ORIENTAL MOTOR
Artikel 61 - 80 von 1119
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.179 A
Single-Phase 115 VAC / 60 Hz / 0.184 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 40 mN·m
Single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - Capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 10 r/min
Single-Phase 100 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 100 r/min
Single-Phase 100 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.6 N·m
Single-Phase 100 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 8.3 r/min
Single-Phase 100 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 416 r/min
Single-Phase 100 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.14 N·m
Single-Phase 100 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 50 r/min
Single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.1 N·m
Single-Phase 100 VAC / 60 Hz: 0.9 N·m - Permissible Inertia J: 55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 36
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 41 r/min
Single-Phase 100 VAC / 60 Hz: 50 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.3 N·m
Single-Phase 100 VAC / 60 Hz: 1.1 N·m - Permissible Inertia J: 80×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 500 r/min
Single-Phase 100 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.12 N·m
Single-Phase 100 VAC / 60 Hz: 0.1 N·m - Permissible Inertia J: 0.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 60
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 25 r/min
Single-Phase 100 VAC / 60 Hz: 30 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.9 N·m
Single-Phase 100 VAC / 60 Hz: 1.6 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 250 r/min
Single-Phase 100 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.24 N·m
Single-Phase 100 VAC / 60 Hz: 0.2 N·m - Permissible Inertia J: 2.2×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 200 r/min
Single-Phase 100 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.3 N·m
Single-Phase 100 VAC / 60 Hz: 0.25 N·m - Permissible Inertia J: 3.4×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 90
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.199 A
Single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 45 mN·m
Single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 16.6 r/min
Single-Phase 100 VAC / 60 Hz: 20 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 2.9 N·m
Single-Phase 100 VAC / 60 Hz: 2.4 N·m - Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Artikel 61 - 80 von 1119