Watertight, Dust-Resistant Motors FPW Series
Entwickelt und strukturiert für wasserdichte und staubresistente Leistung.
EPLAN Daten sind im Data Portal von EPLAN hinterlegt.
Die Korrosionsschutzeigenschaften wurden durch die Verwendung einer speziellen Beschichtung und die Überarbeitung des Wellenmaterials [Edelstahl (Serie SUS303)] verbessert.
Die Geräte dieser Serie entsprechen den zertifizierten UL/CSA-Normen und sind mit dem CE-Zeichen (Niederspannungsrichtlinie) versehen. Außerdem haben wir die Zertifizierung durch das China Compulsory Certification System (CCC-System) erhalten.).
Artikel 1 - 50 von 84
- Ausgangsleistung: 25 W
- Motor-Rahmengröße: 83 mm
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Vorsichtsmaßnahmen bei der Verdrahtung
Die Klemmen des Motorkabels sind nicht wasserdicht. Stellen Sie sicher, dass kein Wasser an die Klemmen gelangt. Anderenfalls kann das Wasser
über den Zuleitungsdraht oder das Baumwollgarn in den Motor gelangen, was zu Schäden des Motors führen kann.
• Description of Specification Items
• The product name written on the motor nameplate is FPW425C2-100. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-100E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 100
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 15 r/min
Single-Phase 200 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 7.9 N·m
Single-Phase 200 VAC / 60 Hz: 7.9 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-12.5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-12.5E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 12.5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 120 r/min
Single-Phase 200 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 2.1 N·m
Single-Phase 200 VAC / 60 Hz: 1.7 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 1.2 N·m
Single-Phase 200 VAC / 60 Hz: 1.2 N·m - Permissible Inertia J: 48.4×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-120. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-120E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 120
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 12.5 r/min
Single-Phase 200 VAC / 60 Hz: 15 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-150. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-150E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 150
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 10 r/min
Single-Phase 200 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-15. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-15E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 15
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 100 r/min
Single-Phase 200 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 2.5 N·m
Single-Phase 200 VAC / 60 Hz: 2.1 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 1.5 N·m
Single-Phase 200 VAC / 60 Hz: 1.5 N·m - Permissible Inertia J: 69.8×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 180
- Time Rating: Continuous
- Thermal Class: 130 (B)
- Overheat Protective Device: Built-in thermal protector (automatic return type)
Open: 130 ±5 °C, Return: 85 ±20 °C - Operating Ambient Temperature: Single-phase 100 VAC, single-phase 200 VAC, three-phase 200 VAC: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing) - Degree of Protection: IP67
• The product name written on the motor nameplate is FPW425C2-18. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-18E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 18
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 83 r/min
Single-Phase 200 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 3 N·m
Single-Phase 200 VAC / 60 Hz: 2.5 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 1.7 N·m
Single-Phase 200 VAC / 60 Hz: 1.7 N·m - Permissible Inertia J: 100×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-25. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-25E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 25
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 60 r/min
Single-Phase 200 VAC / 60 Hz: 72 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 3.7 N·m
Single-Phase 200 VAC / 60 Hz: 3.1 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 2.2 N·m
Single-Phase 200 VAC / 60 Hz: 2.2 N·m - Permissible Inertia J: 194×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-3.6. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-3.6E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 3.6
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 416 r/min
Single-Phase 200 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.6 N·m
Single-Phase 200 VAC / 60 Hz: 0.5 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.35 N·m
Single-Phase 200 VAC / 60 Hz: 0.35 N·m - Permissible Inertia J: 4.02×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-30. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-30E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 30
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 50 r/min
Single-Phase 200 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 4.5 N·m
Single-Phase 200 VAC / 60 Hz: 3.7 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 2.6 N·m
Single-Phase 200 VAC / 60 Hz: 2.6 N·m - Permissible Inertia J: 279×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-36. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-36E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 36
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 41 r/min
Single-Phase 200 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 5.4 N·m
Single-Phase 200 VAC / 60 Hz: 4.5 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 3.2 N·m
Single-Phase 200 VAC / 60 Hz: 3.2 N·m - Permissible Inertia J: 402×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-3. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-3E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 3
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 500 r/min
Single-Phase 200 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.5 N·m
Single-Phase 200 VAC / 60 Hz: 0.41 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.29 N·m
Single-Phase 200 VAC / 60 Hz: 0.29 N·m - Permissible Inertia J: 2.79×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-50. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-50E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 50
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 30 r/min
Single-Phase 200 VAC / 60 Hz: 36 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 6.8 N·m
Single-Phase 200 VAC / 60 Hz: 5.6 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 4 N·m
Single-Phase 200 VAC / 60 Hz: 4 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-5E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 300 r/min
Single-Phase 200 VAC / 60 Hz: 360 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.83 N·m
Single-Phase 200 VAC / 60 Hz: 0.69 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.49 N·m
Single-Phase 200 VAC / 60 Hz: 0.49 N·m - Permissible Inertia J: 7.75×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-60. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-60E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 60
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 25 r/min
Single-Phase 200 VAC / 60 Hz: 30 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 6.7 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 4.8 N·m
Single-Phase 200 VAC / 60 Hz: 4.8 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-6. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-6E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 6
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 250 r/min
Single-Phase 200 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1 N·m
Single-Phase 200 VAC / 60 Hz: 0.83 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.58 N·m
Single-Phase 200 VAC / 60 Hz: 0.58 N·m - Permissible Inertia J: 11.2×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-7.5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-7.5E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 7.5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 200 r/min
Single-Phase 200 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.2 N·m
Single-Phase 200 VAC / 60 Hz: 1 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.73 N·m
Single-Phase 200 VAC / 60 Hz: 0.73 N·m - Permissible Inertia J: 17.4×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-75. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-75E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 75
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 20 r/min
Single-Phase 200 VAC / 60 Hz: 24 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 5.9 N·m
Single-Phase 200 VAC / 60 Hz: 5.9 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-90. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-90E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 90
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 16.6 r/min
Single-Phase 200 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8 N·m
Single-Phase 200 VAC / 60 Hz: 8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 7.1 N·m
Single-Phase 200 VAC / 60 Hz: 7.1 N·m - Permissible Inertia J: 775×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW425C2-9. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW425C2-9E)
- Frame Size: 83 mm
- Output Power: 25 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 9
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 166 r/min
Single-Phase 200 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.5 N·m
Single-Phase 200 VAC / 60 Hz: 1.2 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.87 N·m
Single-Phase 200 VAC / 60 Hz: 0.87 N·m - Permissible Inertia J: 25.1×10⁻⁴ kg·m²
- Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 3.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 40 W
- Motor-Rahmengröße: 90 mm
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Befestigungsschrauben inkl. Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl sind enthalten.
- Motor-Rahmengröße: 90 mm
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Befestigungsschrauben inkl. Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl sind enthalten.
Vorsichtsmaßnahmen bei der Verdrahtung
Die Klemmen des Motorkabels sind nicht wasserdicht. Stellen Sie sicher, dass kein Wasser an die Klemmen gelangt. Anderenfalls kann das Wasser
über den Zuleitungsdraht oder das Baumwollgarn in den Motor gelangen, was zu Schäden des Motors führen kann.
• The product name written on the motor nameplate is FPW540C2-100. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-100E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 100
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 15 r/min
Single-Phase 200 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-12.5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-12.5E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 12.5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 120 r/min
Single-Phase 200 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 3.2 N·m
Single-Phase 200 VAC / 60 Hz: 2.6 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 2 N·m
Single-Phase 200 VAC / 60 Hz: 2 N·m - Permissible Inertia J: 117×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-120. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-120E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 120
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 12.5 r/min
Single-Phase 200 VAC / 60 Hz: 15 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-150. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-150E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 150
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 10 r/min
Single-Phase 200 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-15. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-15E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 15
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 100 r/min
Single-Phase 200 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 3.8 N·m
Single-Phase 200 VAC / 60 Hz: 3.2 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 2.4 N·m
Single-Phase 200 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 169×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-180. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-180E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 180
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 8.3 r/min
Single-Phase 200 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-18. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-18E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 18
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 83 r/min
Single-Phase 200 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 4.6 N·m
Single-Phase 200 VAC / 60 Hz: 3.8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 2.9 N·m
Single-Phase 200 VAC / 60 Hz: 2.9 N·m - Permissible Inertia J: 243×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-25. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-25E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 25
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 60 r/min
Single-Phase 200 VAC / 60 Hz: 72 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 5.7 N·m
Single-Phase 200 VAC / 60 Hz: 4.7 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 3.7 N·m
Single-Phase 200 VAC / 60 Hz: 3.7 N·m - Permissible Inertia J: 469×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-3.6. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-3.6E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 3.6
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 416 r/min
Single-Phase 200 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.92 N·m
Single-Phase 200 VAC / 60 Hz: 0.76 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.58 N·m
Single-Phase 200 VAC / 60 Hz: 0.58 N·m - Permissible Inertia J: 9.72×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-30. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-30E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 30
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 50 r/min
Single-Phase 200 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 6.9 N·m
Single-Phase 200 VAC / 60 Hz: 5.7 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 4.4 N·m
Single-Phase 200 VAC / 60 Hz: 4.4 N·m - Permissible Inertia J: 675×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-36. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-36E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 36
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 41 r/min
Single-Phase 200 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 8.3 N·m
Single-Phase 200 VAC / 60 Hz: 6.8 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 5.3 N·m
Single-Phase 200 VAC / 60 Hz: 5.3 N·m - Permissible Inertia J: 972×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-3. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-3E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 3
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 500 r/min
Single-Phase 200 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.77 N·m
Single-Phase 200 VAC / 60 Hz: 0.63 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.49 N·m
Single-Phase 200 VAC / 60 Hz: 0.49 N·m - Permissible Inertia J: 6.75×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-50. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-50E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 50
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 30 r/min
Single-Phase 200 VAC / 60 Hz: 36 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 8.6 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 6.6 N·m
Single-Phase 200 VAC / 60 Hz: 6.6 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-5E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 300 r/min
Single-Phase 200 VAC / 60 Hz: 360 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.3 N·m
Single-Phase 200 VAC / 60 Hz: 1.1 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.81 N·m
Single-Phase 200 VAC / 60 Hz: 0.81 N·m - Permissible Inertia J: 18.8×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-60. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-60E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 60
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 25 r/min
Single-Phase 200 VAC / 60 Hz: 30 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 7.9 N·m
Single-Phase 200 VAC / 60 Hz: 7.9 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-6. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-6E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 6
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 250 r/min
Single-Phase 200 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.5 N·m
Single-Phase 200 VAC / 60 Hz: 1.3 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 0.97 N·m
Single-Phase 200 VAC / 60 Hz: 0.97 N·m - Permissible Inertia J: 27×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-7.5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-7.5E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 7.5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 200 r/min
Single-Phase 200 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.9 N·m
Single-Phase 200 VAC / 60 Hz: 1.6 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 1.2 N·m
Single-Phase 200 VAC / 60 Hz: 1.2 N·m - Permissible Inertia J: 42.2×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-75. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-75E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 75
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 20 r/min
Single-Phase 200 VAC / 60 Hz: 24 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 9.9 N·m
Single-Phase 200 VAC / 60 Hz: 9.9 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-90. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-90E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 90
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 16.6 r/min
Single-Phase 200 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 10 N·m
Single-Phase 200 VAC / 60 Hz: 10 N·m - Permissible Inertia J: 1875×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW540C2-9. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW540C2-9E)
- Frame Size: 91.5 mm
- Output Power: 40 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 9
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.39 A
Single-Phase 200 VAC / 60 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 200 mN·m
Single-Phase 200 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 166 r/min
Single-Phase 200 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 2.3 N·m
Single-Phase 200 VAC / 60 Hz: 1.9 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 1.5 N·m
Single-Phase 200 VAC / 60 Hz: 1.5 N·m - Permissible Inertia J: 60.8×10⁻⁴ kg·m²
- Capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 4.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 60 W
- Motor-Rahmengröße: 90 mm
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Befestigungsschrauben inkl. Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl sind enthalten.
- Motor-Rahmengröße: 90 mm
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Befestigungsschrauben inkl. Unterlegscheiben und Muttern aus korrosionsbeständiger Stahl sind enthalten.
Vorsichtsmaßnahmen bei der Verdrahtung
Die Klemmen des Motorkabels sind nicht wasserdicht. Stellen Sie sicher, dass kein Wasser an die Klemmen gelangt. Anderenfalls kann das Wasser
über den Zuleitungsdraht oder das Baumwollgarn in den Motor gelangen, was zu Schäden des Motors führen kann.
• The product name written on the motor nameplate is FPW560C2-100. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-100E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 100
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 15 r/min
Single-Phase 200 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Permissible Inertia J: 2750×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW560C2-12.5. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-12.5E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 12.5
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 120 r/min
Single-Phase 200 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 4.5 N·m
Single-Phase 200 VAC / 60 Hz: 3.7 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 2.7 N·m
Single-Phase 200 VAC / 60 Hz: 2.7 N·m - Permissible Inertia J: 172×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW560C2-120. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-120E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 120
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 12.5 r/min
Single-Phase 200 VAC / 60 Hz: 15 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Permissible Inertia J: 2750×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW560C2-150. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-150E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 150
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 10 r/min
Single-Phase 200 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Permissible Inertia J: 2750×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW560C2-15. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-15E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 15
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 100 r/min
Single-Phase 200 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 5.4 N·m
Single-Phase 200 VAC / 60 Hz: 4.4 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 3.3 N·m
Single-Phase 200 VAC / 60 Hz: 3.3 N·m - Permissible Inertia J: 248×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW560C2-180. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-180E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 180
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 8.3 r/min
Single-Phase 200 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 15 N·m
Single-Phase 200 VAC / 60 Hz: 15 N·m - Permissible Inertia J: 2750×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is FPW560C2-18. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (FPW560C2-18E)
- Frame Size: 91.5 mm
- Output Power: 60 W
- Shaft/Gear Type: Parallel Shaft Gearhead (Geared Motor Type)
- Gear Ratio: 18
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.54 A
Single-Phase 200 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 300 mN·m
Single-Phase 200 VAC / 60 Hz: 300 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 83 r/min
Single-Phase 200 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 6.4 N·m
Single-Phase 200 VAC / 60 Hz: 5.3 N·m - Gearhead Output Shaft Starting Torque: Single-Phase 200 VAC / 50 Hz: 3.9 N·m
Single-Phase 200 VAC / 60 Hz: 3.9 N·m - Permissible Inertia J: 356×10⁻⁴ kg·m²
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 5.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
Artikel 1 - 50 von 84