Zum Hauptinhalt springen Zur Suche springen Zum Menü springen

AC-Motoren

  • 4-/ 2-polig
  • Ideal für Anwendungen, die Dauerbetrieb mit einer Drehrichtung erfordern
  • Dreiphasige Motoren mit hohem Wirkungsgrad optimal für den Betrieb an Frequenzumrichtern sind ebenfalls verfügbar.
  • Ausgangsleistung 1 bis 90 W

Drehzahl und Drehzahlbereich
 Stoppgenauigkeit Getriebeeigenschaften
Der Induktionsmotor kann mit dem mitgelieferten Kondensators an einer einphasigen Stromversorgung betrieben werden. Ein dreiphasiger Motor benötigt keinen Kondensator. Wenn der Motor gestoppt wird, tritt ein Nachlauf auf.
Der Nachlauf kann reduziert werden, wenn ein Motor mit elektromagnetische Haltebremse oder ein Bremspack SB50W verwendet werden.		 Durch die Kombination von Motor und Getriebe ist es möglich, die Geschwindigkeit auf die gewünschte Geschwindigkeit zu reduzieren oder das Drehmoment zu erhöhen.

Induktionsmotoren
Induktionswendemotoren
Low-Speed Synchronous Motors SMK Series
Motoren mit elektromagnetischer Bremse
Reluctance Motor
Speed Control Motor AC
Torque Motor K Series
Getriebekopf
Watertight, Dust-Resistant Motors FPW Series
Linear Heads
Zubehör
Standard Artikelname von A bis Z Artikelname von Z bis A Preis aufsteigend Preis absteigend Gewicht Artikelnummer Erscheinungsdatum Neueste zuerst GTIN Bestseller
10 20 30 40 50
Artikel 1 - 30 von 191
BHI62EMT-3 MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62EMT-3 MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 3
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
    Single-Phase 220 VAC / 60 Hz / 1.5 A
    Single-Phase 230 VAC / 50 Hz / 1.5 A
    Single-Phase 230 VAC / 60 Hz / 1.5 A
  • Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
    Single-Phase 220 VAC / 60 Hz: 0.98 N·m
    Single-Phase 230 VAC / 50 Hz: 0.98 N·m
    Single-Phase 230 VAC / 60 Hz: 0.98 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
    Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min
  • The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 500 r/min
    Single-Phase 220 VAC / 60 Hz: 600 r/min
    Single-Phase 230 VAC / 50 Hz: 500 r/min
    Single-Phase 230 VAC / 60 Hz: 600 r/min
  • Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.1 N·m
    Single-Phase 220 VAC / 60 Hz: 3.4 N·m
    Single-Phase 230 VAC / 50 Hz: 4.1 N·m
    Single-Phase 230 VAC / 60 Hz: 3.4 N·m
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Permissible Inertia J: 18×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62EMT-3
Versandgewicht:
12,35 kg
Artikelgewicht:
9,50 kg
528,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62EMT-3.6 MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62EMT-3.6 MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 3.6
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
    Single-Phase 220 VAC / 60 Hz / 1.5 A
    Single-Phase 230 VAC / 50 Hz / 1.5 A
    Single-Phase 230 VAC / 60 Hz / 1.5 A
  • Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
    Single-Phase 220 VAC / 60 Hz: 0.98 N·m
    Single-Phase 230 VAC / 50 Hz: 0.98 N·m
    Single-Phase 230 VAC / 60 Hz: 0.98 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
    Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min
  • The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 417 r/min
    Single-Phase 220 VAC / 60 Hz: 500 r/min
    Single-Phase 230 VAC / 50 Hz: 417 r/min
    Single-Phase 230 VAC / 60 Hz: 500 r/min
  • Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.9 N·m
    Single-Phase 220 VAC / 60 Hz: 4.1 N·m
    Single-Phase 230 VAC / 50 Hz: 4.9 N·m
    Single-Phase 230 VAC / 60 Hz: 4.1 N·m
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Permissible Inertia J: 25×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62EMT-3.6
Versandgewicht:
12,35 kg
Artikelgewicht:
9,50 kg
528,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62EMT-5 MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62EMT-5 MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 5
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
    Single-Phase 220 VAC / 60 Hz / 1.5 A
    Single-Phase 230 VAC / 50 Hz / 1.5 A
    Single-Phase 230 VAC / 60 Hz / 1.5 A
  • Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
    Single-Phase 220 VAC / 60 Hz: 0.98 N·m
    Single-Phase 230 VAC / 50 Hz: 0.98 N·m
    Single-Phase 230 VAC / 60 Hz: 0.98 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
    Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min
  • The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 300 r/min
    Single-Phase 220 VAC / 60 Hz: 360 r/min
    Single-Phase 230 VAC / 50 Hz: 300 r/min
    Single-Phase 230 VAC / 60 Hz: 360 r/min
  • Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 6.8 N·m
    Single-Phase 220 VAC / 60 Hz: 5.7 N·m
    Single-Phase 230 VAC / 50 Hz: 6.8 N·m
    Single-Phase 230 VAC / 60 Hz: 5.7 N·m
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Permissible Inertia J: 50×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62EMT-5
Versandgewicht:
12,35 kg
Artikelgewicht:
9,50 kg
528,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62EMT-6 MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62EMT-6 MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 6
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
    Single-Phase 220 VAC / 60 Hz / 1.5 A
    Single-Phase 230 VAC / 50 Hz / 1.5 A
    Single-Phase 230 VAC / 60 Hz / 1.5 A
  • Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
    Single-Phase 220 VAC / 60 Hz: 0.98 N·m
    Single-Phase 230 VAC / 50 Hz: 0.98 N·m
    Single-Phase 230 VAC / 60 Hz: 0.98 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
    Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min
  • The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 250 r/min
    Single-Phase 220 VAC / 60 Hz: 300 r/min
    Single-Phase 230 VAC / 50 Hz: 250 r/min
    Single-Phase 230 VAC / 60 Hz: 300 r/min
  • Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 8.2 N·m
    Single-Phase 220 VAC / 60 Hz: 6.9 N·m
    Single-Phase 230 VAC / 50 Hz: 8.2 N·m
    Single-Phase 230 VAC / 60 Hz: 6.9 N·m
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Permissible Inertia J: 72×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62EMT-6
Versandgewicht:
12,35 kg
Artikelgewicht:
9,50 kg
528,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62EMT-7.5 MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62EMT-7.5 MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 7.5
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
    Single-Phase 220 VAC / 60 Hz / 1.5 A
    Single-Phase 230 VAC / 50 Hz / 1.5 A
    Single-Phase 230 VAC / 60 Hz / 1.5 A
  • Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
    Single-Phase 220 VAC / 60 Hz: 0.98 N·m
    Single-Phase 230 VAC / 50 Hz: 0.98 N·m
    Single-Phase 230 VAC / 60 Hz: 0.98 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
    Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min
  • The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 200 r/min
    Single-Phase 220 VAC / 60 Hz: 240 r/min
    Single-Phase 230 VAC / 50 Hz: 200 r/min
    Single-Phase 230 VAC / 60 Hz: 240 r/min
  • Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 10.3 N·m
    Single-Phase 220 VAC / 60 Hz: 8.6 N·m
    Single-Phase 230 VAC / 50 Hz: 10.3 N·m
    Single-Phase 230 VAC / 60 Hz: 8.6 N·m
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Permissible Inertia J: 112×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62EMT-7.5
Versandgewicht:
12,35 kg
Artikelgewicht:
9,50 kg
528,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62EMT-9 MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62EMT-9 MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 9
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
    Single-Phase 220 VAC / 60 Hz / 1.5 A
    Single-Phase 230 VAC / 50 Hz / 1.5 A
    Single-Phase 230 VAC / 60 Hz / 1.5 A
  • Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
    Single-Phase 220 VAC / 60 Hz: 0.98 N·m
    Single-Phase 230 VAC / 50 Hz: 0.98 N·m
    Single-Phase 230 VAC / 60 Hz: 0.98 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
    Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
    Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min
  • The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 167 r/min
    Single-Phase 220 VAC / 60 Hz: 200 r/min
    Single-Phase 230 VAC / 50 Hz: 167 r/min
    Single-Phase 230 VAC / 60 Hz: 200 r/min
  • Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 12.3 N·m
    Single-Phase 220 VAC / 60 Hz: 10.3 N·m
    Single-Phase 230 VAC / 50 Hz: 12.3 N·m
    Single-Phase 230 VAC / 60 Hz: 10.3 N·m
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Permissible Inertia J: 162×10<sup>-4</sup> kg·m<sup>2</sup>
  • Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
  • Overheat Protective Device Type: Thermal protector
  • Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62EMT-9
Versandgewicht:
12,35 kg
Artikelgewicht:
9,50 kg
528,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62SMT-A MOTOR WITH MAGNETIC BRAKE BH SERIES
BHI62SMT-A MOTOR WITH MAGNETIC BRAKE BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: -
  • Time Rating: Continuous
  • Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 1.1 A
    Three-Phase 200 VAC / 60 Hz / 1.1 A
    Three-Phase 220 VAC / 60 Hz / 0.95 A
    Three-Phase 230 VAC VAC / 60 Hz / 0.95 A
  • Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 1.49 N·m
    Three-Phase 200 VAC / 60 Hz: 1.25 N·m
    Three-Phase 220 VAC / 60 Hz: 1.23 N·m
    Three-Phase 230 VAC VAC / 60 Hz: 1.18 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 1.49 N·m / 1250 r/min
    Three-Phase 200 VAC / 60 Hz: 1.25 N·m / 1500 r/min
    Three-Phase 220 VAC / 60 Hz: 1.23 N·m / 1550 r/min
    Three-Phase 230 VAC VAC / 60 Hz: 1.18 N·m / 1600 r/min
  • Electromagnetic Brake Brake Type: Power off activated type
  • Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.09 A / 12 W
    Single-Phase 200 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
    Single-Phase 230 VAC VAC / 60 Hz / 0.09 A / 12 W
  • Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
  • Overheat Protective Device Type: Thermal protector
  • Mass: 6.5 kg
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikelnummer:
BHI62SMT-A
Versandgewicht:
8,45 kg
Artikelgewicht:
6,50 kg
476,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-100RH GENERAL MOTOR BH SERIES
BHI62UT2-100RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 100
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 15 r/min
    Three-Phase 380 VAC / 60 Hz: 18 r/min
    Three-Phase 400 VAC / 50 Hz: 15 r/min
    Three-Phase 400 VAC / 60 Hz: 18 r/min
    Three-Phase 415 VAC / 50 Hz: 15 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 54.5 N·m
    Three-Phase 380 VAC / 60 Hz: 54.5 N·m
    Three-Phase 400 VAC / 50 Hz: 54.5 N·m
    Three-Phase 400 VAC / 60 Hz: 54.5 N·m
    Three-Phase 415 VAC / 50 Hz: 54.5 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-100RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-120RH GENERAL MOTOR BH SERIES
BHI62UT2-120RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 120
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 12.5 r/min
    Three-Phase 380 VAC / 60 Hz: 15 r/min
    Three-Phase 400 VAC / 50 Hz: 12.5 r/min
    Three-Phase 400 VAC / 60 Hz: 15 r/min
    Three-Phase 415 VAC / 50 Hz: 12.5 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 60 N·m
    Three-Phase 380 VAC / 60 Hz: 60 N·m
    Three-Phase 400 VAC / 50 Hz: 60 N·m
    Three-Phase 400 VAC / 60 Hz: 60 N·m
    Three-Phase 415 VAC / 50 Hz: 60 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-120RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-150RH GENERAL MOTOR BH SERIES
BHI62UT2-150RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 150
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 10 r/min
    Three-Phase 380 VAC / 60 Hz: 12 r/min
    Three-Phase 400 VAC / 50 Hz: 10 r/min
    Three-Phase 400 VAC / 60 Hz: 12 r/min
    Three-Phase 415 VAC / 50 Hz: 10 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 60 N·m
    Three-Phase 380 VAC / 60 Hz: 60 N·m
    Three-Phase 400 VAC / 50 Hz: 60 N·m
    Three-Phase 400 VAC / 60 Hz: 60 N·m
    Three-Phase 415 VAC / 50 Hz: 60 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-150RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-180RH GENERAL MOTOR BH SERIES
BHI62UT2-180RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 180
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 8.3 r/min
    Three-Phase 380 VAC / 60 Hz: 10 r/min
    Three-Phase 400 VAC / 50 Hz: 8.3 r/min
    Three-Phase 400 VAC / 60 Hz: 10 r/min
    Three-Phase 415 VAC / 50 Hz: 8.3 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 60 N·m
    Three-Phase 380 VAC / 60 Hz: 60 N·m
    Three-Phase 400 VAC / 50 Hz: 60 N·m
    Three-Phase 400 VAC / 60 Hz: 60 N·m
    Three-Phase 415 VAC / 50 Hz: 60 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-180RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-50RH GENERAL MOTOR BH SERIES
BHI62UT2-50RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 50
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 30 r/min
    Three-Phase 380 VAC / 60 Hz: 36 r/min
    Three-Phase 400 VAC / 50 Hz: 30 r/min
    Three-Phase 400 VAC / 60 Hz: 36 r/min
    Three-Phase 415 VAC / 50 Hz: 30 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-50RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-60RH GENERAL MOTOR BH SERIES
BHI62UT2-60RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 60
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 25 r/min
    Three-Phase 380 VAC / 60 Hz: 30 r/min
    Three-Phase 400 VAC / 50 Hz: 25 r/min
    Three-Phase 400 VAC / 60 Hz: 30 r/min
    Three-Phase 415 VAC / 50 Hz: 25 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 43 N·m
    Three-Phase 380 VAC / 60 Hz: 43 N·m
    Three-Phase 400 VAC / 50 Hz: 43 N·m
    Three-Phase 400 VAC / 60 Hz: 43 N·m
    Three-Phase 415 VAC / 50 Hz: 43 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-60RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-75RH GENERAL MOTOR BH SERIES
BHI62UT2-75RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 75
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 20 r/min
    Three-Phase 380 VAC / 60 Hz: 24 r/min
    Three-Phase 400 VAC / 50 Hz: 20 r/min
    Three-Phase 400 VAC / 60 Hz: 24 r/min
    Three-Phase 415 VAC / 50 Hz: 20 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 47 N·m
    Three-Phase 380 VAC / 60 Hz: 47 N·m
    Three-Phase 400 VAC / 50 Hz: 47 N·m
    Three-Phase 400 VAC / 60 Hz: 47 N·m
    Three-Phase 415 VAC / 50 Hz: 47 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-75RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-90RH GENERAL MOTOR BH SERIES
BHI62UT2-90RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 90
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 17 r/min
    Three-Phase 380 VAC / 60 Hz: 20 r/min
    Three-Phase 400 VAC / 50 Hz: 17 r/min
    Three-Phase 400 VAC / 60 Hz: 20 r/min
    Three-Phase 415 VAC / 50 Hz: 17 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 51.5 N·m
    Three-Phase 380 VAC / 60 Hz: 51.5 N·m
    Three-Phase 400 VAC / 50 Hz: 51.5 N·m
    Three-Phase 400 VAC / 60 Hz: 51.5 N·m
    Three-Phase 415 VAC / 50 Hz: 51.5 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-90RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
432,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-100RA GENERAL MOTOR BH SERIES
BHI62UT2-100RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 100
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 15 r/min
    Three-Phase 380 VAC / 60 Hz: 18 r/min
    Three-Phase 400 VAC / 50 Hz: 15 r/min
    Three-Phase 400 VAC / 60 Hz: 18 r/min
    Three-Phase 415 VAC / 50 Hz: 15 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 54.5 N·m
    Three-Phase 380 VAC / 60 Hz: 54.5 N·m
    Three-Phase 400 VAC / 50 Hz: 54.5 N·m
    Three-Phase 400 VAC / 60 Hz: 54.5 N·m
    Three-Phase 415 VAC / 50 Hz: 54.5 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-100RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-120RA GENERAL MOTOR BH SERIES
BHI62UT2-120RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 120
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 12.5 r/min
    Three-Phase 380 VAC / 60 Hz: 15 r/min
    Three-Phase 400 VAC / 50 Hz: 12.5 r/min
    Three-Phase 400 VAC / 60 Hz: 15 r/min
    Three-Phase 415 VAC / 50 Hz: 12.5 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 60 N·m
    Three-Phase 380 VAC / 60 Hz: 60 N·m
    Three-Phase 400 VAC / 50 Hz: 60 N·m
    Three-Phase 400 VAC / 60 Hz: 60 N·m
    Three-Phase 415 VAC / 50 Hz: 60 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-120RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-150RA GENERAL MOTOR BH SERIES
BHI62UT2-150RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 150
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 10 r/min
    Three-Phase 380 VAC / 60 Hz: 12 r/min
    Three-Phase 400 VAC / 50 Hz: 10 r/min
    Three-Phase 400 VAC / 60 Hz: 12 r/min
    Three-Phase 415 VAC / 50 Hz: 10 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 60 N·m
    Three-Phase 380 VAC / 60 Hz: 60 N·m
    Three-Phase 400 VAC / 50 Hz: 60 N·m
    Three-Phase 400 VAC / 60 Hz: 60 N·m
    Three-Phase 415 VAC / 50 Hz: 60 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-150RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-180RA GENERAL MOTOR BH SERIES
BHI62UT2-180RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 180
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 8.3 r/min
    Three-Phase 380 VAC / 60 Hz: 10 r/min
    Three-Phase 400 VAC / 50 Hz: 8.3 r/min
    Three-Phase 400 VAC / 60 Hz: 10 r/min
    Three-Phase 415 VAC / 50 Hz: 8.3 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 60 N·m
    Three-Phase 380 VAC / 60 Hz: 60 N·m
    Three-Phase 400 VAC / 50 Hz: 60 N·m
    Three-Phase 400 VAC / 60 Hz: 60 N·m
    Three-Phase 415 VAC / 50 Hz: 60 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-180RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-50RA GENERAL MOTOR BH SERIES
BHI62UT2-50RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 50
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 30 r/min
    Three-Phase 380 VAC / 60 Hz: 36 r/min
    Three-Phase 400 VAC / 50 Hz: 30 r/min
    Three-Phase 400 VAC / 60 Hz: 36 r/min
    Three-Phase 415 VAC / 50 Hz: 30 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-50RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-60RA GENERAL MOTOR BH SERIES
BHI62UT2-60RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 60
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 25 r/min
    Three-Phase 380 VAC / 60 Hz: 30 r/min
    Three-Phase 400 VAC / 50 Hz: 25 r/min
    Three-Phase 400 VAC / 60 Hz: 30 r/min
    Three-Phase 415 VAC / 50 Hz: 25 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 43 N·m
    Three-Phase 380 VAC / 60 Hz: 43 N·m
    Three-Phase 400 VAC / 50 Hz: 43 N·m
    Three-Phase 400 VAC / 60 Hz: 43 N·m
    Three-Phase 415 VAC / 50 Hz: 43 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-60RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-75RA GENERAL MOTOR BH SERIES
BHI62UT2-75RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 75
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 20 r/min
    Three-Phase 380 VAC / 60 Hz: 24 r/min
    Three-Phase 400 VAC / 50 Hz: 20 r/min
    Three-Phase 400 VAC / 60 Hz: 24 r/min
    Three-Phase 415 VAC / 50 Hz: 20 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 47 N·m
    Three-Phase 380 VAC / 60 Hz: 47 N·m
    Three-Phase 400 VAC / 50 Hz: 47 N·m
    Three-Phase 400 VAC / 60 Hz: 47 N·m
    Three-Phase 415 VAC / 50 Hz: 47 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-75RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-90RA GENERAL MOTOR BH SERIES
BHI62UT2-90RA GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 90
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 17 r/min
    Three-Phase 380 VAC / 60 Hz: 20 r/min
    Three-Phase 400 VAC / 50 Hz: 17 r/min
    Three-Phase 400 VAC / 60 Hz: 20 r/min
    Three-Phase 415 VAC / 50 Hz: 17 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 51.5 N·m
    Three-Phase 380 VAC / 60 Hz: 51.5 N·m
    Three-Phase 400 VAC / 50 Hz: 51.5 N·m
    Three-Phase 400 VAC / 60 Hz: 51.5 N·m
    Three-Phase 415 VAC / 50 Hz: 51.5 N·m
  • Permissible Inertia J: 5000×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-90RA
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
426,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 6 Wochen
BHI62UT2-12.5RH GENERAL MOTOR BH SERIES
BHI62UT2-12.5RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 12.5
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 120 r/min
    Three-Phase 380 VAC / 60 Hz: 144 r/min
    Three-Phase 400 VAC / 50 Hz: 120 r/min
    Three-Phase 400 VAC / 60 Hz: 144 r/min
    Three-Phase 415 VAC / 50 Hz: 120 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 13.4 N·m
    Three-Phase 380 VAC / 60 Hz: 11.3 N·m
    Three-Phase 400 VAC / 50 Hz: 13.4 N·m
    Three-Phase 400 VAC / 60 Hz: 11.3 N·m
    Three-Phase 415 VAC / 50 Hz: 13.4 N·m
  • Permissible Inertia J: 312×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-12.5RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-15RH GENERAL MOTOR BH SERIES
BHI62UT2-15RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 15
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 100 r/min
    Three-Phase 380 VAC / 60 Hz: 120 r/min
    Three-Phase 400 VAC / 50 Hz: 100 r/min
    Three-Phase 400 VAC / 60 Hz: 120 r/min
    Three-Phase 415 VAC / 50 Hz: 100 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 16.1 N·m
    Three-Phase 380 VAC / 60 Hz: 13.6 N·m
    Three-Phase 400 VAC / 50 Hz: 16.1 N·m
    Three-Phase 400 VAC / 60 Hz: 13.6 N·m
    Three-Phase 415 VAC / 50 Hz: 16.1 N·m
  • Permissible Inertia J: 450×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-15RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-18RH GENERAL MOTOR BH SERIES
BHI62UT2-18RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 18
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 83 r/min
    Three-Phase 380 VAC / 60 Hz: 100 r/min
    Three-Phase 400 VAC / 50 Hz: 83 r/min
    Three-Phase 400 VAC / 60 Hz: 100 r/min
    Three-Phase 415 VAC / 50 Hz: 83 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 19.3 N·m
    Three-Phase 380 VAC / 60 Hz: 16.3 N·m
    Three-Phase 400 VAC / 50 Hz: 19.3 N·m
    Three-Phase 400 VAC / 60 Hz: 16.3 N·m
    Three-Phase 415 VAC / 50 Hz: 19.3 N·m
  • Permissible Inertia J: 648×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-18RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-25RH GENERAL MOTOR BH SERIES
BHI62UT2-25RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 25
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 60 r/min
    Three-Phase 380 VAC / 60 Hz: 72 r/min
    Three-Phase 400 VAC / 50 Hz: 60 r/min
    Three-Phase 400 VAC / 60 Hz: 72 r/min
    Three-Phase 415 VAC / 50 Hz: 60 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 26.8 N·m
    Three-Phase 380 VAC / 60 Hz: 22.6 N·m
    Three-Phase 400 VAC / 50 Hz: 26.8 N·m
    Three-Phase 400 VAC / 60 Hz: 22.6 N·m
    Three-Phase 415 VAC / 50 Hz: 26.8 N·m
  • Permissible Inertia J: 1250×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-25RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-30RH GENERAL MOTOR BH SERIES
BHI62UT2-30RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 30
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 50 r/min
    Three-Phase 380 VAC / 60 Hz: 60 r/min
    Three-Phase 400 VAC / 50 Hz: 50 r/min
    Three-Phase 400 VAC / 60 Hz: 60 r/min
    Three-Phase 415 VAC / 50 Hz: 50 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 32.2 N·m
    Three-Phase 380 VAC / 60 Hz: 27.2 N·m
    Three-Phase 400 VAC / 50 Hz: 32.2 N·m
    Three-Phase 400 VAC / 60 Hz: 27.2 N·m
    Three-Phase 415 VAC / 50 Hz: 32.2 N·m
  • Permissible Inertia J: 1800×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-30RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-36RH GENERAL MOTOR BH SERIES
BHI62UT2-36RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 36
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 42 r/min
    Three-Phase 380 VAC / 60 Hz: 50 r/min
    Three-Phase 400 VAC / 50 Hz: 42 r/min
    Three-Phase 400 VAC / 60 Hz: 50 r/min
    Three-Phase 415 VAC / 50 Hz: 42 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 36 N·m
    Three-Phase 380 VAC / 60 Hz: 32.6 N·m
    Three-Phase 400 VAC / 50 Hz: 36 N·m
    Three-Phase 400 VAC / 60 Hz: 32.6 N·m
    Three-Phase 415 VAC / 50 Hz: 36 N·m
  • Permissible Inertia J: 2592×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-36RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
BHI62UT2-5RH GENERAL MOTOR BH SERIES
BHI62UT2-5RH GENERAL MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • Series: BH Series
  • Type: With Terminal Box
  • Gear Ratio: 5
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing Gearhead: Three-Phase 380 VAC / 50 Hz: 300 r/min
    Three-Phase 380 VAC / 60 Hz: 360 r/min
    Three-Phase 400 VAC / 50 Hz: 300 r/min
    Three-Phase 400 VAC / 60 Hz: 360 r/min
    Three-Phase 415 VAC / 50 Hz: 300 r/min
  • Permissible Torque of Gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 5.4 N·m
    Three-Phase 380 VAC / 60 Hz: 4.5 N·m
    Three-Phase 400 VAC / 50 Hz: 5.4 N·m
    Three-Phase 400 VAC / 60 Hz: 4.5 N·m
    Three-Phase 415 VAC / 50 Hz: 5.4 N·m
  • Permissible Inertia J: 50×10<sup>-4</sup> kg·m<sup>2</sup>
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Artikelnummer:
BHI62UT2-5RH
Versandgewicht:
13,00 kg
Artikelgewicht:
10,00 kg
414,00 € *
lieferbar
bei Ihnen eintreffend ca.: ca. 5 Wochen
Artikel 1 - 30 von 191