Induktionswendemotoren
- Integrierte Bremse
- Schneller Wechsel der Drehrichtung möglich
- Ausgangsleistung 1-90 W
Artikel 1 - 50 von 399
• Description of Specification Items
• The product name written on the motor nameplate is 0RK1A-AW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.12 A
Single-Phase 100 VAC / 60 Hz / 0.125 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 8 mN·m
Single-Phase 100 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 10 mN·m / 1000 r/min
Single-Phase 100 VAC / 60 Hz: 8 mN·m / 1200 r/min - Capacitor: Product name: CH18FAUL, Capacity: 1.8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 0RK1A-CW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.066 A
Single-Phase 200 VAC / 60 Hz / 0.069 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 8 mN·m
Single-Phase 200 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 10 mN·m / 1000 r/min
Single-Phase 200 VAC / 60 Hz: 8 mN·m / 1200 r/min - Capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 0RK1GN-AW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.12 A
Single-Phase 100 VAC / 60 Hz / 0.125 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 8 mN·m
Single-Phase 100 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 10 mN·m / 1000 r/min
Single-Phase 100 VAC / 60 Hz: 8 mN·m / 1200 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH18FAUL, Capacity: 1.8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 0RK1GN-AW3. The suffix (U) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.09 A
Single-Phase 115 VAC / 60 Hz / 0.095 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 8 mN·m
Single-Phase 115 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 8 mN·m / 1200 r/min
Single-Phase 115 VAC / 60 Hz: 8 mN·m / 1200 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH12FAUL, Capacity: 1.2 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 0RK1GN-CW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.066 A
Single-Phase 200 VAC / 60 Hz / 0.069 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 8 mN·m
Single-Phase 200 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 10 mN·m / 1000 r/min
Single-Phase 200 VAC / 60 Hz: 8 mN·m / 1200 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2RK6A-AW2B. The suffix of the product name above indicates the type of capacitor.
U: Single-phase 110 VAC/115 VAC capacitor included (this product)
J: Single-phase 100 VAC capacitor included. (2RK6A-AW2BJ)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.251 A
Single-Phase 115 VAC / 60 Hz / 0.256 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 45 mN·m
Single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2RK6A-AW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 100 VAC capacitor included (this product)
U: Single-phase 110 VAC/115 VAC capacitor included. (2RK6A-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.257 A
Single-Phase 100 VAC / 60 Hz / 0.307 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2RK6A-AW2MB. The suffix of the product name above indicates the type of capacitor.
U: Single-phase 110 VAC/115 VAC capacitor included (this product)
J: Single-phase 100 VAC capacitor included. (2RK6A-AW2MBJ)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.235 A
Single-Phase 115 VAC / 60 Hz / 0.242 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 45 mN·m
Single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
Single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 110 VAC / 60 Hz / 0.03 A / 3 W
Single-Phase 115 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 2RK6A-CW2B. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2BE)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.12 A
Single-Phase 200 VAC / 60 Hz / 0.138 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 2RK6A-CW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.12 A
Single-Phase 200 VAC / 60 Hz / 0.138 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
• The product name written on the motor nameplate is 2RK6A-CW2MB. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2MBE)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.113 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Ausgangsleistung: 6 W
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 60 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 2RK6A-CW2M. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2ME)
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.113 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.239 A
Single-Phase 100 VAC / 60 Hz / 0.263 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m
Single-Phase 100 VAC / 60 Hz: 50 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 52 mN·m / 1100 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - Capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.119 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 47 mN·m
Single-Phase 200 VAC / 60 Hz: 48 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 52 mN·m / 1100 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Capacitor: Product name: CH10BFAUL, Capacity: 1.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: Single-Phase 110 VAC / 60 Hz / 0.220 A
Single-Phase 115 VAC / 60 Hz / 0.225 A - Starting Torque (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 40 mN·m
Single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 110 VAC / 60 Hz: 39 mN·m / 1490 r/min
Single-Phase 115 VAC / 60 Hz: 39 mN·m / 1490 r/min - Capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 100
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 15 r/min
Single-Phase 100 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 2.7 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 12.5
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 120 r/min
Single-Phase 100 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.5 N·m
Single-Phase 100 VAC / 60 Hz: 0.42 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 9.6×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 10 r/min
Single-Phase 100 VAC / 60 Hz: 12 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 100 r/min
Single-Phase 100 VAC / 60 Hz: 120 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.6 N·m
Single-Phase 100 VAC / 60 Hz: 0.5 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 13.9×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 8.3 r/min
Single-Phase 100 VAC / 60 Hz: 10 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 3 N·m
Single-Phase 100 VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 83 r/min
Single-Phase 100 VAC / 60 Hz: 100 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.71 N·m
Single-Phase 100 VAC / 60 Hz: 0.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 20×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: 30 MInutes
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 50 r/min
Single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.1 N·m
Single-Phase 100 VAC / 60 Hz: 0.9 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 500 r/min
Single-Phase 100 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.12 N·m
Single-Phase 100 VAC / 60 Hz: 0.1 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 0.55×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 60
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 25 r/min
Single-Phase 100 VAC / 60 Hz: 30 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 1.9 N·m
Single-Phase 100 VAC / 60 Hz: 1.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 200 r/min
Single-Phase 100 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.3 N·m
Single-Phase 100 VAC / 60 Hz: 0.25 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 3.4×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 75
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 20 r/min
Single-Phase 100 VAC / 60 Hz: 24 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 2.4 N·m
Single-Phase 100 VAC / 60 Hz: 2 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.244 A
Single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 50 mN·m
Single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 100 VAC / 50 Hz: 167 r/min
Single-Phase 100 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 100 VAC / 50 Hz: 0.36 N·m
Single-Phase 100 VAC / 60 Hz: 0.3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
Single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 5×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 100
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.113 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 15 r/min
Single-Phase 200 VAC / 60 Hz: 18 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 3 N·m
Single-Phase 200 VAC / 60 Hz: 2.7 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 12.5
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.113 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 120 r/min
Single-Phase 200 VAC / 60 Hz: 144 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 0.5 N·m
Single-Phase 200 VAC / 60 Hz: 0.42 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 9.6×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- Series: World K Series
- Type: With Terminal Box
- Gear Ratio: 120
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.113 A
Single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 50 mN·m
Single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
Single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing Gearhead: Single-Phase 200 VAC / 50 Hz: 12.5 r/min
Single-Phase 200 VAC / 60 Hz: 15 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 200 VAC / 50 Hz: 3 N·m
Single-Phase 200 VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
Single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With Gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Artikel 1 - 50 von 399