Induktionsmotoren
- Ideal für Anwendungen, die Dauerbetrieb mit einer Drehrichtung erfordern
- Dreiphasige Motoren mit hohem Wirkungsgrad optimal für den Betrieb an Frequenzumrichtern sind ebenfalls verfügbar.
- Ausgangsleistung 1 bis 200 W
Artikel 201 - 220 von 1138
- Frame Size: 42 mm
- Output Power: 200 VAC / 50 Hz: 2.5 W
200 VAC / 60 Hz: 3 W - Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.057 A
Single-Phase 200 VAC / 60 Hz / 0.064 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 5 mN·m
Single-Phase 200 VAC / 60 Hz: 5 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 9.5 mN·m / 2500 r/min
Single-Phase 200 VAC / 60 Hz: 9.5 mN·m / 3100 r/min - The Speed When Installing Gearhead:
This depends on the gearhead used.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- Capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Item: Specifications
- Insulation Resistance: After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
- Dielectric Strength: After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
- Temperature Rise: A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 75 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity.
- Thermal Class: UL/CSA Standards: 105 (A), EN Standards: 120 (E)
- Overheat Protective Device: Impedance Protected
- Operating Ambient Temperature: -10~+40 °C (Non-freezing)
- Operating Ambient Humidity: 85 % max. (Non-condensing)
- Degree of Protection: IP20
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
• Description of Specification Items
- Frame Size: 90 mm
- Output Power: 40 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.73 A
Single-Phase 100 VAC / 60 Hz / 0.73 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 200 mN·m
Single-Phase 100 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 300 mN·m / 1300 r/min
Single-Phase 100 VAC / 60 Hz: 260 mN·m / 1550 r/min - Capacitor: Product name: CH110CFAUL2, Capacity: 11 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 2.5 kg
- Frame Size: 90 mm
- Output Power: 40 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.73 A
Single-Phase 100 VAC / 60 Hz / 0.73 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 200 mN·m
Single-Phase 100 VAC / 60 Hz: 200 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 300 mN·m / 1300 r/min
Single-Phase 100 VAC / 60 Hz: 260 mN·m / 1550 r/min - Capacitor: Product name: CH110CFAUL2, Capacity: 11 µF, Rated voltage: 250 VAC
- Mass: 2.5 kg
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
Frame Size 80 mm
Shaft/Gear Type Parallel Shaft Gearhead for KII Series
Rotation Direction opposite direction as the motor
- Ausgangsleistung: 25 W
- Motor-Rahmengröße: 80 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
- Motor-Rahmengröße: 80 mm
- optional mit Haltebremse
- Schutzart IP20
- RoHS-konform
- inkl. Kodensator mit Schutzkappe bei Wechselstrommotoren
- inkl. Befestigungsschrauben, Unterlegscheiben und Muttern
Die Drehzahl wird berechnet, indem die Synchrondrehzahl des Motors (50 Hz: 1500 min-1, 60 Hz: 1800 min-1) durch die Getriebeuntersetzung geteilt wird.
Je nach Last ist die tatsächliche Drehzahl 2-20 % niedriger als der hier aufgeführte Wert.
• The product name written on the motor nameplate is 4IK25A-CW2. The suffix of the product name above indicates the type of capacitor.
J: Single-phase 200 VAC capacitor included (this product)
E: Single-phase 220 VAC/230 VAC capacitor included. (4IK25A-CW2E)
- Frame Size: 80 mm
- Output Power: 25 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.26 A
Single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 120 mN·m
Single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
Single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - Capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.5 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
Artikel 201 - 220 von 1138