ORIENTAL MOTOR
Artikel 1 - 50 von 246
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 167 r/min
Three-Phase 200 VAC / 60 Hz: 200 r/min
Three-Phase 220 VAC / 60 Hz: 200 r/min
Three-Phase 230 VAC VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.36 N·m
Three-Phase 200 VAC / 60 Hz: 0.3 N·m
Three-Phase 220 VAC / 60 Hz: 0.3 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 5×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 200 r/min
Three-Phase 200 VAC / 60 Hz: 240 r/min
Three-Phase 220 VAC / 60 Hz: 240 r/min
Three-Phase 230 VAC VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.3 N·m
Three-Phase 200 VAC / 60 Hz: 0.25 N·m
Three-Phase 220 VAC / 60 Hz: 0.25 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.25 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 3.4×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 300 r/min
Three-Phase 200 VAC / 60 Hz: 360 r/min
Three-Phase 220 VAC / 60 Hz: 360 r/min
Three-Phase 230 VAC VAC / 60 Hz: 360 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.2 N·m
Three-Phase 200 VAC / 60 Hz: 0.17 N·m
Three-Phase 220 VAC / 60 Hz: 0.17 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.17 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 1.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 50
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 30 r/min
Three-Phase 200 VAC / 60 Hz: 36 r/min
Three-Phase 220 VAC / 60 Hz: 36 r/min
Three-Phase 230 VAC VAC / 60 Hz: 36 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.6 N·m
Three-Phase 200 VAC / 60 Hz: 1.4 N·m
Three-Phase 220 VAC / 60 Hz: 1.4 N·m
Three-Phase 230 VAC VAC / 60 Hz: 1.4 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 500 r/min
Three-Phase 200 VAC / 60 Hz: 600 r/min
Three-Phase 220 VAC / 60 Hz: 600 r/min
Three-Phase 230 VAC VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.12 N·m
Three-Phase 200 VAC / 60 Hz: 0.1 N·m
Three-Phase 220 VAC / 60 Hz: 0.1 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.1 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 0.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 50 r/min
Three-Phase 200 VAC / 60 Hz: 60 r/min
Three-Phase 220 VAC / 60 Hz: 60 r/min
Three-Phase 230 VAC VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.1 N·m
Three-Phase 200 VAC / 60 Hz: 0.9 N·m
Three-Phase 220 VAC / 60 Hz: 0.9 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.9 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 417 r/min
Three-Phase 200 VAC / 60 Hz: 500 r/min
Three-Phase 220 VAC / 60 Hz: 500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.14 N·m
Three-Phase 200 VAC / 60 Hz: 0.12 N·m
Three-Phase 220 VAC / 60 Hz: 0.12 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.12 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 0.8×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 83 r/min
Three-Phase 200 VAC / 60 Hz: 100 r/min
Three-Phase 220 VAC / 60 Hz: 100 r/min
Three-Phase 230 VAC VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.71 N·m
Three-Phase 200 VAC / 60 Hz: 0.6 N·m
Three-Phase 220 VAC / 60 Hz: 0.6 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 20×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 8.3 r/min
Three-Phase 200 VAC / 60 Hz: 10 r/min
Three-Phase 220 VAC / 60 Hz: 10 r/min
Three-Phase 230 VAC VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 100 r/min
Three-Phase 200 VAC / 60 Hz: 120 r/min
Three-Phase 220 VAC / 60 Hz: 120 r/min
Three-Phase 230 VAC VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.6 N·m
Three-Phase 200 VAC / 60 Hz: 0.5 N·m
Three-Phase 220 VAC / 60 Hz: 0.5 N·m
Three-Phase 230 VAC VAC / 60 Hz: 0.5 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 10 r/min
Three-Phase 200 VAC / 60 Hz: 12 r/min
Three-Phase 220 VAC / 60 Hz: 12 r/min
Three-Phase 230 VAC VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 166 r/min
Three-Phase 200 VAC / 60 Hz: 200 r/min
Three-Phase 220 VAC / 60 Hz: 200 r/min
Three-Phase 230 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.36 N·m
Three-Phase 200 VAC / 60 Hz: 0.3 N·m
Three-Phase 220 VAC / 60 Hz: 0.3 N·m
Three-Phase 230 VAC / 60 Hz: 0.3 N·m - Permissible Inertia J: 5×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 90
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 16.6 r/min
Three-Phase 200 VAC / 60 Hz: 20 r/min
Three-Phase 220 VAC / 60 Hz: 20 r/min
Three-Phase 230 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 2.9 N·m
Three-Phase 200 VAC / 60 Hz: 2.4 N·m
Three-Phase 220 VAC / 60 Hz: 2.4 N·m
Three-Phase 230 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 200 r/min
Three-Phase 200 VAC / 60 Hz: 240 r/min
Three-Phase 220 VAC / 60 Hz: 240 r/min
Three-Phase 230 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.3 N·m
Three-Phase 200 VAC / 60 Hz: 0.25 N·m
Three-Phase 220 VAC / 60 Hz: 0.25 N·m
Three-Phase 230 VAC / 60 Hz: 0.25 N·m - Permissible Inertia J: 3.4×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 50
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 30 r/min
Three-Phase 200 VAC / 60 Hz: 36 r/min
Three-Phase 220 VAC / 60 Hz: 36 r/min
Three-Phase 230 VAC / 60 Hz: 36 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.6 N·m
Three-Phase 200 VAC / 60 Hz: 1.4 N·m
Three-Phase 220 VAC / 60 Hz: 1.4 N·m
Three-Phase 230 VAC / 60 Hz: 1.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 41 r/min
Three-Phase 200 VAC / 60 Hz: 50 r/min
Three-Phase 220 VAC / 60 Hz: 50 r/min
Three-Phase 230 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.3 N·m
Three-Phase 200 VAC / 60 Hz: 1.1 N·m
Three-Phase 220 VAC / 60 Hz: 1.1 N·m
Three-Phase 230 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 416 r/min
Three-Phase 200 VAC / 60 Hz: 500 r/min
Three-Phase 220 VAC / 60 Hz: 500 r/min
Three-Phase 230 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.14 N·m
Three-Phase 200 VAC / 60 Hz: 0.12 N·m
Three-Phase 220 VAC / 60 Hz: 0.12 N·m
Three-Phase 230 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 25
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 60 r/min
Three-Phase 200 VAC / 60 Hz: 72 r/min
Three-Phase 220 VAC / 60 Hz: 72 r/min
Three-Phase 230 VAC / 60 Hz: 72 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.89 N·m
Three-Phase 200 VAC / 60 Hz: 0.75 N·m
Three-Phase 220 VAC / 60 Hz: 0.75 N·m
Three-Phase 230 VAC / 60 Hz: 0.75 N·m - Permissible Inertia J: 38×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 83 r/min
Three-Phase 200 VAC / 60 Hz: 100 r/min
Three-Phase 220 VAC / 60 Hz: 100 r/min
Three-Phase 230 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.71 N·m
Three-Phase 200 VAC / 60 Hz: 0.6 N·m
Three-Phase 220 VAC / 60 Hz: 0.6 N·m
Three-Phase 230 VAC / 60 Hz: 0.6 N·m - Permissible Inertia J: 20×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 8.3 r/min
Three-Phase 200 VAC / 60 Hz: 10 r/min
Three-Phase 220 VAC / 60 Hz: 10 r/min
Three-Phase 230 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 100 r/min
Three-Phase 200 VAC / 60 Hz: 120 r/min
Three-Phase 220 VAC / 60 Hz: 120 r/min
Three-Phase 230 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.6 N·m
Three-Phase 200 VAC / 60 Hz: 0.5 N·m
Three-Phase 220 VAC / 60 Hz: 0.5 N·m
Three-Phase 230 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 10 r/min
Three-Phase 200 VAC / 60 Hz: 12 r/min
Three-Phase 220 VAC / 60 Hz: 12 r/min
Three-Phase 230 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 12.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 120 r/min
Three-Phase 200 VAC / 60 Hz: 144 r/min
Three-Phase 220 VAC / 60 Hz: 144 r/min
Three-Phase 230 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 0.5 N·m
Three-Phase 200 VAC / 60 Hz: 0.42 N·m
Three-Phase 220 VAC / 60 Hz: 0.42 N·m
Three-Phase 230 VAC / 60 Hz: 0.42 N·m - Permissible Inertia J: 9.6×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 100
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Three-Phase 200 VAC / 50 Hz: 15 r/min
Three-Phase 200 VAC / 60 Hz: 18 r/min
Three-Phase 220 VAC / 60 Hz: 18 r/min
Three-Phase 230 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 2.7 N·m
Three-Phase 220 VAC / 60 Hz: 2.7 N·m
Three-Phase 230 VAC / 60 Hz: 2.7 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
The Product Name Listed on the Motor Nameplate: 2IK6RGN-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
E: Single-phase 220/230 VAC capacitors are included. (Products)
J: Single-phase 200 VAC capacitor is Included. (2IK6RGN-CW2J)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH06BFAUL, Capacitance: 0.6 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: Single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
The Product Name Listed on the Motor Nameplate: 2IK6RGN-AW2
The product name is suffixed with a symbol indicating the type of capacitor.
J: Single-phase 100 VAC capacitor is included. (Products)
U: Capacitor for single-phase 110/115 VAC Is Included. (2IK6RGN-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
The Product Name Listed on the Motor Nameplate: 2IK6RA-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
E: Single-phase 220/230 VAC capacitors are included. (Products)
J: Single-phase 200 VAC capacitor is Included. (2IK6RA-CW2J)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Round Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH06BFAUL, Capacitance: 0.6 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: Single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.185 A
Single-Phase 115 VAC / 60 Hz / 0.189 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 40 mN·m
Single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - Capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.102 A
Single-Phase 200 VAC / 60 Hz / 0.100 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 40 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - Capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Mass: 0.7 kg
Artikel 1 - 50 von 246