ORIENTAL MOTOR
Artikel 331 - 360 von 452
Wellenausführung:
A: Motor ohne Getriebe
Wellenausführung:
GU: mit Ritzelwelle
Alle Filter zurücksetzen
• Description of Specification Items
- Frame Size: 90 mm
- Output Power: 60 W
- Series: KIIS Series
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 220 VAC / 50 Hz / 0.37 A
Three-Phase 220 VAC / 60 Hz / 0.33 A
Three-Phase 230 VAC VAC / 50 Hz / 0.38 A
Three-Phase 230 VAC VAC / 60 Hz / 0.33 A - Starting Torque (Motor Shaft): Three-Phase 220 VAC / 50 Hz: 600 mN·m
Three-Phase 220 VAC / 60 Hz: 500 mN·m
Three-Phase 230 VAC VAC / 50 Hz: 600 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 500 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 220 VAC / 50 Hz: 410 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 350 mN·m / 1670 r/min
Three-Phase 230 VAC VAC / 50 Hz: 410 mN·m / 1400 r/min
Three-Phase 230 VAC VAC / 60 Hz: 350 mN·m / 1670 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.04 A / 6 W
Single-Phase 220 VAC / 60 Hz / 0.04 A / 6 W
Single-Phase 230 VAC VAC / 50 Hz / 0.04 A / 6 W
Single-Phase 230 VAC VAC / 60 Hz / 0.04 A / 6 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 500 mN·m
- Motor Section Mass: 3.3 kg
[Note]
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
- Frame Size: 90 mm
- Output Power: 60 W
- Series: KIIS Series
- Type: Cable Type
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.40 A
Three-Phase 200 VAC / 60 Hz / 0.35 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 600 mN·m
Three-Phase 200 VAC / 60 Hz: 500 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 410 mN·m / 1400 r/min
Three-Phase 200 VAC / 60 Hz: 350 mN·m / 1680 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.04 A / 6 W
Single-Phase 200 VAC / 60 Hz / 0.04 A / 6 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 500 mN·m
- Motor Section Mass: 3.0 kg
[Note]
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
- Frame Size: 90 mm
- Output Power: 60 W
- Series: KIIS Series
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.40 A
Three-Phase 200 VAC / 60 Hz / 0.35 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 600 mN·m
Three-Phase 200 VAC / 60 Hz: 500 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 410 mN·m / 1400 r/min
Three-Phase 200 VAC / 60 Hz: 350 mN·m / 1680 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.04 A / 6 W
Single-Phase 200 VAC / 60 Hz / 0.04 A / 6 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 500 mN·m
- Motor Section Mass: 3.3 kg
[Note]
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
• The product name written on the motor nameplate is 5IK90A-AW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (5IK90A-AW2U)
- Frame Size: 90 mm
- Output Power: 90 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.64 A
Single-Phase 100 VAC / 60 Hz / 1.67 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 450 mN·m
Single-Phase 100 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 700 mN·m / 1250 r/min
Single-Phase 100 VAC / 60 Hz: 585 mN·m / 1500 r/min - Capacitor: Product name: CH280CFAUL2, Capacity: 28 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.2 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is 5IK90A-AW2T. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (5IK90A-AW2TU)
- Frame Size: 90 mm
- Output Power: 90 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.64 A
Single-Phase 100 VAC / 60 Hz / 1.67 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 450 mN·m
Single-Phase 100 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 700 mN·m / 1250 r/min
Single-Phase 100 VAC / 60 Hz: 585 mN·m / 1500 r/min - Capacitor: Product name: CH280CFAUL2, Capacity: 28 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 90 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 90 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 5IK90A-BW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (5IK90A-BW2U)
- Frame Size: 90 mm
- Output Power: 90 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.57 A
Single-Phase 100 VAC / 60 Hz / 1.85 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 240 mN·m
Single-Phase 100 VAC / 60 Hz: 240 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 330 mN·m / 2650 r/min
Single-Phase 100 VAC / 60 Hz: 280 mN·m / 3200 r/min - Capacitor: Product name: CH280CFAUL2, Capacity: 28 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 90 W
- Drehzahl 50 Hz: 3000 min-1, 60 Hz: 3600
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
- Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 90 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 90 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 5IK90A-CW2T. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (5IK90A-CW2TE)
- Frame Size: 90 mm
- Output Power: 90 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.8 A
Single-Phase 200 VAC / 60 Hz / 0.93 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 450 mN·m
Single-Phase 200 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 730 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 605 mN·m / 1450 r/min - Capacitor: Product name: CH70BFAUL, Capacity: 7 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 90 W
- Drehzahl 50 Hz: 3000 min-1, 60 Hz: 3600
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
- Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 90 mm
- Output Power: 90 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.74 A
Single-Phase 220 VAC / 60 Hz / 0.82 A
Single-Phase 230 VAC / 50 Hz / 0.76 A
Single-Phase 230 VAC / 60 Hz / 0.81 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 450 mN·m
Single-Phase 220 VAC / 60 Hz: 450 mN·m
Single-Phase 230 VAC / 50 Hz: 450 mN·m
Single-Phase 230 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 730 mN·m / 1200 r/min
Single-Phase 220 VAC / 60 Hz: 605 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 730 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 605 mN·m / 1450 r/min - Capacitor: Product name: CH60BFAUL, Capacity: 6.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.2 kg
- Frame Size: 90 mm
- Output Power: 90 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.74 A
Single-Phase 220 VAC / 60 Hz / 0.82 A
Single-Phase 230 VAC / 50 Hz / 0.76 A
Single-Phase 230 VAC / 60 Hz / 0.81 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 450 mN·m
Single-Phase 220 VAC / 60 Hz: 450 mN·m
Single-Phase 230 VAC / 50 Hz: 450 mN·m
Single-Phase 230 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 730 mN·m / 1200 r/min
Single-Phase 220 VAC / 60 Hz: 605 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 730 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 605 mN·m / 1450 r/min - Capacitor: Product name: CH60BFAUL, Capacity: 6.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.5 kg
- Frame Size: 90 mm
- Output Power: 90 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.5 A
Single-Phase 100 VAC / 60 Hz / 1.55 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 450 mN·m
Single-Phase 100 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 680 mN·m / 1300 r/min
Single-Phase 100 VAC / 60 Hz: 570 mN·m / 1550 r/min - Capacitor: Product name: CH250CFAUL2, Capacity: 25 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.2 kg
- Frame Size: 90 mm
- Output Power: 90 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 1.5 A
Single-Phase 100 VAC / 60 Hz / 1.55 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 450 mN·m
Single-Phase 100 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 680 mN·m / 1300 r/min
Single-Phase 100 VAC / 60 Hz: 570 mN·m / 1550 r/min - Capacitor: Product name: CH250CFAUL2, Capacity: 25 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.5 kg
- Frame Size: 90 mm
- Output Power: 90 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.73 A
Single-Phase 200 VAC / 60 Hz / 0.77 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 450 mN·m
Single-Phase 200 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 680 mN·m / 1300 r/min
Single-Phase 200 VAC / 60 Hz: 570 mN·m / 1550 r/min - Capacitor: Product name: CH60BFAUL, Capacity: 6.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.2 kg
- Frame Size: 90 mm
- Output Power: 90 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.73 A
Single-Phase 200 VAC / 60 Hz / 0.77 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 450 mN·m
Single-Phase 200 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 680 mN·m / 1300 r/min
Single-Phase 200 VAC / 60 Hz: 570 mN·m / 1550 r/min - Capacitor: Product name: CH60BFAUL, Capacity: 6.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.5 kg
- Ausgangsleistung: 90 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 90 W
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Drehzahl: 1500 min-1
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 90 W
- Drehzahl 50 Hz: 3000 min-1, 60 Hz: 3600
- Motor-Rahmengröße: 90 mm
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
- Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 90 mm
- Output Power: 90 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 1.44 A
Single-Phase 115 VAC / 60 Hz / 1.44 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 450 mN·m
Single-Phase 115 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 585 mN·m / 1500 r/min
Single-Phase 115 VAC / 60 Hz: 585 mN·m / 1500 r/min - Capacitor: Product name: CH200CFAUL2, Capacity: 20 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.2 kg
- Frame Size: 90 mm
- Output Power: 90 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 1.44 A
Single-Phase 115 VAC / 60 Hz / 1.44 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 450 mN·m
Single-Phase 115 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 585 mN·m / 1500 r/min
Single-Phase 115 VAC / 60 Hz: 585 mN·m / 1500 r/min - Capacitor: Product name: CH200CFAUL2, Capacity: 20 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 3.5 kg
Artikel 331 - 360 von 452