AC-Motoren
- 4-/ 2-polig
- Ideal für Anwendungen, die Dauerbetrieb mit einer Drehrichtung erfordern
- Dreiphasige Motoren mit hohem Wirkungsgrad optimal für den Betrieb an Frequenzumrichtern sind ebenfalls verfügbar.
- Ausgangsleistung 1 bis 90 W
|
Drehzahl und Drehzahlbereich |
Stoppgenauigkeit | Getriebeeigenschaften |
| Der Induktionsmotor kann mit dem mitgelieferten Kondensators an einer einphasigen Stromversorgung betrieben werden. Ein dreiphasiger Motor benötigt keinen Kondensator. | Wenn der Motor gestoppt wird, tritt ein Nachlauf auf. Der Nachlauf kann reduziert werden, wenn ein Motor mit elektromagnetische Haltebremse oder ein Bremspack SB50W verwendet werden. |
Durch die Kombination von Motor und Getriebe ist es möglich, die Geschwindigkeit auf die gewünschte Geschwindigkeit zu reduzieren oder das Drehmoment zu erhöhen. |
 |
 |
|
Artikel 1 - 8 von 8
• Description of Specification Items
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 6.5 kg
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 1.1 A
Three-Phase 200 VAC / 60 Hz / 1.1 A
Three-Phase 220 VAC / 60 Hz / 0.95 A
Three-Phase 230 VAC VAC / 60 Hz / 0.95 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 1.49 N·m
Three-Phase 200 VAC / 60 Hz: 1.25 N·m
Three-Phase 220 VAC / 60 Hz: 1.23 N·m
Three-Phase 230 VAC VAC / 60 Hz: 1.18 N·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 1.49 N·m / 1250 r/min
Three-Phase 200 VAC / 60 Hz: 1.25 N·m / 1500 r/min
Three-Phase 220 VAC / 60 Hz: 1.23 N·m / 1550 r/min
Three-Phase 230 VAC VAC / 60 Hz: 1.18 N·m / 1600 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 200 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 200 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Overheat Protective Device Type: Thermal protector
- Mass: 6.5 kg
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 500 r/min
Single-Phase 220 VAC / 60 Hz: 600 r/min
Single-Phase 230 VAC / 50 Hz: 500 r/min
Single-Phase 230 VAC / 60 Hz: 600 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.1 N·m
Single-Phase 220 VAC / 60 Hz: 3.4 N·m
Single-Phase 230 VAC / 50 Hz: 4.1 N·m
Single-Phase 230 VAC / 60 Hz: 3.4 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 18×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 417 r/min
Single-Phase 220 VAC / 60 Hz: 500 r/min
Single-Phase 230 VAC / 50 Hz: 417 r/min
Single-Phase 230 VAC / 60 Hz: 500 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 4.9 N·m
Single-Phase 220 VAC / 60 Hz: 4.1 N·m
Single-Phase 230 VAC / 50 Hz: 4.9 N·m
Single-Phase 230 VAC / 60 Hz: 4.1 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 25×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 300 r/min
Single-Phase 220 VAC / 60 Hz: 360 r/min
Single-Phase 230 VAC / 50 Hz: 300 r/min
Single-Phase 230 VAC / 60 Hz: 360 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 6.8 N·m
Single-Phase 220 VAC / 60 Hz: 5.7 N·m
Single-Phase 230 VAC / 50 Hz: 6.8 N·m
Single-Phase 230 VAC / 60 Hz: 5.7 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 50×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 250 r/min
Single-Phase 220 VAC / 60 Hz: 300 r/min
Single-Phase 230 VAC / 50 Hz: 250 r/min
Single-Phase 230 VAC / 60 Hz: 300 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 8.2 N·m
Single-Phase 220 VAC / 60 Hz: 6.9 N·m
Single-Phase 230 VAC / 50 Hz: 8.2 N·m
Single-Phase 230 VAC / 60 Hz: 6.9 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 72×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 200 r/min
Single-Phase 220 VAC / 60 Hz: 240 r/min
Single-Phase 230 VAC / 50 Hz: 200 r/min
Single-Phase 230 VAC / 60 Hz: 240 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 10.3 N·m
Single-Phase 220 VAC / 60 Hz: 8.6 N·m
Single-Phase 230 VAC / 50 Hz: 10.3 N·m
Single-Phase 230 VAC / 60 Hz: 8.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 112×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
- Frame Size: 104 mm
- Output Power: 200 W
- Series: BH Series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Single-Phase 220 VAC / 50 Hz / 1.5 A
Single-Phase 220 VAC / 60 Hz / 1.5 A
Single-Phase 230 VAC / 50 Hz / 1.5 A
Single-Phase 230 VAC / 60 Hz / 1.5 A - Starting Torque (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 0.98 N·m
Single-Phase 220 VAC / 60 Hz: 0.98 N·m
Single-Phase 230 VAC / 50 Hz: 0.98 N·m
Single-Phase 230 VAC / 60 Hz: 0.98 N·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 220 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 220 VAC / 60 Hz: 1.27 N·m / 1500 r/min
Single-Phase 230 VAC / 50 Hz: 1.52 N·m / 1250 r/min
Single-Phase 230 VAC / 60 Hz: 1.27 N·m / 1500 r/min - The Speed When Installing Gearhead: Single-Phase 220 VAC / 50 Hz: 167 r/min
Single-Phase 220 VAC / 60 Hz: 200 r/min
Single-Phase 230 VAC / 50 Hz: 167 r/min
Single-Phase 230 VAC / 60 Hz: 200 r/min - Permissible Torque of Gearhead Output Shaft: Single-Phase 220 VAC / 50 Hz: 12.3 N·m
Single-Phase 220 VAC / 60 Hz: 10.3 N·m
Single-Phase 230 VAC / 50 Hz: 12.3 N·m
Single-Phase 230 VAC / 60 Hz: 10.3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: Single-Phase 220 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 220 VAC / 60 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 50 Hz / 0.09 A / 12 W
Single-Phase 230 VAC / 60 Hz / 0.09 A / 12 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 1.5 N·m
- Permissible Inertia J: 162×10<sup>-4</sup> kg·m<sup>2</sup>
- Capacitor: Product name: CH100BFAUL, Capacity: 10 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector
- Mass: 9.5 kg (With Gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Artikel 1 - 8 von 8