ORIENTAL MOTOR
Artikel 7521 - 7560 von 16597
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 300
- Capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.6 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 360
- Capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.6 kg (including gearhead）
- Ausgangsleistung: 40 W
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• Description of Specification Items
• The product name written on the motor nameplate is 5RK40A-CW2M. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (5RK40A-CW2ME)
- Frame Size: 90 mm
- Output Power: 40 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.4 A
Single-Phase 200 VAC / 60 Hz / 0.51 A
Single-Phase 220 VAC / 50 Hz / 0.4 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 270 mN·m
Single-Phase 200 VAC / 60 Hz: 260 mN·m
Single-Phase 220 VAC / 50 Hz: 270 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 315 mN·m / 1250 r/min
Single-Phase 200 VAC / 60 Hz: 260 mN·m / 1500 r/min
Single-Phase 220 VAC / 50 Hz: 315 mN·m / 1250 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.05 A / 7 W
Single-Phase 200 VAC / 60 Hz / 0.05 A / 7 W
Single-Phase 220 VAC / 50 Hz / 0.05 A / 7 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 200 mN·m
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.8 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. (The power supply to the electromagnetic brake is kept and the brake is released.) When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 40 W
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 90 mm
- Output Power: 60 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.59 A
Single-Phase 200 VAC / 60 Hz / 0.68 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 480 mN·m
Single-Phase 200 VAC / 60 Hz: 490 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 430 mN·m / 1340 r/min
Single-Phase 200 VAC / 60 Hz: 360 mN·m / 1610 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.04 A / 6 W
Single-Phase 200 VAC / 60 Hz / 0.04 A / 6 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 500 mN·m
- Capacitor: Product name: CH60BFAUL, Capacity: 6.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.7 kg
• It does no built-in simple brake similar to reversible motor
If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
(The power supply to the electromagnetic brake is kept and the brake is released.)
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
(The power supply to the electromagnetic brake is kept and the brake is released.)
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 42 mm
- Type: TH Geared
- Shaft Type: Single Shaft
- Electromagnetic Brake: Not Equipped
- Cable Outlet Direction: Down Side
- Maximum Holding Torque: 1 N·m
- Rotor Inertia J: 58×10⁻⁷ kg·m²
- Gear Ratio: 10
- Resolution at 1000P/R Setting: 0.036°/pulse
- Permissible Torque: 1 N·m
- Holding Torque at Motor Standstill When Energized: 0.96 N·m
- Speed Range: 0–180 r/min
- Backlash: 25 arcmin (0.42°)
- Motor Thermal Class: 130 (B)
- Degree of Protection for Motor: IP65 (Excluding the mounting surface and the connector part)
- Motor Section Mass: 0.62 kg
- Frame Size: 42 mm
- Type: TH Geared
- Shaft Type: Single Shaft
- Electromagnetic Brake: Not Equipped
- Cable Outlet Direction: Down Side
- Maximum Holding Torque: 1.5 N·m
- Rotor Inertia J: 58×10⁻⁷ kg·m²
- Gear Ratio: 20
- Resolution at 1000P/R Setting: 0.018°/pulse
- Permissible Torque: 1.5 N·m
- Holding Torque at Motor Standstill When Energized: 1.4 N·m
- Speed Range: 0–90 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Thermal Class: 130 (B)
- Degree of Protection for Motor: IP65 (Excluding the mounting surface and the connector part)
- Motor Section Mass: 0.62 kg
- Frame Size: 42 mm
- Type: TH Geared
- Shaft Type: Single Shaft
- Electromagnetic Brake: Not Equipped
- Cable Outlet Direction: Down Side
- Maximum Holding Torque: 1.5 N·m
- Rotor Inertia J: 58×10⁻⁷ kg·m²
- Gear Ratio: 30
- Resolution at 1000P/R Setting: 0.012°/pulse
- Permissible Torque: 1.5 N·m
- Holding Torque at Motor Standstill When Energized: 1.5 N·m
- Speed Range: 0–60 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Thermal Class: 130 (B)
- Degree of Protection for Motor: IP65 (Excluding the mounting surface and the connector part)
- Motor Section Mass: 0.62 kg
- Frame Size: 42 mm
- Type: TH Geared
- Shaft Type: Single Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 58×10⁻⁷ kg·m²
- Gear Ratio: 10
- Resolution at 1000P/R Setting: 0.036°/pulse
- Backlash: 25 arcmin (0.417°)
- Motor Section Mass: 0.62 kg
- Frame Size: 42 mm
- Type: TH Geared
- Shaft Type: Single Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 58×10⁻⁷ kg·m²
- Gear Ratio: 30
- Resolution at 1000P/R Setting: 0.012°/pulse
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 0.62 kg
- Applicable Product: BLE2 Series
- Connection Point: Motor~circuit
- Cable Type: Flexible
- Length: 7 m
- Frame Size: 90 mm
- Output Power: 60 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 2
- Capacitor: Product Name: CH180CFAUL2, Capacitance: 18 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 4.4 kg (including gearhead）
- Frame Size: 90 mm
- Output Power: 60 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 3
- Capacitor: Product Name: CH180CFAUL2, Capacitance: 18 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 4.4 kg (including gearhead）
- Frame Size: 90 mm
- Output Power: 60 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 2
- Capacitor: Product Name: CH120CFAUL2, Capacitance: 12 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 4.4 kg (including gearhead）
- Frame Size: 90 mm
- Output Power: 40 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.32 A
Three-Phase 200 VAC / 60 Hz / 0.3 A
Three-Phase 220 VAC / 60 Hz / 0.3 A
Three-Phase 230 VAC VAC / 60 Hz / 0.31 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 400 mN·m
Three-Phase 200 VAC / 60 Hz: 260 mN·m
Three-Phase 220 VAC / 60 Hz: 260 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 260 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 300 mN·m / 1300 r/min
Three-Phase 200 VAC / 60 Hz: 260 mN·m / 1550 r/min
Three-Phase 220 VAC / 60 Hz: 260 mN·m / 1600 r/min
Three-Phase 230 VAC VAC / 60 Hz: 260 mN·m / 1600 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.05 A / 7 W
Single-Phase 200 VAC / 60 Hz / 0.05 A / 7 W
Single-Phase 220 VAC / 60 Hz / 0.05 A / 7 W
Single-Phase 230 VAC VAC / 60 Hz / 0.05 A / 7 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 200 mN·m
- Capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.8 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. (The power supply to the electromagnetic brake is kept and the brake is released.) When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 90 mm
- Output Power: 40 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.32 A
Three-Phase 200 VAC / 60 Hz / 0.3 A
Three-Phase 220 VAC / 60 Hz / 0.3 A
Three-Phase 230 VAC VAC / 60 Hz / 0.31 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 400 mN·m
Three-Phase 200 VAC / 60 Hz: 260 mN·m
Three-Phase 220 VAC / 60 Hz: 260 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 260 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 300 mN·m / 1300 r/min
Three-Phase 200 VAC / 60 Hz: 260 mN·m / 1550 r/min
Three-Phase 220 VAC / 60 Hz: 260 mN·m / 1600 r/min
Three-Phase 230 VAC VAC / 60 Hz: 260 mN·m / 1600 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.05 A / 7 W
Single-Phase 200 VAC / 60 Hz / 0.05 A / 7 W
Single-Phase 220 VAC / 60 Hz / 0.05 A / 7 W
Single-Phase 230 VAC VAC / 60 Hz / 0.05 A / 7 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 200 mN·m
- Capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.8 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. (The power supply to the electromagnetic brake is kept and the brake is released.) When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 90 mm
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Service Rating (When Locked): Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
Single-Phase 220 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
Single-Phase 220 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous
Single-Phase 230 VAC / 50 Hz / Torque Setting VoltageDC1.5 VAC※: Continuous
Single-Phase 230 VAC / 60 Hz / Torque Setting VoltageDC1.1 VAC※: Continuous - Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz / 0.74 A / 151 W
Single-Phase 220 VAC / 60 Hz / 0.72 A / 157 W
Single-Phase 230 VAC / 50 Hz / 0.8 A / 169 W
Single-Phase 230 VAC / 60 Hz / 0.76 A / 173 W - Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 220 VAC / 50 Hz / 0.4 A / 54 W
Single-Phase 220 VAC / 60 Hz / 0.39 A / 49 W
Single-Phase 230 VAC / 50 Hz / 0.43 A / 60 W
Single-Phase 230 VAC / 60 Hz / 0.41 A / 54 W - Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 220 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 230 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 230 VAC / 60 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※) - Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
Single-Phase 220 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※)
Single-Phase 230 VAC / 50 Hz: 85 mN·m (Torque Setting VoltageDC1.5 VAC※)
Single-Phase 230 VAC / 60 Hz: 100 mN·m (Torque Setting VoltageDC1.1 VAC※) - Maximum Output Power (5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 220 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 230 VAC / 50 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 230 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※) - Maximum Output Power (Continuous Service Rating): Single-Phase 220 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
Single-Phase 220 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※)
Single-Phase 230 VAC / 50Hz: 4.5 W (Torque Setting VoltageDC1.5 VAC※)
Single-Phase 230 VAC / 60Hz: 5.5 W (Torque Setting VoltageDC1.1 VAC※) - Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
Single-Phase 220 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※)
Single-Phase 230 VAC / 50 Hz: 750 r/min / 260 mN·m (Torque Setting Voltage5.0 VDC※)
Single-Phase 230 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※) - Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 220 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
Single-Phase 220 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※)
Single-Phase 230 VAC / 50 Hz: 750 r/min / 60 mN·m (Torque Setting VoltageDC1.5 VAC※)
Single-Phase 230 VAC / 60 Hz: 900 r/min / 60 mN·m (Torque Setting VoltageDC1.1 VAC※) - Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 2.5 kg
- Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.
※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
- Frame Size: 90 mm
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Service Rating (When Locked): Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC5.0 VAC※: 5Minutes
Single-Phase 200 VAC / 50 Hz / Torque Setting VoltageDC1.6 VAC※: Continuous
Single-Phase 200 VAC / 60 Hz / Torque Setting VoltageDC1.2 VAC※: Continuous - Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz / 0.67 A / 128 W
Single-Phase 200 VAC / 60 Hz / 0.69 A / 138 W - Voltage/ Frequency/ Maximum Input Current/ Maximum Power Consumption(Continuous Service Rating): Single-Phase 200 VAC / 50 Hz / 0.38 A / 47 W
Single-Phase 200 VAC / 60 Hz / 0.42 A / 50 W - Starting Torque (Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 350 mN·m (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 200 VAC / 60 Hz: 300 mN·m (Torque Setting VoltageDC5.0 VAC※) - Starting Torque (Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 80 mN·m (Torque Setting VoltageDC1.6 VAC※)
Single-Phase 200 VAC / 60 Hz: 85 mN·m (Torque Setting VoltageDC1.2 VAC※) - Maximum Output Power (5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 18 W (Torque Setting VoltageDC5.0 VAC※)
Single-Phase 200 VAC / 60 Hz: 20 W (Torque Setting VoltageDC5.0 VAC※) - Maximum Output Power (Continuous Service Rating): Single-Phase 200 VAC / 50Hz: 4 W (Torque Setting VoltageDC1.6 VAC※)
Single-Phase 200 VAC / 60Hz: 4 W (Torque Setting VoltageDC1.2 VAC※) - Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, 5 Minutes Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 240 mN·m (Torque Setting Voltage5.0 VDC※)
Single-Phase 200 VAC / 60 Hz: 900 r/min / 220 mN·m (Torque Setting Voltage5.0 VDC※) - Speed at Maximum Output Power/ Torque at Maximum Output Power(Motor Shaft, Continuous Service Rating): Single-Phase 200 VAC / 50 Hz: 750 r/min / 50 mN·m (Torque Setting VoltageDC1.6 VAC※)
Single-Phase 200 VAC / 60 Hz: 900 r/min / 45 mN·m (Torque Setting VoltageDC1.2 VAC※) - Capacitor: Product name: CH45BFAUL, Capacity: 4.5 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 2.5 kg
- Circuit Mass: 0.18 kg
• The UL/CSA and CCC mark apply to the Motor.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.
• The UL mark apply to the Circuit.
• The CE mark apply to the Motor and the Circuit.
• Various safety standards certifications have been obtained for an individual motor product name and an individual circuit product names.
※ The torque setting voltage indicates the value when the external voltage select switch is set to the "5 V" position.
• This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
Artikel 7521 - 7560 von 16597