ORIENTAL MOTOR
Artikel 4411 - 4440 von 16597
Description of Specification Items.
- Frame Size: 104 mm
- Rated Output Power: 200 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Electromagnetic Brake: Equipped
- Included Cable: 1 m
- Power Supply Input Rated Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 13 A
- Power Supply Input Maximum Input Current: 25 A
- Rating Torque (Motor Shaft): 0.65 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.15 N·m *1
- Permissible Torque: 2.9 N·m (20–600 r/min)
2.0 N·m (800 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 20–800 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 100×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 50×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type, automatically controlled by the driver *3
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.65 N·m
- Motor Section Mass: 6.4 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 200 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Electromagnetic Brake: Equipped
- Included Cable: 2 m
- Power Supply Input Rated Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 13 A
- Power Supply Input Maximum Input Current: 25 A
- Rating Torque (Motor Shaft): 0.65 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.15 N·m *1
- Permissible Torque: 2.9 N·m (20–600 r/min)
2.0 N·m (800 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 20–800 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 100×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 50×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type, automatically controlled by the driver *3
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.65 N·m
- Motor Section Mass: 6.4 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 200 W
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Equipped
- Included Cable: 1 m
- Power Supply Input Rated Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 13 A
- Power Supply Input Maximum Input Current: 25 A
- Rating Torque (Motor Shaft): 0.65 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.15 N·m *1
- Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 100–4000 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 8.75×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 8.75×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type, automatically controlled by the driver *3
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.65 N·m
- Motor Section Mass: 3.4 kg
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 200 W
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Equipped
- Included Cable: 2 m
- Power Supply Input Rated Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 13 A
- Power Supply Input Maximum Input Current: 25 A
- Rating Torque (Motor Shaft): 0.65 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.15 N·m *1
- Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 100–4000 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 8.75×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 8.75×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type, automatically controlled by the driver *3
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.65 N·m
- Motor Section Mass: 3.4 kg
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 100
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 1 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 110 N·m (1–30 r/min)
80.8 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 1–40 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 18000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 5000×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 100
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 2 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 110 N·m (1–30 r/min)
80.8 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 1–40 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 18000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 5000×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 100
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 3 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 110 N·m (1–30 r/min)
80.8 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 1–40 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 18000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 5000×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 100
- Rotation Direction: same direction as the motor shaft
- Electromagnetic Brake: Not Equipped
- Included Cable: 1 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 70 N·m (1–30 r/min)
63 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 1–40 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 18000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 5000×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 5.4 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 10
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 1 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 11.1 N·m (10–300 r/min)
8.1 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 460×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 200×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 10
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 2 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 11.1 N·m (10–300 r/min)
8.1 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 460×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 200×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 10
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 3 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 11.1 N·m (10–300 r/min)
8.1 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 460×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 200×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 10
- Rotation Direction: same direction as the motor shaft
- Electromagnetic Brake: Not Equipped
- Included Cable: 2 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 11.7 N·m (10–300 r/min)
8.6 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 460×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 200×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 5.4 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 10
- Rotation Direction: same direction as the motor shaft
- Electromagnetic Brake: Not Equipped
- Included Cable: 3 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 11.7 N·m (10–300 r/min)
8.6 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 460×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 200×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 5.4 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 15
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 1 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 16.6 N·m (6.7–200 r/min)
12.1 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 6.7–267 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 1000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 450×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 15
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 2 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 16.6 N·m (6.7–200 r/min)
12.1 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 6.7–267 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 1000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 450×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
- Frame Size: 104 mm
- Rated Output Power: 400 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 15
- Rotation Direction: Direction opposite to the motor (when viewed from the front)
- Electromagnetic Brake: Not Equipped
- Included Cable: 3 m
- Power Supply Input Rated Voltage: 48 VDC
- Power Supply Input Permissible Voltage Range: ±10%
- Power Supply Input Rated Input Current: 11 A
- Power Supply Input Maximum Input Current: 18 A
- Rating Torque (Motor Shaft): 1.3 N·m
- Maximum Instantaneous Torque (Motor Shaft): 1.8 N·m *1
- Permissible Torque: 16.6 N·m (6.7–200 r/min)
12.1 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 6.7–267 r/min (Speed Ratio 1: 40)
- Permissible Inertia J: 1000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 450×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% (±0.2%) *2or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% (±0 .2％) *2 or less: Conditions Rated Voltage ±10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% (±0.2%) *2or less: conditions 0~＋40°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 7.2 kg (including gearhead)
- Circuit Mass: 0.6 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
*2 The specifications are applied when the digital setting (OPX-2A or MEXE02) or the communication setting is used.
Artikel 4411 - 4440 von 16597