DHM42PAK ACTUATOR

Artikelnummer:DHM42PAK
HAN: DHM42PAK
Hersteller: ORIENTAL MOTOR

Frame Size: 42 mm
Repetitive Positioning Accuracy: ±0.05°
Rotor Inertia J: 25.5×10^-6 kg·m²
Rated Current: 0.75 A/Phase
Basic Step Angle: 0.72°
Stop Position Accuracy: ±0.11°
Maximum Holding Torque: 0.175 N·m
Holding Torque at Motor Standstill When Energized: 0.087 N·m
Permissible Axial Load: 150 N
Permissible Moment: 0.4 N·m
Runout of Output Table (Hollow Flange) Surface: 0.05 mm
Runout of Output Table (Hollow Flange) Inner (Outer) Diameter: 0.05 mm

434,35 € 365,00 € exkl. USt.

inkl. 19% USt. , zzgl.

lieferbar
Lieferzeit: bei Ihnen eintreffend: ca. 6 Wochen (DE - Ausland abweichend)

Stk

Beschreibung

Description of Specification Items

Frame Size: 42 mm
Repetitive Positioning Accuracy: ±0.05°
Rotor Inertia J: 25.5×10<sup>-6</sup> kg·m<sup>2</sup>
Rated Current: 0.75 A/Phase
Basic Step Angle: 0.72°
Stop Position Accuracy: ±0.11°
Maximum Holding Torque: 0.175 N·m
Holding Torque at Motor Standstill When Energized: 0.087 N·m
Permissible Axial Load: 150 N
Permissible Moment: 0.4 N·m
Runout of Output Table (Hollow Flange) Surface: 0.05 mm
Runout of Output Table (Hollow Flange) Inner (Outer) Diameter: 0.05 mm
Actuator Part Mass: 0.47 kg

[Note]
• The accuracy is measured at a constant temperature (normal ambient temperature) under a constant load.
• Set the driver's "setting current" so that it does not exceed the rated current of the actuator.
Exceeding the rated current of the actuator may cause damage to the product.