Motor
Artikel 1 - 30 von 708
- Frame Size: 90 mm
- Rated Output Power: 120 W
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Rotation Direction: Depends on the combination gear head.
- Electromagnetic Brake: Not Equipped
- Motor Type: Connector Type
- Rotor Inertia J: 0.23×10-4 kg·m2
BLS-Serie, bürstenloser DC-Motor, 24 VDC, IP40, GE-Ritzelwelle für 5GE-Getriebe, 100–2000 U/min; ohne Treiber und Anschlusskabel.
- Frame Size: 90 mm
- Rated Output Power: 90 W
- Shaft/Gear Type: Pinion Shaft Type
- Rotor Inertia J: 0.62×10-4 kg·m2
Description of Specification Items.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 100
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 6 N·m (0.8–30 r/min)
5.4 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.8–40 r/min
- Permissible Inertia J: 2500×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 10
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 0.85 N·m (8–300 r/min)
0.64 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 8–400 r/min
- Permissible Inertia J: 50×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 6.2×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 15
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.4 N·m (5.3–200 r/min)
1.0 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 5.3–267 r/min
- Permissible Inertia J: 110×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 14×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 200
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 17 N·m (0.4–15 r/min)
12.8 N·m (20 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.4–20 r/min
- Permissible Inertia J: 5000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 20
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.7 N·m (4–150 r/min)
1.3 N·m (200 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 4–200 r/min
- Permissible Inertia J: 200×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 24.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 30
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 2.6 N·m (2.7–100 r/min)
1.9 N·m (133 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 2.7–133 r/min
- Permissible Inertia J: 370×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 55.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 5
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 0.4 N·m (16–600 r/min)
0.3 N·m (800 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 16–800 r/min
- Permissible Inertia J: 12×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 1.55×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: -
- Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 80–4000 r/min
- Permissible Inertia J: 1.8×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 1.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 10
- Electromagnetic Brake: Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 0.90 N·m (10–300 r/min)
0.68 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min
- Permissible Inertia J: 50×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 6.2×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.1 N·m
- Motor Section Mass: 0.9 kg
- Gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 Do not start or stop the product by turning the power ON/OFF as this will cause abnormal friction in the electromagnetic brake.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 200
- Electromagnetic Brake: Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 6 N·m (0.5–15 r/min)
5.4 N·m (20 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.5–20 r/min
- Permissible Inertia J: 5000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.1 N·m
- Motor Section Mass: 0.9 kg
- Gearhead Mass: 0.38 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 Do not start or stop the product by turning the power ON/OFF as this will cause abnormal friction in the electromagnetic brake.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 20
- Electromagnetic Brake: Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.7 N·m (5–150 r/min)
1.3 N·m (200 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 5–200 r/min
- Permissible Inertia J: 200×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 24.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.1 N·m
- Motor Section Mass: 0.9 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 Do not start or stop the product by turning the power ON/OFF as this will cause abnormal friction in the electromagnetic brake.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 20
- Electromagnetic Brake: Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.8 N·m (5–150 r/min)
1.4 N·m (200 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 5–200 r/min
- Permissible Inertia J: 200×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 24.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.1 N·m
- Motor Section Mass: 0.9 kg
- Gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 Do not start or stop the product by turning the power ON/OFF as this will cause abnormal friction in the electromagnetic brake.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 30
- Electromagnetic Brake: Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 2.6 N·m (3.3–100 r/min)
1.9 N·m (133 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 3.3–133 r/min
- Permissible Inertia J: 370×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 55.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.1 N·m
- Motor Section Mass: 0.9 kg
- Gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 Do not start or stop the product by turning the power ON/OFF as this will cause abnormal friction in the electromagnetic brake.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 50
- Electromagnetic Brake: Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 4.3 N·m (2–60 r/min)
3.2 N·m (80 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 2–80 r/min
- Permissible Inertia J: 920×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Static Friction Torque (Motor Shaft): 0.1 N·m
- Motor Section Mass: 0.9 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
*2 Do not start or stop the product by turning the power ON/OFF as this will cause abnormal friction in the electromagnetic brake.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 100
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 8.5 N·m (1–30 r/min)
6.4 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 1–40 r/min
- Permissible Inertia J: 2500×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 100
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 6 N·m (1–30 r/min)
5.4 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 1–40 r/min
- Permissible Inertia J: 2500×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 10
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 0.85 N·m (10–300 r/min)
0.64 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 10–400 r/min
- Permissible Inertia J: 50×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 6.2×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 15
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.4 N·m (6.7–200 r/min)
1.0 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 6.7–267 r/min
- Permissible Inertia J: 110×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 14×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 200
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 17 N·m (0.5–15 r/min)
12.8 N·m (20 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.5–20 r/min
- Permissible Inertia J: 5000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 200
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 6 N·m (0.5–15 r/min)
5.4 N·m (20 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.5–20 r/min
- Permissible Inertia J: 5000×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.38 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 20
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.8 N·m (5–150 r/min)
1.4 N·m (200 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 5–200 r/min
- Permissible Inertia J: 200×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 24.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 5
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 0.4 N·m (20–600 r/min)
0.3 N·m (800 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 20–800 r/min
- Permissible Inertia J: 12×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 1.55×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.5% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.5% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.5% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
* The UL/CSA mark applies to the motor part. The UL mark applies to the circuit section.The CE mark applies to the motor and circuit parts.
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 100
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase /Three-Phase 200–240 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: Single-Phase: 0.8 A / Three-Phase: 0.45 A
- Power Supply Input Maximum Input Current: Single-Phase: 2.1 A / Three-Phase: 1.2 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 8.5 N·m (0.8–30 r/min)
6.4 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.8–40 r/min
- Permissible Inertia J: 2500×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 100
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase /Three-Phase 200–240 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: Single-Phase: 0.8 A / Three-Phase: 0.45 A
- Power Supply Input Maximum Input Current: Single-Phase: 2.1 A / Three-Phase: 1.2 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 6 N·m (0.8–30 r/min)
5.4 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.8–40 r/min
- Permissible Inertia J: 2500×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 15
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase /Three-Phase 200–240 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: Single-Phase: 0.8 A / Three-Phase: 0.45 A
- Power Supply Input Maximum Input Current: Single-Phase: 2.1 A / Three-Phase: 1.2 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.4 N·m (5.3–200 r/min)
1.0 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 5.3–267 r/min
- Permissible Inertia J: 110×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 14×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 20
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase /Three-Phase 200–240 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: Single-Phase: 0.8 A / Three-Phase: 0.45 A
- Power Supply Input Maximum Input Current: Single-Phase: 2.1 A / Three-Phase: 1.2 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.7 N·m (4–150 r/min)
1.3 N·m (200 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 4–200 r/min
- Permissible Inertia J: 200×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 24.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft Gearhead
- Gear Ratio: 30
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase /Three-Phase 200–240 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: Single-Phase: 0.8 A / Three-Phase: 0.45 A
- Power Supply Input Maximum Input Current: Single-Phase: 2.1 A / Three-Phase: 1.2 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 2.6 N·m (2.7–100 r/min)
1.9 N·m (133 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 2.7–133 r/min
- Permissible Inertia J: 370×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 55.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Parallel Shaft Gearhead
- Gear Ratio: 30
- Electromagnetic Brake: Not Equipped
- Included Cable: Not included
- Power Supply Input Rated Voltage: Single-Phase /Three-Phase 200–240 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: Single-Phase: 0.8 A / Three-Phase: 0.45 A
- Power Supply Input Maximum Input Current: Single-Phase: 2.1 A / Three-Phase: 1.2 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 2.6 N·m (2.7–100 r/min)
1.9 N·m (133 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 2.7–133 r/min
- Permissible Inertia J: 370×10⁻⁴ kg·m²
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 55.8×10⁻⁴ kg·m²
- Rotor Inertia J: 0.087×10⁻⁴ kg·m²
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- Gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
Artikel 1 - 30 von 708