ORIENTAL MOTOR
Artikel 21 - 40 von 917
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 416 r/min
Single-Phase 100 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.14 N·m
Single-Phase 100 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 50 r/min
Single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.1 N·m
Single-Phase 100 VAC / 60 Hz: 0.9 N·m - Permissible Inertia J: 55×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 41 r/min
Single-Phase 100 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.3 N·m
Single-Phase 100 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 500 r/min
Single-Phase 100 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.12 N·m
Single-Phase 100 VAC / 60 Hz: 0.1 N·m - Permissible Inertia J: 0.55×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 60
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 25 r/min
Single-Phase 100 VAC / 60 Hz: 30 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.9 N·m
Single-Phase 100 VAC / 60 Hz: 1.6 N·m - Permissible Inertia J: 155×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 250 r/min
Single-Phase 100 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.24 N·m
Single-Phase 100 VAC / 60 Hz: 0.2 N·m - Permissible Inertia J: 2.2×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 200 r/min
Single-Phase 100 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.3 N·m
Single-Phase 100 VAC / 60 Hz: 0.25 N·m - Permissible Inertia J: 3.4×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 90
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 16.6 r/min
Single-Phase 100 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 2.9 N·m
Single-Phase 100 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 155×10⁻⁴ kg·m²
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2GN100S(Gearhead)
2IK6GN-CW2BJ(Motor)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 100 r/min
Single-Phase 200 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.6 N·m
Single-Phase 200 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10⁻⁴ kg·m²
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.1 A
Single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 45 mN·m
Single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 83 r/min
Single-Phase 200 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.71 N·m
Single-Phase 200 VAC / 60 Hz: 0.6 N·m - Permissible Inertia J: 20×10⁻⁴ kg·m²
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Artikel 21 - 40 von 917