ORIENTAL MOTOR
Artikel 1 - 50 von 179
Drehzahl:
1500 min⁻¹
Wellenausführung:
GN: mit Ritzelwelle
Wellenausführung:
GU: mit Ritzelwelle
Alle Filter zurücksetzen
• Description of Specification Items
• The product name written on the motor nameplate is 0RK1GN-AW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.12 A
Single-Phase 100 VAC / 60 Hz / 0.125 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 8 mN·m
Single-Phase 100 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 10 mN·m / 1000 r/min
Single-Phase 100 VAC / 60 Hz: 8 mN·m / 1200 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH18FAUL, Capacity: 1.8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 0RK1GN-AW3. The suffix (U) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.09 A
Single-Phase 115 VAC / 60 Hz / 0.095 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 8 mN·m
Single-Phase 115 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 8 mN·m / 1200 r/min
Single-Phase 115 VAC / 60 Hz: 8 mN·m / 1200 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH12FAUL, Capacity: 1.2 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 0RK1GN-CW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.066 A
Single-Phase 200 VAC / 60 Hz / 0.069 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 8 mN·m
Single-Phase 200 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 10 mN·m / 1000 r/min
Single-Phase 200 VAC / 60 Hz: 8 mN·m / 1200 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2IK6GN-AW2B. The suffix of the product name above indicates the type of capacitor.
U: Single-phase 110 VAC/115 VAC capacitor included (this product)
J: Single-phase 100 VAC capacitor included. (2IK6GN-AW2BJ)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.178 A
Single-Phase 115 VAC / 60 Hz / 0.182 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 40 mN·m
Single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 2IK6GN-CW2B. The suffix of the product name above indicates the type of capacitor.
E: Single-phase 220 VAC/230 VAC capacitor included (this product)
J: Single-phase 200 VAC capacitor included. (2IK6GN-CW2BJ)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.103 A
Single-Phase 220 VAC / 60 Hz / 0.091 A
Single-Phase 230 VAC / 50 Hz / 0.107 A
Single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 38 mN·m
Single-Phase 220 VAC / 60 Hz: 40 mN·m
Single-Phase 230 VAC / 50 Hz: 45 mN·m
Single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (E) that indicates the type of capacitor.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
The Product Name Listed on the Motor Nameplate: 2IK6RGN-AW2
The product name is suffixed with a symbol indicating the type of capacitor.
J: Single-phase 100 VAC capacitor is included. (Products)
U: Capacitor for single-phase 110/115 VAC Is Included. (2IK6RGN-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
The Product Name Listed on the Motor Nameplate: 2IK6RGN-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
E: Single-phase 220/230 VAC capacitors are included. (Products)
J: Single-phase 200 VAC capacitor is Included. (2IK6RGN-CW2J)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: Speed Control Motor, Induction Motor
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH06BFAUL, Capacitance: 0.6 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: Single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
• The product name written on the motor nameplate is 2RK6GN-AW2B. The suffix of the product name above indicates the type of capacitor.
U: Single-phase 110 VAC/115 VAC capacitor included (this product)
J: Single-phase 100 VAC capacitor included. (2RK6GN-AW2BJ)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.251 A
Single-Phase 115 VAC / 60 Hz / 0.256 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 45 mN·m
Single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2RK6GN-AW2M. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (2RK6GN-AW2MU)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.113 A
Single-Phase 220 VAC / 60 Hz / 0.117 A
Single-Phase 230 VAC / 50 Hz / 0.117 A
Single-Phase 230 VAC / 60 Hz / 0.12 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 45 mN·m
Single-Phase 220 VAC / 60 Hz: 45 mN·m
Single-Phase 230 VAC / 50 Hz: 50 mN·m
Single-Phase 230 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: 組合せるギヤヘッドによって異なります。
- Permissible Torque of Gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.12 A
Single-Phase 200 VAC / 60 Hz / 0.138 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: 組合せるギヤヘッドによって異なります。
- Permissible Torque of Gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 2RK6GN-CW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2RK6GN-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.12 A
Single-Phase 200 VAC / 60 Hz / 0.138 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2RK6GN-CW2MB. The suffix of the product name above indicates the type of capacitor.
E: Single-phase 220 VAC/230 VAC capacitor included (this product)
J: Single-phase 200 VAC capacitor included. (2RK6GN-CW2MBJ)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 0.107 A
Single-Phase 220 VAC / 60 Hz / 0.109 A
Single-Phase 230 VAC / 50 Hz / 0.112 A
Single-Phase 230 VAC / 60 Hz / 0.113 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 50 mN·m
Single-Phase 220 VAC / 60 Hz: 45 mN·m
Single-Phase 230 VAC / 50 Hz: 50 mN·m
Single-Phase 230 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
Single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
Single-Phase 230 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 230 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (E) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
• The product name written on the motor nameplate is 2RK6GN-CW2MB. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2RK6GN-CW2MBE)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.113 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
The Product Name Listed on the Motor Nameplate: 2RK6RGN-AW2
The product name is suffixed with a symbol indicating the type of capacitor.
J: Single-phase 100 VAC capacitor is included. (Products)
U: Capacitor for single-phase 110/115 VAC Is Included. (2RK6RGN-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: 30 Minutes
- Motor Type: Speed Control Motor, Reversible Type
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH45FAUL2, Capacitance: 4.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
The Product Name Listed on the Motor Nameplate: 2RK6RGN-AW2
The product name is suffixed with a symbol indicating the type of capacitor.
U: Capacitor for single-phase 110/115 VAC Is Included (Products)
J: Single-phase 100 VAC capacitor is Included. (2RK6RGN-AW2J)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: 30 Minutes
- Motor Type: Speed Control Motor, Reversible Type
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: Single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Impedance protected
The Product Name Listed on the Motor Nameplate: 2RK6RGN-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
E: Single-phase 220/230 VAC capacitors are included. (Products)
J: Single-phase 200 VAC capacitor is Included. (2RK6RGN-CW2J)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: 30 Minutes
- Motor Type: Speed Control Motor, Reversible Type
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH08BFAUL, Capacitance: 0.8 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: Single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
The Product Name Listed on the Motor Nameplate: 2RK6RGN-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
J: Single-phase 200 VAC capacitor is included. (This product)
E: Single-phase 220/230 VAC capacitors are Included. (2RK6RGN-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: 30 Minutes
- Motor Type: Speed Control Motor, Reversible Type
- Shaft/Gear Type: Pinion Shaft Type
- Type: Lead Wire Type
- Capacitor: Product Name: CH10BFAUL, Capacitance: 1.0 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: Single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
• The product name written on the motor nameplate is 3IK15GN-AW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (3IK15GN-AW2U)
- Frame Size: 70 mm
- Output Power: 15 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.36 A
Single-Phase 100 VAC / 60 Hz / 0.37 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 80 mN·m
Single-Phase 100 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 125 mN·m / 1200 r/min
Single-Phase 100 VAC / 60 Hz: 105 mN·m / 1450 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH55FAUL2, Capacity: 5.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Ausgangsleistung: 15 W
- Motor-Rahmengröße: 70 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 70 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 15 W
- Motor-Rahmengröße: 70 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 70 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
Artikel 1 - 50 von 179