ORIENTAL MOTOR
Artikel 101 - 120 von 487
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 100
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 15 r/min
Three-Phase 200 VAC / 60 Hz: 18 r/min
Three-Phase 220 VAC / 60 Hz: 18 r/min
Three-Phase 230 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 2.7 N·m
Three-Phase 220 VAC / 60 Hz: 2.7 N·m
Three-Phase 230 VAC / 60 Hz: 2.7 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 12.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 120 r/min
Three-Phase 200 VAC / 60 Hz: 144 r/min
Three-Phase 220 VAC / 60 Hz: 144 r/min
Three-Phase 230 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.5 N·m
Three-Phase 200 VAC / 60 Hz: 0.42 N·m
Three-Phase 220 VAC / 60 Hz: 0.42 N·m
Three-Phase 230 VAC / 60 Hz: 0.42 N·m - Permissible Inertia J: 9.6×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 10 r/min
Three-Phase 200 VAC / 60 Hz: 12 r/min
Three-Phase 220 VAC / 60 Hz: 12 r/min
Three-Phase 230 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 100 r/min
Three-Phase 200 VAC / 60 Hz: 120 r/min
Three-Phase 220 VAC / 60 Hz: 120 r/min
Three-Phase 230 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.6 N·m
Three-Phase 200 VAC / 60 Hz: 0.5 N·m
Three-Phase 220 VAC / 60 Hz: 0.5 N·m
Three-Phase 230 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 8.3 r/min
Three-Phase 200 VAC / 60 Hz: 10 r/min
Three-Phase 220 VAC / 60 Hz: 10 r/min
Three-Phase 230 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 83 r/min
Three-Phase 200 VAC / 60 Hz: 100 r/min
Three-Phase 220 VAC / 60 Hz: 100 r/min
Three-Phase 230 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.71 N·m
Three-Phase 200 VAC / 60 Hz: 0.6 N·m
Three-Phase 220 VAC / 60 Hz: 0.6 N·m
Three-Phase 230 VAC / 60 Hz: 0.6 N·m - Permissible Inertia J: 20×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 25
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 60 r/min
Three-Phase 200 VAC / 60 Hz: 72 r/min
Three-Phase 220 VAC / 60 Hz: 72 r/min
Three-Phase 230 VAC / 60 Hz: 72 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.89 N·m
Three-Phase 200 VAC / 60 Hz: 0.75 N·m
Three-Phase 220 VAC / 60 Hz: 0.75 N·m
Three-Phase 230 VAC / 60 Hz: 0.75 N·m - Permissible Inertia J: 38×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 416 r/min
Three-Phase 200 VAC / 60 Hz: 500 r/min
Three-Phase 220 VAC / 60 Hz: 500 r/min
Three-Phase 230 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.14 N·m
Three-Phase 200 VAC / 60 Hz: 0.12 N·m
Three-Phase 220 VAC / 60 Hz: 0.12 N·m
Three-Phase 230 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 41 r/min
Three-Phase 200 VAC / 60 Hz: 50 r/min
Three-Phase 220 VAC / 60 Hz: 50 r/min
Three-Phase 230 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.3 N·m
Three-Phase 200 VAC / 60 Hz: 1.1 N·m
Three-Phase 220 VAC / 60 Hz: 1.1 N·m
Three-Phase 230 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 50
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 30 r/min
Three-Phase 200 VAC / 60 Hz: 36 r/min
Three-Phase 220 VAC / 60 Hz: 36 r/min
Three-Phase 230 VAC / 60 Hz: 36 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.6 N·m
Three-Phase 200 VAC / 60 Hz: 1.4 N·m
Three-Phase 220 VAC / 60 Hz: 1.4 N·m
Three-Phase 230 VAC / 60 Hz: 1.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 200 r/min
Three-Phase 200 VAC / 60 Hz: 240 r/min
Three-Phase 220 VAC / 60 Hz: 240 r/min
Three-Phase 230 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.3 N·m
Three-Phase 200 VAC / 60 Hz: 0.25 N·m
Three-Phase 220 VAC / 60 Hz: 0.25 N·m
Three-Phase 230 VAC / 60 Hz: 0.25 N·m - Permissible Inertia J: 3.4×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 90
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 16.6 r/min
Three-Phase 200 VAC / 60 Hz: 20 r/min
Three-Phase 220 VAC / 60 Hz: 20 r/min
Three-Phase 230 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 2.9 N·m
Three-Phase 200 VAC / 60 Hz: 2.4 N·m
Three-Phase 220 VAC / 60 Hz: 2.4 N·m
Three-Phase 230 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 166 r/min
Three-Phase 200 VAC / 60 Hz: 200 r/min
Three-Phase 220 VAC / 60 Hz: 200 r/min
Three-Phase 230 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.36 N·m
Three-Phase 200 VAC / 60 Hz: 0.3 N·m
Three-Phase 220 VAC / 60 Hz: 0.3 N·m
Three-Phase 230 VAC / 60 Hz: 0.3 N·m - Permissible Inertia J: 5×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Artikel 101 - 120 von 487