ORIENTAL MOTOR
Artikel 61 - 70 von 80
Description of Specification Items
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~14 kg
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 2.6 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ Series
- Equipped Motor Product Name: AZM46MK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~14 kg
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 2.6 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
Artikel 61 - 70 von 80