ORIENTAL MOTOR
Artikel 1 - 46 von 46
- Frame Size: 42 mm
- Output Power: 200 VAC / 50 Hz: 2.5 W
200 VAC / 60 Hz: 3 W - Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: Single-Phase 200 VAC / 50 Hz / 0.057 A
Single-Phase 200 VAC / 60 Hz / 0.064 A - Starting Torque (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 5 mN·m
Single-Phase 200 VAC / 60 Hz: 5 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 200 VAC / 50 Hz: 9.5 mN·m / 2500 r/min
Single-Phase 200 VAC / 60 Hz: 9.5 mN·m / 3100 r/min - The Speed When Installing Gearhead:
This depends on the gearhead used.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- Capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Item: Specifications
- Insulation Resistance: After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
- Dielectric Strength: After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
- Temperature Rise: A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 75 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity.
- Thermal Class: UL/CSA Standards: 105 (A), EN Standards: 120 (E)
- Overheat Protective Device: Impedance Protected
- Operating Ambient Temperature: -10~+40 °C (Non-freezing)
- Operating Ambient Humidity: 85 % max. (Non-condensing)
- Degree of Protection: IP20
• Description of Specification Items
• The product name written on the motor nameplate is 0IK3GN-BW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 3 W
- Series: World K Series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination Gearhead.
- Voltage/ Frequency/ Current: Single-Phase 100 VAC / 50 Hz / 0.109 A
Single-Phase 100 VAC / 60 Hz / 0.123 A - Starting Torque (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 6 mN·m
Single-Phase 100 VAC / 60 Hz: 6 mN·m - Rated torque/ Rated Speed (Motor Shaft): Single-Phase 100 VAC / 50 Hz: 12 mN·m / 2400 r/min
Single-Phase 100 VAC / 60 Hz: 10 mN·m / 3000 r/min - The Speed When Installing Gearhead: Depends on the combination Gearhead.
- Permissible Torque of Gearhead Output Shaft: Depends on the combination Gearhead.
- Permissible Inertia J: Depends on the combination Gearhead.
- Capacitor: Product name: CH18FAUL, Capacity: 1.8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 90
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 90
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 75
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 75
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 60
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 60
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 50
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 50
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 36
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 36
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 30
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 30
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3.6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3.6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 25
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 25
- Rotation Direction: same direction as the motor shaft
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 18
- Rotation Direction: opposite direction as the motor
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 18
- Rotation Direction: opposite direction as the motor
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 180
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 180
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 15
- Rotation Direction: opposite direction as the motor
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 15
- Rotation Direction: opposite direction as the motor
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 150
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 150
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 120
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 120
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 12.5
- Rotation Direction: opposite direction as the motor
- Mass: 0.1 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 12.5
- Rotation Direction: opposite direction as the motor
- Mass: 0.1 kg
Imperiale Abtriebswelle 3/16 in (4,7625 mm); Rahmenmaß: 42 mm; Gewicht: 0,20 kg.
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 100
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
- Frame Size: 42 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 100
- Rotation Direction: opposite direction as the motor
- Mass: 0.11 kg
Artikel 1 - 46 von 46