ORIENTAL MOTOR
Artikel 51 - 100 von 522
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• Description of Specification Items
• The product name written on the motor nameplate is 2IK6A-CW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2IK6A-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.103 A
Single-Phase 220 VAC / 60 Hz / 0.091 A
Single-Phase 230 VAC / 50 Hz / 0.107 A
Single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 38 mN·m
Single-Phase 220 VAC / 60 Hz: 40 mN·m
Single-Phase 230 VAC / 50 Hz: 45 mN·m
Single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - Capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.189 A
Single-Phase 100 VAC / 60 Hz / 0.192 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 40 mN·m / 1450 r/min - Capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.097 A
Single-Phase 200 VAC / 60 Hz / 0.096 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 40 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - Capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.179 A
Single-Phase 115 VAC / 60 Hz / 0.184 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 40 mN·m
Single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - Capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 10 r/min
Single-Phase 100 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 100 r/min
Single-Phase 100 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.6 N·m
Single-Phase 100 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 8.3 r/min
Single-Phase 100 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 416 r/min
Single-Phase 100 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.14 N·m
Single-Phase 100 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 50 r/min
Single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.1 N·m
Single-Phase 100 VAC / 60 Hz: 0.9 N·m - Permissible Inertia J: 55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 41 r/min
Single-Phase 100 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.3 N·m
Single-Phase 100 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 500 r/min
Single-Phase 100 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.12 N·m
Single-Phase 100 VAC / 60 Hz: 0.1 N·m - Permissible Inertia J: 0.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 60
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 25 r/min
Single-Phase 100 VAC / 60 Hz: 30 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.9 N·m
Single-Phase 100 VAC / 60 Hz: 1.6 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 250 r/min
Single-Phase 100 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.24 N·m
Single-Phase 100 VAC / 60 Hz: 0.2 N·m - Permissible Inertia J: 2.2×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 200 r/min
Single-Phase 100 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.3 N·m
Single-Phase 100 VAC / 60 Hz: 0.25 N·m - Permissible Inertia J: 3.4×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 90
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 16.6 r/min
Single-Phase 100 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 2.9 N·m
Single-Phase 100 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2GN100S(Gearhead)
2IK6GN-CW2BJ(Motor)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 100 r/min
Single-Phase 200 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.6 N·m
Single-Phase 200 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 83 r/min
Single-Phase 200 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.71 N·m
Single-Phase 200 VAC / 60 Hz: 0.6 N·m - Permissible Inertia J: 20×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 25
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 60 r/min
Single-Phase 200 VAC / 60 Hz: 72 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.89 N·m
Single-Phase 200 VAC / 60 Hz: 0.75 N·m - Permissible Inertia J: 38×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 41 r/min
Single-Phase 200 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.3 N·m
Single-Phase 200 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 500 r/min
Single-Phase 200 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.12 N·m
Single-Phase 200 VAC / 60 Hz: 0.1 N·m - Permissible Inertia J: 0.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 50
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 30 r/min
Single-Phase 200 VAC / 60 Hz: 36 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 1.6 N·m
Single-Phase 200 VAC / 60 Hz: 1.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 300 r/min
Single-Phase 200 VAC / 60 Hz: 360 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.2 N·m
Single-Phase 200 VAC / 60 Hz: 0.17 N·m - Permissible Inertia J: 1.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 250 r/min
Single-Phase 200 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.24 N·m
Single-Phase 200 VAC / 60 Hz: 0.2 N·m - Permissible Inertia J: 2.2×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 166 r/min
Single-Phase 200 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.36 N·m
Single-Phase 200 VAC / 60 Hz: 0.3 N·m - Permissible Inertia J: 5×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Artikel 51 - 100 von 522