC / 50 Hz: 4.9 N·m
Single-Phase 230 VAC / 60 Hz: 4.1 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 25×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 300 r/min
Single-Phase 220 VAC / 60 Hz: 360 r/min
Single-Phase 230 VAC / 50 Hz: 300 r/min
Single-Phase 230 VAC / 60 Hz: 360 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 6.8 N·m
Single-Phase 220 VAC / 60 Hz: 5.7 N·m
Single-Phase 230 VAC / 50 Hz: 6.8 N·m
Single-Phase 230 VAC / 60 Hz: 5.7 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 50×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 250 r/min
Single-Phase 220 VAC / 60 Hz: 300 r/min
Single-Phase 230 VAC / 50 Hz: 250 r/min
Single-Phase 230 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 8.2 N·m
Single-Phase 220 VAC / 60 Hz: 6.9 N·m
Single-Phase 230 VAC / 50 Hz: 8.2 N·m
Single-Phase 230 VAC / 60 Hz: 6.9 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 72×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 200 r/min
Single-Phase 220 VAC / 60 Hz: 240 r/min
Single-Phase 230 VAC / 50 Hz: 200 r/min
Single-Phase 230 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 10.3 N·m
Single-Phase 220 VAC / 60 Hz: 8.6 N·m
Single-Phase 230 VAC / 50 Hz: 10.3 N·m
Single-Phase 230 VAC / 60 Hz: 8.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 112×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 167 r/min
Single-Phase 220 VAC / 60 Hz: 200 r/min
Single-Phase 230 VAC / 50 Hz: 167 r/min
Single-Phase 230 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 12.3 N·m
Single-Phase 220 VAC / 60 Hz: 10.3 N·m
Single-Phase 230 VAC / 50 Hz: 12.3 N·m
Single-Phase 230 VAC / 60 Hz: 10.3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 162×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 6.5 kg
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Discontinued
31.3.2025
Discontinued Product
Discontinued
31.3.2025
Discontinued Product
Discontinued
31.3.2025
Discontinued Product
Discontinued
31.3.2025
Discontinued Product
Discontinued
31.3.2025
Discontinued Product
Discontinued
31.3.2025
Discontinued Product
Discontinued
31.3.2025
Discontinued Product
Artikel 1 - 20 von 191