ORIENTAL MOTOR
Artikel 6151 - 6180 von 16597
- Materials: Vinyl chloride
- Dimensions A x B (Unit: mm): 58×29
UL listed product.UL File No.E56078
- Drive System: Microstep Drive, Unipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 1.5 A
- Speed And Positioning Control Command: Pulse Input
- Maximum Input Pulse Frequency: 100 kHz (at 50% duty)
- Circuit Mass: 0.05 kg
- Drive System: Microstep Drive, Unipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 1.7 A
- Speed And Positioning Control Command: Pulse Input
- Maximum Input Pulse Frequency: 100 kHz (at 50% duty)
- Circuit Mass: 0.05 kg
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Excitation Mode: Microstep
- Protective Function: When the following protective functions are activated, an alarm signal is output to stop the motor.
Overheat, Overvoltage, Excessive position deviation, ±LS simultaneous input, ±LS reverse connection, return-to-home operation error
Offset error in return-to-home operation, HOMES not detected, TIM, Z, SLIT signal error, hardware overtravel
Software overtravel, operation data error, RS-485 communication error, RS-485 communication timeout
Network bus error, network converter error, EEPROM error - Data-Select Positioning Number: 63 Points
- Positioning Operation: Single-motion, Linked-motion, Linked-motion2, Sequential
- Continuous Operation: Available
- Jog Operation: Available
- Return-To-Mechanical Home Operation: 2-sensor/3-sensor mode
- Return-To-Electrical Home Operation: Available
- Test Operation: Available
- Circuit Mass: 0.2 kg
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Excitation Mode: Microstep
- Protective Function: When the following protective functions are activated, an alarm signal is output to stop the motor.
Overheat, Overvoltage, Excessive position deviation, ±LS simultaneous input, ±LS reverse connection, return-to-home operation error
Offset error in return-to-home operation, HOMES not detected, TIM, Z, SLIT signal error, hardware overtravel
Software overtravel, operation data error, RS-485 communication error, RS-485 communication timeout
Network bus error, network converter error, EEPROM error - Data-Select Positioning Number: 63 Points
- Positioning Operation: Single-motion, Linked-motion, Linked-motion2, Sequential
- Continuous Operation: Available
- Jog Operation: Available
- Return-To-Mechanical Home Operation: 2-sensor/3-sensor mode
- Return-To-Electrical Home Operation: Available
- Test Operation: Available
- Circuit Mass: 0.2 kg
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Excitation Mode: Microstep
- Protective Function: When the following protective functions are activated, an alarm signal is output to stop the motor.
Overheat, Overvoltage, Excessive position deviation, ±LS simultaneous input, ±LS reverse connection, return-to-home operation error
Offset error in return-to-home operation, HOMES not detected, TIM, Z, SLIT signal error, hardware overtravel
Software overtravel, operation data error, RS-485 communication error, RS-485 communication timeout
Network bus error, network converter error, EEPROM error - Data-Select Positioning Number: 63 Points
- Positioning Operation: Single-motion, Linked-motion, Linked-motion2, Sequential
- Continuous Operation: Available
- Jog Operation: Available
- Return-To-Mechanical Home Operation: 2-sensor/3-sensor mode
- Return-To-Electrical Home Operation: Available
- Test Operation: Available
- Circuit Mass: 0.2 kg
- Driver Type: Without Mounting Plate
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Excitation Mode: Microstep
- Speed And Positioning Control Command: Pulse Input
- Maximum Input Pulse Frequency: 500 kHz (at 50% duty)
- Circuit Mass: 0.04 kg
- Driver Type: Without Mounting Plate
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Excitation Mode: Microstep
- Speed And Positioning Control Command: Pulse Input
- Maximum Input Pulse Frequency: 500 kHz (at 50% duty)
- Circuit Mass: 0.04 kg
Motor Connector Set
This is a set of connector housings and contacts compatible with connector-coupled motor.
Each package contains enough housings and contacts for 30 motors.
Please note: this item is a connector set only and not a pre-assembled motor cable. Compatibility refers to the connector interface.
31.3.2027
Product to be Discontinued
Motor Connector Set
Motor Connector Set
Motor Connector Set
- Driver Type: Pulse Input Type
- Driver Shape: Without Mounting Plate
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 0.5 A
- Motor Drive Current (Factory Setting): 0.5 A/Phase
- Circuit Mass: 0.02 kg
- Driver Type: Pulse Input Type
- Driver Shape: With Mounting Plate Right Angle
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 0.5 A
- Motor Drive Current (Factory Setting): 0.5 A/Phase
- Circuit Mass: 0.06 kg
- Driver Type: Pulse Input Type
- Driver Shape: With Mounting Plate Right Angle
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 0.5 A
- Motor Drive Current (Factory Setting): 0.6 A/Phase
- Circuit Mass: 0.06 kg
- Driver Type: Pulse Input Type
- Driver Shape: With Mounting Plate
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 1.9 A
- Motor Drive Current (Factory Setting): 1.5 A/Phase
- Circuit Mass: 0.06 kg
- Driver Type: Pulse Input Type
- Driver Shape: With Mounting Plate Right Angle
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 1.9 A
- Motor Drive Current (Factory Setting): 1.5 A/Phase
- Circuit Mass: 0.06 kg
- Driver Type: Pulse Input Type
- Driver Shape: Without Mounting Plate
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 2.0 A
- Motor Drive Current (Factory Setting): 2.3 A/Phase
- Circuit Mass: 0.02 kg
- Driver Type: Pulse Input Type
- Driver Shape: With Mounting Plate
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 2.0 A
- Motor Drive Current (Factory Setting): 2.3 A/Phase
- Circuit Mass: 0.06 kg
- Driver Type: Pulse Input Type
- Driver Shape: With Mounting Plate Right Angle
- 2-Phase/5-Phase: 2-Phase
- Drive System: Microstep Drive, Bipolar constant-current drive method
- Power Supply Input Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Current: 2.0 A
- Motor Drive Current (Factory Setting): 2.3 A/Phase
- Circuit Mass: 0.06 kg
Artikel 6151 - 6180 von 16597