ORIENTAL MOTOR
Artikel 1 - 10 von 11
Stromversorgung:
AC Input
Motorausrichtung:
Gerade
Maximale Geschwindigkeit:
200 mm/s
Alle Filter zurücksetzen
Description of Specification Items
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~86 N
- Push Force: 200 N
- Holding Force: 140 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 3.5 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR Series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~86 N
- Push Force: 200 N
- Holding Force: 140 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 3.6 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 5.0 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR Series
- Equipped Motor Product Name: ARM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~14 kg
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 200 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 5.2 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 800 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 7.6 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 800 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 8.0 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR Series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 5.0 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR Series
- Equipped Motor Product Name: ARM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~14 kg
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 200 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 5.2 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 700 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~14 kg
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 200 mm/s
- Actuator part Mass: 5.1 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR Series
- Equipped Motor Product Name: ARM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 800 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 200 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 7.9 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
Artikel 1 - 10 von 11