ORIENTAL MOTOR
Artikel 1 - 30 von 168
Wellenausführung:
GE: mit Ritzelwelle
Wellenausführung:
GU: mit Ritzelwelle
Alle Filter zurücksetzen
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 3.6
- Rotation Direction: same direction as the motor shaft
- Mass: 1.0 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 1.0 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 1.0 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 1.0 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 1.0 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 1.0 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Decimal gearhead (GU Gear Cutting)
- Gear Ratio: 10 (Decimal gearhead)
- für Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- für Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- für Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- für Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- für Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- für Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Schutzart IP20
- RoHS-konform
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• Description of Specification Items
• The product name written on the motor nameplate is 5IK60GE-AW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (5IK60GE-AW2U)
- Frame Size: 90 mm
- Output Power: 60 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.2 A
Single-Phase 100 VAC / 60 Hz / 1.19 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 320 mN·m
Single-Phase 100 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH200CFAUL2, Capacity: 20 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 60 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 60 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 5IK60GE-CW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (5IK60GE-CW2E)
- Frame Size: 90 mm
- Output Power: 60 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.57 A
Single-Phase 200 VAC / 60 Hz / 0.65 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 320 mN·m
Single-Phase 200 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH50BFAUL, Capacity: 5 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 60 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 90 mm
- Shaft/Gear Type: Decimal gearhead (GU Gear Cutting)
- Gear Ratio: 10 (Decimal gearhead)
- Mass: 0.6 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 12.5
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 15
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GU-KB Gearhead
- Gear Ratio: 18
- Rotation Direction: opposite direction as the motor
- Mass: 1.3 kg
• The product name written on the motor nameplate is 5IK60GU-AW. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (5IK60GU-AWU)
- Frame Size: 90 mm
- Output Power: 60 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.2 A
Single-Phase 100 VAC / 60 Hz / 1.19 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 320 mN·m
Single-Phase 100 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH200CFAUL2, Capacity: 20 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is 5IK60GU-AW. The suffix of the product name above indicates the type of capacitor.
U: Single-phase 110 VAC/115 VAC capacitor included (this product)
J: Single-phase 100 VAC capacitor included. (5IK60GU-AWJ)
- Frame Size: 90 mm
- Output Power: 60 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 1.09 A
Single-Phase 115 VAC / 60 Hz / 1.1 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 320 mN·m
Single-Phase 115 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 405 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Capacity: 18 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is 5IK60GU-CW. The suffix of the product name above indicates the type of capacitor.
E: Single-phase 220 VAC/230 VAC capacitor included (this product)
J: Single-phase 200 VAC capacitor included. (5IK60GU-CWJ)
- Frame Size: 90 mm
- Output Power: 60 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.55 A
Single-Phase 220 VAC / 60 Hz / 0.54 A
Single-Phase 230 VAC / 50 Hz / 0.57 A
Single-Phase 230 VAC / 60 Hz / 0.54 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 320 mN·m
Single-Phase 220 VAC / 60 Hz: 320 mN·m
Single-Phase 230 VAC / 50 Hz: 320 mN·m
Single-Phase 230 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 220 VAC / 60 Hz: 405 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is 5IK60GU-CW. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (5IK60GU-CWE)
- Frame Size: 90 mm
- Output Power: 60 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.57 A
Single-Phase 200 VAC / 60 Hz / 0.65 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 320 mN·m
Single-Phase 200 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 490 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 405 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH50BFAUL, Capacity: 5 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 60 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Artikel 1 - 30 von 168